|
| 1 | Permanent fixing of GI line - 200mm GI |
| 2 | 100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. |
| 3 | 100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals. |
| 4 | 100.25.5:Cutting of 200mm AC pipes of all classes diametrically, the cut being diametrically perpendicular to the axis of pipe and smoothening of the cut ends etc., complete. |
| 5 | 100.99.7:Dismantling 200 mm ACpipe 8 (Rate 50% of 100.23.1.6.- Laying Charge) |
| 6 | OD320703/2025-2026:Supply of 200 mm CID joint with accessories. |
| 7 | OD320699/2025-2026:Plugging the existing 200 mm AC line by placing the dummy pipe filled with concrete in line and level with existing pipe, jointing both ends with CID joint, making water tight joint etc complete including making charges of dummy using department pipe, conveying, jointing charges etc but excluding with excavation and refilling charges, cutting and dismantling charges of AC pipe, cost of CID joints etc complete as per the direction of engineer in charge. |
| 8 | OD324609/2025-2026:Supplying ISI marked good quality 150 mm GI pipe (Medium) at site. |
| 9 | OD325026/2025-2026:Supplying 150 mm x 90 degree short body GI bend (Medium) at site. |
| 10 | 100.12.11:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 150mm diameter nominal bore. |
| 11 | 100.37.6.3:Cutting 150mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 12 | 100.37.6.4:Welding 150mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 13 | 100.37.6.5:Grinding cut and weld edges of 150mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 14 | 100.37.6.2:Fabricating M.S. flanges of diameter 150mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 15 | 18.30.4:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:150 mm diameter pipe |
| 16 | 100.98.446:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Double Orifice Type DS2, Size 50mm. |
| 17 | 100.32.3:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 50mm Double Acting Air Valve. |
| 18 | 100.98.1008:Engaging Coolie. |
| 19 | OD303890/2025-2026:Jointing newly laid 150 mm GI pipe with existing 200mm AC pipe pipe by disjointing CID joint in dummy pipe, dismantling the dummy pipe, supplying 200 x 150 mm MS reducer, jointing with existing 200 mm AC pipe using dismantled CID joints and jointing with newly laid 150 mm GI pipe by welding work, making the joint water tight etc including cost of MS reducer, dummy dismantling charges, fixing charges of reducer, all labour charges, conveyance charges, hire charges of tools etc but excluding cost of CID joints, excavation and refilling charges etc complete as per the direction of engineer in charge. |
| 20 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 21 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 22 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more Please Enable Macros to View BoQ information |
