|
| 1 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:-(As per TSR 2021, Sl- 201) |
| 2 | Short point:- |
| 3 | Medium point:- |
| 4 | Long point:- |
| 5 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC casing capping etc. as required:- (As per TSR 2021 Sl- 205) |
| 6 | 2 x 1.5 sq.mm |
| 7 | 2 x 2.5 sq.mm |
| 8 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-(As per TSR 2021 Item no-1101) |
| 9 | Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):- |
| 10 | Surface mounted round/Square shaped 18/20 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 11 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-(As per TSR 2021 Item no-1103) |
| 12 | 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):- |
| 13 | 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 14 | Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:(As per TSR 2021 Item no-816) |
| 15 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:-(As per TSR Item no-821) |
| 16 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required:(As per TSR Item no-831) |
| 17 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.(As per TSR 2021 Item no-1208) |
| 18 | 4 way SPN MCB DB (single door):- |
| 19 | Supplying & fixing of following ratings MCB B/C curve having breaking capacity 10 KA in the existing MCB DB including connection as required:-(As per TSR 2021 Item no-1215) |
| 20 | 6 to 32 amps SP MCB:- |
| 21 | Supplying & fixing of following ratings isolator in the existing MCB DB including connection etc as required:-(As per TSR 2021 Item no-1217) |
| 22 | 40 amps DP isolator:- |
| 23 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):--(As per TSR 2021 Item no-1102) |
| 24 | 45 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 25 | 60 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 26 | Supplying and laying of the following XLPE insulated PVC sheathed alluminum armoured cable including connection etc as required.(As per TSR 2021, Sl- 1301) |
| 27 | 3 core 4 Sq mm |
| 28 | Drawing of armoured / un-armoured cable with proper saddeling etc as required:-(As per TSR 2021, Sl- 1511) |
| 29 | Excavation of earth for cable trench of 800mm depth & 300mm width in all kinds of soil including back filling of cable trench with the excavated soil with 20cm layer of sand, 3.5 nos bricks per metre for protection including ramming, consolidating to the original shape as per dirrection of Site Engineer :--(As per TSR 2021, Sl- 1510) |
| 30 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:-:-(As per TSR 2021 Item no-1502) |
| 31 | Supplying and fixing of the following PVC conduit (medium gauge) with all accessories on slab/recessed on wall etc as required.-(As per TSR 2021 Item no-603) |
| 32 | 19/20 mm dia |
| 33 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required.(As per TSR 2021 Item no-604) |
| 34 | Ceiling rose |
| 35 | Angle/batten holder |
| 36 | Supplying and fixing of the following sizes PVC switch boards with cover etc. as required.(As per TSR 2021 Item no-606) |
| 37 | 75mm x 75mm (3\\" X 3\\") :- |
| 38 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required.(As per TSR 2021 Item no-608) |
| 39 | 1-2 module :- |
| 40 | Supplying and fixing of the following modular accessories including necessary connection etc. as required.(As per TSR 2021 Item no-609) |
| 41 | 6/10 amps one way SP switch (1M) :- Please Enable Macros to View BoQ information |
