Name of Work:- Construcion of Dias and Judge Chair in Court Complex Shahpura, Jaipur.
Sl. No.
Item Description
1
Providing making and fixing dias table furniture (Racks & leg supports of dias table) by jointing made of 25mm thick Block board of approved ISI make and laminated with 1mm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhesive, nails, screws rawl plugs etc. edges of all these members are restored by fixing of plain/moulded teak wood 27x10 mm beading with the help of nails, adhesive ete complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer-in- charge (Area of block board will be measured horizontal & vertical for payment).
2
Providing making and fixing dias table furniture (lop of dias table) on rack support made of 35mm thick Block board of approved ISI make and laminated with 1min thick laminated sheet on both sides matching with wall panelling shade and design by means of adhesive, nails, screws rawi plugs etc. all the edges of table top are restored by fixing of moulded teak wood 37x25 mm beading with the help of nails, adhesive etc complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer-in-charge (Top plan area of block board will be measured for payment)
3
Providing making & fixing table almirah shutters made of 25mm thick Block board of approved ISI make and laminated with 1mm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhesive, nails, screws rawi plugs ete edges of all these members are restored by fixing of plain/moulded teak wood 27x10 mm beading with the help of nails, adhesive etc complete with melamine polish for and required stainless steel fittings such as hinges handle, lower bolts, magnet & chains & lock (Godrej make) etc for all sizes as per drawing and the direction of Engineer-in-charge (Area of block board will be measured horizontal & vertical for payment).
4
Providing, making and fixing ghana teak wood-grade-I frame for dias with 3\\"x2\\" main battens at 60cm c/c spacing, 3\\"x2\\" cross battens at 60cm c/c spacing and 3\\"x3\\" wooden legs at every junction including antitermite treatment, cost of material and labour completed with all repect as per drawing and the direction of Engineer-in-charge
5
Providing, making and fixing dias furniture (top and sides) by jointing, made of 25mm thick block board of approved ISI make and laminated with 1mm thick laminated sheet on one side matching with wall panelling shade and design by means of adhesive, nails, screws rawi plugs etc edges of all these members are restored by fixing of plain/moulded teak wood 27x10 mm beading with the help of nails, adhesive etc complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer-In-charge (Area of block board will be measured horizontal & vertical for payment).
6
Supplying and placing of Judge chair made in Ghana Teak wood grade- 1.Seating H 20\\" x D 21\\" x 24\\" and Bracekts H 50\\" x W 21\\" with full arms and Handle 3\\" and Legs 3\\" with wooden structure. The seat should be made of 18mm MR Grade plywood and back should be made of 12 mm plywood and frame, legs, handle should be of complete sagwan wood with Melamine Polish. The seat Cushion of the chair should be made up of 50mm thick High Density of 40+2 kg.Cub.M and back cushion should be made up of 38mm thick High Density 32+2 kg./cub.M and good quality approved valvet fabric. Including cost of material and labour completed with all repect as per direction of Engineer incharge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
