|
| 1 | 150mm GI laying work |
| 2 | 15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road |
| 3 | 100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. |
| 4 | 100.9.11:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 160 mm nominal outside diameter pipes. |
| 5 | 100.98.226:Supply of PVC Pipe, 8kg/cm2, 160mm Dia. |
| 6 | OD318388/2025-2026:Jointing newly laid 160mm pvc line with the existing line |
| 7 | OD318573/2025-2026:Supply of 150mm dia 45 degree PVC bend |
| 8 | OD338330/2025-2026:Supply of 150mm dia 90 degree pvc bend |
| 9 | OD318750/2025-2026:Providing and fixing fabricated MS fittings for suitable placing in position of Rigid GI pipes, including jointing with nut and bolt |
| 10 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 11 | OD346032/2025-2026:Supply of 150mm GI pipe |
| 12 | 100.12.11:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 150mm diameter nominal bore. |
| 13 | OD346133/2025-2026:Dismantling of existing DI pipe |
| 14 | OD346148/2025-2026:Interconnecting 150mm GI to 160mm pvc pipe including hire of tools and labour charge |
| 15 | OD655/2026-2027:Supply of 150mm GI bend |
| 16 | 100.37.6.2:Fabricating M.S. flanges of diameter 150mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates. |
| 17 | OD2344/2026-2027:Supply of of 150mm GI threaded coupling |
| 18 | 100.37.1:Cutting M.S. sheet, pipe and specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete. |
| 19 | 100.37.3:Welding M.S. sheet, pipe and special by gas or electric plant for three run welding including cost of welding rod / gas, all labour and hire charges of tools etc., complete. |
| 20 | 100.37.2:Grinding the cut edges / welded portions in M.S. sheet, pipe and specials by grinding machine including all labour and hire charges of tools etc., complete. Please Enable Macros to View BoQ information |
