|
| 1 | Item Description |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. All kind of soil (D.S.R. It. No. 2.28.1/Pg. No. 90) |
| 3 | Taking out existing CC interlocking paver blocks from footpath / central verge including removal of rubbish etc. disposal of unsarvicable material to the dumping ground for which payment maid saperately and stacking of sarvicable mateial within 50 m lead as per direction of engineer-in-charge. (D.S.R. It. No. 16.83/Pg. No. 260) |
| 4 | Dismentling old plaster and pointing in cement or lime and racking of joints to 15 mm depth watering and disposal of unsarvicable material with all leads all complete as per direction of E/I (J.S.R. It. No. 5.10.7/Pg. No. 65) |
| 5 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. (J.S.R. It. No. 5.10.1/Pg. No. 65) |
| 6 | Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. (J.S.R. It. No. 5.10.3/Pg. No. 65) |
| 7 | Earthwork in Excavation in Foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M including all lifts levelling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design building specification and direction of E/I(JSR It No.5.1.1/28) |
| 8 | Granular Sub-Base with Graded Material (Table:- 400-1) Plant Mix Method 4.01 A . Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (ii) Rate per cum for grading-II Material JHRCD 2022-23 It no. 4.01A (ii) |
| 9 | Providing and laying in position cement concrete of spacified grade excluding the cost of centering and shuttering , all works upto plinth level. 1:2:4 ( 1 cement: 2 coarse sand (zone III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size) |
| 10 | Providing or laying at or near ground level factory made kerb stone of M-25 Grade cement concrete in position to required line level and curvature joined with cement morter 1:3 (1 cement: 3 course sand ) including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm including making drainage opening wherever required complete etc as per direction of engineer in charge , length of finished kerb edging shall be measured to calculate volume for payment ( precast cc kerb stone shall be approved by engineer in charge. (DSR It No.16.69/ 258) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete (JSR It No.5.3.17.1/ 37) |
| 12 | Providing Tor steel reinforcement of 10mm , 12mm , 16mm dia rods as per approved -do- TMT FE500 only valid for TATA, (tiskon) SAIL, JSPL, Electro steel Steels Ltd, Bokaro and vizag (RINL) (a) 10 mm (b) 8mm (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} (JSR It No.5.5.5 (a)/ 48) |
| 13 | (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL, Electro steel Steels Ltd. Bokaro and Vizag (RINL)}) JSR It No.5.5.5 (b)/ 48) |
| 14 | (c) 16mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) (JSR It No.5.5.5 (c)/ 48) |
| 15 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) (JSR It No.5.5.4/ 48) |
| 16 | Providing and laying in position spacified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. all works upto plinth level. 1:1.5:3 ( 1 cement: 1.5 coarse sand (zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size) (JSR It No.5.3.9.1/ 36) |
| 17 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. RCD 4.23(B) |
| 18 | Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement. (D.S.R. It. No. 9.20.1) |
| 19 | Providing 12 mm thick plaster (1:4) with clean coarse sand of F.M. 1.5 including screening curing with all leads and lifts of water scafolding taxes and royalty all complete as per building spacification and direction of E/I ) (JSR It No.5.7.2) |
| 20 | Marble stone flooring with 18mm thick marble stone as per sample approved by engineer-in-charge over 20mm thick (average) base of cement morter 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with Makrana white second quality. (D.S.R. It. No. 11.23.1/ Pg. No. 192) |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (D.S.R. It. No. 8.31) |
| 22 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (JSR It No.5.5.35/ 51) |
| 23 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m* (D.S.R. It. No. 12.1.2) |
| 24 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (JSR It No.5.8.45/ 53) |
| 25 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) (JSR It No.5.5.12) |
| 26 | Providing one coat of aluminium paint over steel surface including cleaning the surface throughly, scaffolding and taxes all complete as per building specification and direction of E/I. (JSR It No.5.8.46) |
| 27 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) (JSR It No.5.1.10 |
| 28 | Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 (i) for grading I Material JHRCD 2022-23 It no. 10.05 (i) |
| 29 | Dismantling of flexible pavements and disposal of dismantled materials upto a leadof 1000 metres, stacking serviceable and unserviceable materials separately JHRCD 2022-23 It no. 2.05 |
| 30 | Dense Graded Bituminous Macadam Grading-I with VG-30 Grade Packed Bitumen Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respect JHRCD 2022-23 It no. 5.04 (A) |
| 31 | Retro-Reflectorised Traffic Signs A Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. JHRCD 2022-23 It no. 8.04 (iv) 60 cm equilateral triangle |
| 32 | (vii) 60 cm circular |
| 33 | (xiii)60 cm x 60 cm square |
| 34 | A. Prime Coat over WMM/WBM (i) Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. JHRCD 2022-23 It no. 5.01 A (i) |
| 35 | Tack Coat on Bituminous surfaces Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. JHRCD 2022-23 It no. 5.02(i) |
| 36 | Horticulture Providing and displaying foxtail palm well develop fresh and healthy foliage of ht 210 to 250 cm in 40 cm cement pot as per direction of officer-in-charge. DSR 5.30 horticulture |
| 37 | Providing and stacking phoenix sylvestris Roxb.(wild Date palm/Khajur) of height 150-165 cm. in Big HDPE bag as per direction of officer-in-charge. DSR 7.63 horticulture |
| 38 | Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground. DSR 2.34 horticulture |
| 39 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 40 | DSR 2.2 horticulture Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account. (a) Girth of tree shall be measured at a height of 1m above ground level. DSR 12.1.1 horticulture |
| 41 | Providing and stacking of Polyalthia longifolia (Ashok) of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-in-charge. DSR 7.75 horticulture |
| 42 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. DSR 5.12 horticulture |
| 43 | Providing and stacking of Nerium oleander variegated of height 60- 75 cm.,multibranchrd in earthen pot of size 25 cm as per direction of the officer in charge DSR 8.53 horticulture |
| 44 | Providing and Displaying Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in- charge. DSR 4.37 horticulture |
| 45 | Providing and stacking of Duranta Golden, having ht.15 to 20cm bushy shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. DSR 6.12 horticulture |
| 46 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi- metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approvedshop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.(D.S.R. It. No. 6.30) |
| 47 | Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, including cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete. 16.47.1 New work (Two or more coats) (D.S.R. It. No. 16.47.1/ Pg. No. 232) |
| 48 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. (JSR It No.5.2.14/ 29) |
| 49 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover. |
| 50 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 51 | Electrifiation 3 Core 2.5 Sqmm FR PVC Iinsulated Copper felxible Wire Electric SOR it.no. M-1906 |
| 52 | Modular GI box for 6 Module Electric SOR it.no. M-514 |
| 53 | 3.Pin 5/6 amps, one way modular switch, ISI marked Electric SOR it.no. M-519 |
| 54 | 5 pin 5 / 6 amps modular socket outlet, ISI marked Electric SOR it.no. M-522 |
| 55 | 5 amps. to 32 amps, ratings, SP MCB, \\"8\\" series, 10 KA breaking capacity. Electric SOR it.no. M-624 |
| 56 | 6 amps. to 32 amps, ratings, SP MCB, \\"C\\" series, 10 KA breaking capacity. Electric SOR it.no. M-626 |
| 57 | 6 amps. to 32 amps. rating, TPN, MCB, \\"C\\" serries, 10 KA breaking capacity. Electric SOR it.no. M-626 |
| 58 | 4 way (4+12), TPN, MCB DB, singe door, horizontal type. Electric SOR it.no. M-670 |
| 59 | 10 sq. mm,2 core Electric SOR it.no. M-737 |
| 60 | 6 sq. mm,4 core Electric SOR it.no. M-741 |
| 61 | 16 sq. mm,4 core Electric SOR it.no. M-740 |
| 62 | Providing and fixing following rating and breaking capacity MCCB withj the rmomegnetic release and thermal spreader in existing cubiocal panel board including drilling holes in cubical panel, making connection, etc. as required. Electric SOR it.no. 2.4 25-100 amps, 10KA, fixed thermal setting Electric SOR it.no. 2.4.1 |
| 63 | Supply of 12mtr. High mast in one section Construction 5355 grade as per BIEN 10 025 Top Dia 100mm, bottom dia 360mm, plate thickness 3mm, 12side polygon, galvanisation as per BS EN ISO 1461, base plate dia 520mm, base plate thickness 25mm, GI single spike lighting protection, maximum wind speed 47m/ s as per IS : 875 (Part-III) with 6 nos foundation bols of PCD r145mm TS 600/ 24mm dia/850 mm long. Luminaries carriage : Material for 40 NB ERW Class B - M.S. Pipe, dia of carriage ring 450mm (ID) with 8 arm, welded,2 sections having carrying capacity upto 8 luminaries. Trailing Cable : 5 core 2.5sq.mm. PVC flexible copper conductor Winch/Power Tool : Double drum, SWL 350 Itg with 0.75HP 6 pole single speed integral motor Rope : Grade AISI 1304,7 /19 construction, dia 5mm, BLC 1450 x 2 having 2 nos of continues lrope. Aviation obstruction light: twin dome aviation obstruction lights It CO type as required. (But excluding Feeder Pillar) Electric SOR it.no. M-878 |
| 64 | For 12 mtr. High mast : ITC of the high mast and light fixture with the help of suitable tools and plants, wiring of luminaries with all wiring material like PVC insulated PVC sheathed flexible cable of suitable copper conductor lugs, MCB and all labour & construction of shallow foundation with M25 grade concrete for the high mast considering safe soil bearing capacity of 1mho / mtrs sq. for 12 M High mast. Electric SOR it.no. M-881 |
| 65 | Outdoor stand mounted Feeder Panel with 32amp TP&N, MCB incomer, 45amp TP contactor automatic switching of luminaries, power tool control incommer outgoing terminal etc as reqd. (for high mast) Electric SOR it.no. M-1545 |
| 66 | 12\\" (300mm) metal exaust fan . Electric SOR it.no. M-775 |
| 67 | Recess Mounting LED Round Down light (6/7 W) Electric SOR it.no. M-825 |
| 68 | Wiring for light point fan point /exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular sw'itch, modular plate suitable GI box etc as required Group C Electric Jharkhand SOR 1.3.3 |
| 69 | S.I.T.C of flowing ratlngreccess/surface mounted LED round/square shape Down light luminarie with pressure dleiast housing for single phase supply voltage. Luminarie shall be confirm tolS:10322 part-5/section-2 ot IEC:62T22with all neccssary accessories as required 6W COB baeed round LED light with multiple bem angles (36 degree) Electric Jharkhand SOR 9.3.13 |
| 70 | Supplying and fixing following way, horizontal type three pole and neutral, lsheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bat earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) Electric Jharkhand SOR 2.94 way (4 + 12), Double door, Horizontal type Electric Jharkhand SOR 2.94 |
| 71 | Earthing with G.I. earth pipe 4.5 mtr long . 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Electric Jharkhand SOR 3.2 |
| 72 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of l.l KV grade of size exceeding 35 sq mm but not exceeding 95 sq mm direct in ground in the same trech in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Electric Jharkhand SOR 5.1 |
| 73 | Erection of metallic pole of following length in cernent concrete l:3:6 (l cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre Electric Jharkhand SOR 8.2.1/11.3.1 |
| 74 | S.I.T.C of floowing rating LED Flood lighting luminarie with pressure diecast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC,50Hz. Luminarie shall be confirm to lS:,10322part-5/section-5 and shall be complete with all neccssary accessories as required Electric Jharkhand SOR 9.2 120W LED Flood light Electric Jharkhand SOR 9.2.5 |
| 75 | Plumbing and Maintenance Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58- 60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. (D.S.R. It. No. 26.91 ) |
| 76 | Supplying fitting and fixing good quality well dressed and well seasoned teak wood work in chaukhat in doors , windows skylights fanlights and celetial windows opening including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building spacification and direction of E/I (JSR It No.5.4.2/42) |
| 77 | Supplying fitting and fixing 38mm thick good quality well dressed well seasoned sal wood battened shutters ledged and braced in doors and windows with oxidised iron fittings such as hinges sliding door bolts tower bolts handles or rings hooks and eyes cleats sand block as per schedule taxes and royalty all complete as per building spacification and direction of E/I (JSR It No.5.46) |
| 78 | supplying fitting and fixing 40mm high vitreous white glazed earthen EWC with P trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumber joints spindle stop cock of approved quality weight not less than 450 grams 15mm PVC alkathin pipe 45CM long with brass coupling with both ends and white/black plastic sollid seal and lead of commander cuckoo or other ISS make with hinges or screws etc, painting pipe and cistern etc with two coats of approved paints over a coat of red oxide priming all complete as per building spacification and direction of E/I (b) with 10 litre low level PVC cistern (JSR D.W.S.D It No.3.2.2/125) |
| 79 | Provide and fixing white vitreous china flat back half stall urinal of size 600x350 mm with white PVC automatic flushing cistern with fittings standard size C.P. brass flush pipe spreaders with unions and clamps (all in C.P. brass including painting of fittings as per IS2556 C.I. trap with outlet grating and other coupling in C.P. beass including painting of fittings and cutting and marking good the walls and floors wherever required range of two half stall urinals with 5 litre PVC automatic flushing cistern (JSR D.W.S.D It No.3.2.3/125) |
| 80 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved make supported on painted CI or RS brackets 32mm CI brass waste 15 mm dia CI body Brass spindle stop cock of approved quality of weight not less than 350 grams 32mm PVC waste pipe 750 mm long with brass coupling at one end and making plumber joints etc all complete as per building spacification and direction of E/I (JSR D.W.S.D It No.17.7/266) |
| 81 | Providing and fixing 8 mm dia C.P./S.S jet with flexible tube upto 1 meter long with S.S trangular plate to eureopean type W.C. of quality and make as approved by engineer-in-charge (D.S.R. It. No. 17.16A/ Pg. No. 268) |
| 82 | Providing and fixing G.I. inlet connection for flush pipe connecting to W.C. pan (D.S.R. It. No. 17.22/ Pg. No. 268) |
| 83 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. flexible pipe 32 mm dia (D.S.R. It. No. 17.28/ Pg. No. 268) |
| 84 | (b) mirrors of 6mm thick plate glass bevelled edge mirror including CP brass revolving fittings 3mm ply wood board and CP hinges to fix with mirror 450mmx 300mm size (JSR D.W.S.D It No.3.1.21/107) |
| 85 | Providing and fixing soil waste and vent pipes sand cast iron S&S pipe as per IS:1729 (D.S.R. It. No. 17.35.1/ Pg. No. 269) |
| 86 | Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of 37 mm from wall face and concealed fittings arrangement of approved quality and colour weighing not less than 105 gms. (D.S.R. It. No. 17.71`/ Pg. No. 275) |
| 87 | Providing and fixing clorinated polyvinyl cloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain and brass theaded fittings and fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as direction of engineer-in-charge.15mm nominal dia pipe (D.S.R. It. No. 18.8.1/ Pg. No. 281) |
| 88 | Providing and placing on terrace (at all floor levels) polythelene water storage tank IS:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank . (D.S.R. It. No. 18.48/ Pg. No. 288) |
| 89 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (weight not less than 350gms ) with extra socket all complete as per spacification and direction of E/I (JSR D.W.S.D It No.3.1.5.1/102) |
| 90 | Providing Dustbin 120 Ltr Capacity as per direction of engineer-in- charge complete. Non SOR Quotaion item. |
| 91 | Supply, installation, Testing & Commissioning 6 feet Solar Decorative Bench of 80W – 120W made up of Wooden / GI Powder coating / Steel having battery capacity of 12V / 60-00Ah with 3-5 Mobile Charging Points with Inbuilt WIFI Module for Internet Connectivity and Clear LED back lit Advertising Space with all necessary material complete as required and as instructed by Engineer In charge. Non SOR Quotaion item. |
| 92 | Quotation for supply and installation of outdoor tower clock system. Non SOR Quotaion item. |
| 93 | FRP statue of Dr. Rajendra Prasad Non SOR Quotaion item. |
| 94 | Jharkhand theme bollard light Non SOR Quotaion item. |
| 95 | Supply for signature urban style light poles design Jharkhand design Non SOR Quotaion item. |
| 96 | Quotation Supply for signature urban style light poles design Jharkhand design double arm Non SOR Quotaion item. |
| 97 | Street art painting work Non SOR Quotaion item. |
| 98 | Wall mural Art Non SOR Quotaion item. |
| 99 | Double swing Non SOR Quotaion item. |
| 100 | Wave slide Non SOR Quotaion item. |
| 101 | See Saw 2 seater Non SOR Quotaion item. |
| 102 | AC EV charger 7.4 Kw type 2 Non SOR Quotaion item. |
| 103 | Supply, installation, Testing & Commissioning of any type of artistic animal form to be made in translucent polymer of special grade so that uniform glow of the desired colour is achieved from the surface of the polymer. This should artistically be installed in a form to create glow and aesthetics to these unique elements of nature. These animal forms to be illuminated using special looped LED lights embedded inside the polymer to provide effective and natural looking glow to the animal form. DC24V IP67 LED Driver should be provided seperately for Each animal. Each animal should be installed on concrete base structure using anchor bolt.with 3 years warranty. The polymer to be sculpted/formed in the desired artistic shape of illuminated Tiger/Lion/Deer/Giraffe or any Other animal as instructed by Engineer In Charge shaped sculpture with Minimum Height of 4-6 feet x proportionate width. Non SOR Quotaion item. |
| 104 | labour |
| 105 | Gardener |
| 106 | Electricity |
| 107 | Carriage of materials including loading, unloading, stacking -do- - do- all complete job as per specification and direction of E/I.(ii) Sand |
| 108 | (iv) Disposal of cutted earth 5 KM |
| 109 | (v) Moorum/Dust |
| 110 | (vi) Bricks |
| 111 | Add 18% GST |
| 112 | Labours Cess 1 % Please Enable Macros to View BoQ information |
