|
| 1 | Providing and fitting fixing of spare contact kits without Coil (L & T make) for Auto Star Delta Starter. |
| 2 | b) ML-2 type. |
| 3 | c) ML-1.5 type. |
| 4 | Providing and fitting fixing of standard operating Coil (L & T make) for Auto Star Delta Starter. |
| 5 | b) ML-2 type. |
| 6 | c) ML-1.5 type. |
| 7 | Providing and fitting fixing Single phasing preventor + selectable under voltage + selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% L&T /BCH /HAVELS /Siemens etc. make complete as per specification and direction of the Engineer-in-charge. |
| 8 | Providing & supplying of Kit-Kat Rewireable Porcelain Fuse (Cut-Out) carrier & base of Havell's made (Delux Quality). |
| 9 | a) 63 Amps/415 Volt |
| 10 | a) 63 Amps/415 Volt |
| 11 | Supplying and fitting fixing of 3 pole power Contractor (Type-ML) suitable for 10 HP to 25 HP motor.i) Type ML-2 (For L&T Make Starter) |
| 12 | Supplying and fitting fixing of Thermal Timer Type GT-200 (L & T make) suitable for 230/250V, 360V, 400/440V, 50 Hz for 5-18 Secs. |
| 13 | Supplying and fitting fixing of Thermal Overload Relays (directly operated& direct mounting on ML-2/3 Contactor) having relay range 9-14A/13-21A of L & T made. (Suitable for ML-2/ML-3 type). |
| 14 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge. |
| 15 | Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the Engineer-in-charge. |
| 16 | Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitor L & T make etc. complete as per specification and direction of the Engineer-in-charge.i) 5-15 kVAr 440 V |
| 17 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 18 | Providing and fitting fixing of moving iron type, Range 0-100/0-200 Amp, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineerin-charge. |
| 19 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havell's/ BCH make etc. complete as per specification and direction of the Engineer-incharge. |
| 20 | i) 63 amps |
| 21 | ii) 100 amps |
| 22 | Providing & fitting fixing with PVC insulated single core multistrand Copper cable confirming to IS 694 for inter connection with all electrical equipment of the panel board as specification and direction of the Engineer - in - charge. i) 16.sqmm. |
| 23 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.i) 25 HP/18.5 kw Relay range within 13-21 + 10% |
| 24 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. |
| 25 | i) 2.50 sqmm. |
| 26 | ii) 4.0 sqmm. |
| 27 | iii) 6.0 sqmm. Please Enable Macros to View BoQ information |
