|
| 1 | Providing and supplying of Garden bench (Victorian) at site both side of garden bench is made of cast iron having back height of 720 mm and seating height of 390 mm (approx.) it may vary at some places and both side of Garden bench is connected with 10 Nos. MS tube of rectangular section size 65×25×3mm having length of 1520 mm for seating purpose with extra support 25×5 mm MS flat for extra stability. All sharp and rough edges of bench is to be grinded with grinder and all fill up with m-seal, and fixed at required position and this bench is having the provision of hold & fast system weight not less than 95Kg (for grouting) bench is complete with a coat of 1st class red oxide and with three coats of synthetic enamel of 1st class quality paint in green colour finally bench is assembled with nuts and fixing at the site complete with the direction of E-I-C. |
| 2 | Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. Good soil of earth |
| 3 | Spreading of manure , good earth in required thickness (cost of manure and good earth to be separately ) |
| 4 | tulqfo/kkvksa dh lkQ lQkbZ dk dk;Z laosnd }kjk lQkbZ gsrq vko';d lkeku tSls >kM+w] fQukbZy] dhVuk'kd nokbZ bR;knh dh O;oLFkk vius Lrj ij djuh gksxh foHkkx }kjk vyx ls dksbZ Hkqxrku ns;h ugh gksxk A |
| 5 | Repair & maintenance of water cooler including replacement of all type of parts,electric work , gus filling and as per requirement, as per direction of engineer-in-charge. |
| 6 | Sprinkling of water on jogging track, every day on full length of jogging track as per direction of engineer-in-charge. |
| 7 | Security of the garden per gate for 24 hours in 3 shift with the exilitary persons |
| 8 | Construction of Jogging work on existing track using clay sand mix (design as approved by Rajasthan sports council) including grinding of clay and mixing by mechanical means preparation of bed. Laying clay mix mechanically (hydraulic system) and compacting using roller making surface leveled and even including cost of water hire charges all T&P complete in all respect as per direction of Engineer in charge. |
| 9 | Laying of lawns including ploughing leveling breaking of clods manuring and removal of stones etc. (cost of manure or extra good earth to be paid separately )maintenance of lawn foe 30 days or more till the grass forms a thick lawns free from weeds and fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost |
| 10 | In rows 15 cm apart in either direction |
| 11 | nwc dk la/kkj.k dk;Z &yxh gqbZ nwc dk la/kkj.k dk;Z esa [kjirokj fudkyuk] fu;fer flapkbZ djuk] [kkn Mkyuk ,oa e’khu ds }kjk fu;fer dVkbZ djuk rkfd nwc vPNh rjg ls fodflr gks ldsA |
| 12 | Maintenance of Hedge, Climbers, Shrubs at parks including watering, trimming, preparation of thawala, manure and complete work. |
| 13 | Regular Operation, Security & Maintenance with material of existing different type of fountain at various circles work includes follwoing operations: 1. Maintain the power supply from LT line to meter panel to Fountain panel to lights and motor. 2. Replacement/maintenance of damage cable/wire of any size. 3. Replacement of damage MCB/main Switch of fountain panel of any rating. 4. Repair /rewinding of damage Motor. 5. Repair/Replacement of damage nozzles with similar one and pipes and pipes and any other material used in fountain for operation. 6. Cleaning of water sink/tank of Fountain 7. Repair/maintanance of various lights of Fountain including material required for Replacement/repair at the cost of contractor complete in all respect. |
| 14 | Maintenance, Repairing etc. of all type of rides & Jhoola’s including welding, hampering, lampering, nut bolts, fibre, etc. Complete in all respect as per direction of Engineer in Charge. |
| 15 | Prunning & trumming and cutting of old big trees on the road side The contractor will deposit the cut wood in the Deptt. |
| 16 | laosnd }kjk fuEu çtkfr;ksa ds 'kcZl dh vkiwfrZ ,oa yxkukA ikS/kk LoLFk gksuk pkfg,A ikS/kksa dh Å¡pkbZ 0-40 ls 0-50 eh- rd A |
| 17 | Lalri /Anermi /Golden Duranta |
| 18 | Crape Myrtal /Hemelia /Lantana Selloviana /Lantana Yellow /Rukmani /Gaudichaudi |
| 19 | Jade Plant /Aclypha Tricolor /Kaner Dwarf /Copper Plant /Gudhal /Chandni/ Kamini Muraya /Callindra Pink Off. |
| 20 | Pedilanthus /Laila Majnu |
| 21 | Planting of trees /shrubs/ hedge and climbers plants at desired distance in row and watering |
| 22 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 23 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 24 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 25 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 26 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Hot rolled deformed bars (IS : 1139). |
| 27 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 28 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. |
| 29 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 30 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) |
| 31 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision New Work |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 33 | Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10m height with 20 to 30 mm thick Red Sand Stone (Karauli ) and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing by means of cramps which shall be paid separately) Exposed face machine cut |
| 34 | Single piece of stone element with carving work in Bansi Paharpur stone includes stone pillar, stone base, todies and thabi etc carving work as per direction of engineer in charge |
| 35 | SITC of Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 36 | 2.0 HP, 3-Ø, (6-27)Mtr, (425-100) LPM |
| 37 | SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . For single phase Submersible / Monoblock pump |
| 38 | 2.0 HP to 3.0 HP (DOL starter) |
| 39 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 40 | 2.5 Sq.mm 3 core flat / Round |
| 41 | Providing & Fixing of IP - 65 protected impact resistant polycarbonate / Polysterene enclosures with knock out for cable entry/out including fixing with nut, bolt, fatner etc as required complete in all respect of following sizes.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 42 | 320 x 640 x 179 mm |
| 43 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 44 | P.V.C.heavy duty, 15mm nominal bore. |
| 45 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
| 46 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size: 150mm dia Please Enable Macros to View BoQ information |
