|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR 2.8 |
| 2 | All kinds of soil DSR 2.8.1 |
| 3 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10 |
| 4 | All kinds of soil DSR 2.10.1 |
| 5 | Pipes, cables etc, not exceeding 80 mm dia. DSR 2.10.1.1 |
| 6 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia DSR 2.10.1.2 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level : DSR 4.1 |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4graded stoneaggregate 20mmnominal size derived from natural sources) DSR 4.1.3 |
| 9 | 1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.10 |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. DSR 6.13 |
| 11 | Cement mortar 1:3 (1 cement :3 coarse sand) DSR 6.13.2 |
| 12 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete DSR 8.5 |
| 13 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixedwith pigment of matching shade complete. DSR 8.31 |
| 14 | Size 300 X 600 mm |
| 15 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike¬ plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer¬ in-charge: DSR 10.14 |
| 16 | Profile B DSR 10.14.1 |
| 17 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nutsand screws etc. complete : DSR 9.96 |
| 18 | 300x16 mm DSR 9.96.1 |
| 19 | Providing and fixing aluminium tower bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. DSR 9.97 |
| 20 | 250x10mm DSR 9.97.2 |
| 21 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with essary screws etc. complete : DSR 9.100 |
| 22 | 125 mm DSR 9.100.1 |
| 23 | Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : DSR 9.56 |
| 24 | 125x90x4.00 mm DSR 9.56.1 |
| 25 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete DSR 9.83 |
| 26 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.1 |
| 27 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR 10.28 |
| 28 | Providing and laying anticid ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mmthick cement mortar 1:4(1 cement : 4coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 29 | Size of Tile 300x300 mm |
| 30 | 12 mm cement plaster of mix : DSR 13.4 |
| 31 | 1:4 (1 cement: 4 coarse sand) DSR 13.4.1 |
| 32 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 33 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : DSR 13.81 |
| 34 | Old work (one or more coats) DSR 13.81.1 |
| 35 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR 13.91 |
| 36 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: DR 14.5 |
| 37 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) DSR 14.5.2 |
| 38 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. DSR 14.82 |
| 39 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge DSR 15.2 |
| 40 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) DSR 15.2.1 |
| 41 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) DSR 15.2.2 |
| 42 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead |
| 43 | For thickness of tiles 10 mm to 25 mm |
| 44 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. DSR 15.7 |
| 45 | In cement mortar DSR 15.7.4 |
| 46 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : DSR 15.44 |
| 47 | 15 mm to 40 mm nominal bore DSR 15.44.1 |
| 48 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: DSR 15.45 |
| 49 | Up to 150 mm diameter D SR 15.45.1 |
| 50 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : DSR 15.12 |
| 51 | Of area 3 sq. metres and below DSR 15.12.1 |
| 52 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead DSR 15.56 |
| 53 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. DSR 15.52 |
| 54 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60 |
| 55 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3 |
| 56 | W.C. pan with ISI marked white solid plastic seat and lid DSR 17.3.1 |
| 57 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 58 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 |
| 59 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : DSR 17.13 |
| 60 | Orissa pattern W.C. pan of size 580x440 mm DSR 17.13.2 |
| 61 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 62 | Kitchen sink without drain board DSR 17.10.2 |
| 63 | 610x460 mm bowl depth 200 mm DSR 17.10.2.2 |
| 64 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. DSR 17.19 |
| 65 | 10 litre (full flush) capacity-white DSR 17.19.1 |
| 66 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 |
| 67 | Flexible pipe DSR 17.28.2 |
| 68 | 32 mm dia DSR 17.28.2.1 |
| 69 | 40 mm dia DSR 17.28.2.2 |
| 70 | Providing and fixing soil, waste and vent pipes : DSR 17.35 |
| 71 | 100 mm dia DSR 17.35.1 |
| 72 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 DSR 17.35.1.2 |
| 73 | 75 mm diameter : DSR 17.35.2 |
| 74 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 DSR 17.35.2.2 |
| 75 | Providing and fixing heel rest sanitary bend DSR 17.40 |
| 76 | 100 mm dia DSR 17.40.1 |
| 77 | Sand cast iron S&S as per IS - 3989 DSR 17.40.1.2 |
| 78 | 75 mm dia DSR 17.40.2 |
| 79 | Sand cast iron S&S as per IS - 3989 DSR 17.40.2.2 |
| 80 | Providing and fixing single equal plain junction of required degree : DSR 17.44 |
| 81 | 100x100x100 mm DSR 17.44.1 |
| 82 | Sand cast iron S&S as per IS - 3989 DSR 17.44.1.2 |
| 83 | 75x75x75 mm DSR 17.44.2 |
| 84 | Sand cast iron S&S as per IS - 3989 DSR 17.44.2 |
| 85 | Providing and fixing terminal guard : DSR 17.56 |
| 86 | 100 mm DSR 17.56.1 |
| 87 | Sand cast iron S&S as per IS - 3989 DSR 17.56.1.2 |
| 88 | 75 mm D SR 17.56.2 |
| 89 | Sand cast iron S&S as per IS - 3989 DSR 17.56.2.2 |
| 90 | Providing and fixing collar : DSR 17.57 |
| 91 | 100 mm DSR 17.57.1 |
| 92 | Sand cast iron S&S as per IS - 3989 DSR 17.57.1.2 |
| 93 | 75 mm DSR 17.57.2 |
| 94 | Sand cast iron S&S as per IS - 3989 DSR 17.57.2.2 |
| 95 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : DSR 17.58 |
| 96 | 100 mm DSR 17.58.1 |
| 97 | 75 mm DSR 17.58.2 |
| 98 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60 |
| 99 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 100 | Sand cast iron S&S as per IS - 3989 DSR 17.60.2.1 |
| 101 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete DSR 17.78 |
| 102 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. DSR 18.10 |
| 103 | 15 mm dia nominal bore DSR 18.10.1 |
| 104 | 20 mm dia nominal bore DSR 18.10.2 |
| 105 | 25 mm dia nominal bore D SR 18.10.3 |
| 106 | 50 mm dia nominal bore DSR 18.10.6 |
| 107 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18 |
| 108 | 25 mm nominal bore DSR 18.18.3 |
| 109 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 110 | 30 cm length DSR 18.21.1 |
| 111 | 15 mm nominal bore DSR 18.21.1.1 |
| 112 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 113 | 20 mm nominal bore DSR 18.46.2 |
| 114 | 25 mm nominal bore D SR 18.46.3 |
| 115 | 50 mm nominal bore DSR 18.46.6 |
| 116 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49 |
| 117 | 15 mm nominal bore DSR 18.49.1 |
| 118 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51 |
| 119 | 15 mm nominal bore DSR 18.51.1 |
| 120 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. DSR 18.52 |
| 121 | 15 mm nominal bore DSR 18.52.1 |
| 122 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR 18.53 |
| 123 | 15 mm nominal bore D SR 18.53.1 |
| 124 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. DSR 18.53A |
| 125 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 126 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 127 | With common burnt clay F.P.S. (non modular) bricks DSR 18.76.1 |
| 128 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. DSR 18.77 |
| 129 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. DSR 18.78 |
| 130 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : DSR 19.1 |
| 131 | 150 mm diameter DSR 19.1.2 |
| 132 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design DSR 19.2 |
| 133 | 150 mm diameter S.W. pipe DSR 19.2.2 |
| 134 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: DSR 19.4 |
| 135 | 100x100 mm size P type DSR 19.4.1 |
| 136 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : DSR 19.21 |
| 137 | For pipes 100 to 250 mm diameter DSR 19.21.1 |
| 138 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: DSR 19.30 |
| 139 | Inside dimensions 455x610 mm and 45 cm deep for single pipe line DSR 19.30.1 |
| 140 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : DSR 22.5 |
| 141 | (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. |
| 142 | (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. |
| 143 | Providing and fixing ISI marked water proof flush door shutters of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungus resistant, eco frindly with 1mm thick Laminated on bot side with phenol formaldehyde resin conforming to IS:848: complete in all respect. |
| 144 | Removing and Refilling of Cinder from depressed portion of toilet and diposal of same from site of work complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 145 | Dismantling of wall tiles complete in all respect. |
| 146 | Providing and fixing of overhead shower with swiveling Joint 125mm dia (min) made of CP Brass/SS/ABS Plastic with arm and flange of approved make Kerovit, Cera, Jal and ESSCO |
| 147 | Providing and fixing of C.P. cup heavy duty make |
| 148 | Supplying and Installation of 400 Ltrs Capacity Drinking Water Cooler having (+10%) following specification, full body stainless steel SS 304, ISI marked of approved make |
| 149 | Storage Capacity: 400 Ltrs |
| 150 | Cooling Capacity: 150 LPH |
| 151 | Tank Material: SS 304, Body SS |
| 152 | BIS Approval IS 1475 |
| 153 | Make Blue Star/Voltas/Climatrol approved by BIS or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 154 | Supplying & Fixing of Water Purifier with 3 Stage Purification system consisting of sediment filter, Activated Carbon Filter and Ultravoilet treatment having purification capacity of 200 LPH, water control sensor for automatic control of purifier as per level of water cooler and valve for back flushing of sediment filter complete of make Aquaguard to the satisfaction of EIC or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 155 | Supplying & Fixing of Voltage Stablizer with MCB, Voltmeter, Ampere Meter Copper Wound complete of approved make capacity 4 KVA or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 156 | Providing and fixing of 5mm thick looking glass with PVC frame beading including cost of screws, rawal plugs complete in all respect |
| 157 | Providing the fixing of CP long bend 32mm I/D for cistern complete in all respect as per entire satisfaction and approval of make by EIC. |
| 158 | P/F of CP Brass/SS Towel Rail 600mm of with screws etc. to satsifaction of EIC of approved make JAL Model No. 36520 Warna or equialent Model of CERA/ Kerovit/Essco |
| 159 | P/F of CP Brass/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No.36540 or equialent Model of CERA/ Kerovit/ESSCO. |
| 160 | P/F of C.P. Brass/SS Towel Ring with screws etc. to the satisfaction of EIC of approved make Jal Model No.36524 Warna or Jal Model of CERA/Kerovit/ESSCO |
| 161 | Providing and fixing of Chinaware Half stall Urinal with fittings, standard size C.P. brass flush pipe, spreaders and clamps all in C.P. brass complete in all respect Cat No. S4020112 Make M-cera size 375x390x590mm or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 162 | Providing and fixing of white vitreous chinaware urinal partitions of size 90x320x720 mm complete in all respect Make M-cera S4090101 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 163 | Providing and Fixing of pressmatic urinal push valve model PRS-077 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 164 | Prov. & fixing 550x 400 mm beveled edge mirror of superiorglass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass of approved make |
| 165 | Construction of Curb consisting of cement concrete 1:2:4 including cost of C.P. hinged grating and cost of sand bajri etc. Please Enable Macros to View BoQ information |
