|
| 1 | Distempering with 1st quality acrylic distemper, (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand required, even shade and colour |
| 2 | Old work (one or more coats) |
| 3 | White washing with lime to give an even shade : |
| 4 | Old work (one or more coats) |
| 5 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 6 | One coat |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 8 | One or more coats on old work. |
| 9 | Providing and applying white cement based putty of average thickness 1 mm @ 6kg/10 sqm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Finishing walls with water proofing cement paint of required shade : |
| 11 | Old work (one or more coats @ 2.20 kg/10 sqm) complete |
| 12 | Finishing walls with textured exterior paint of required shade : |
| 13 | Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 15 | With cement mortar 1:4 (1cement: 4 coarse sand) |
| 16 | Coarse aggregate (bajri) (20 mm nominal size) |
| 17 | Portland Cement (OPC-43 Grade) (50 Kg pack) |
| 18 | White cement (1 kg pack) |
| 19 | Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles |
| 20 | Brass hasps and staples (safety type) 90 mm |
| 21 | Stainless steel SS grade 304, curtain rod 25 mm dia 1.20 mm thick |
| 22 | Stainless steel SS grade 304, brackets ( curtain rod) 25 mm dia 1.20 mm thick |
| 23 | Oxidised mild steel double acting spring hinges 150 mm |
| 24 | Anodised Aluminium sliding door bolt 250x16 mm |
| 25 | Anodised Aluminium sliding door bolt 200x16 mm |
| 26 | Anodised Aluminium tower bolt (barrel type) 200x10 mm |
| 27 | Anodised Aluminium tower bolt (barrel type) 150x10 mm |
| 28 | Glazing Putty for wood work ( 1 kg pack) |
| 29 | Fine sand (Zone -IV) |
| 30 | 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C. |
| 31 | Mirror of superior make glass 60x45 cm with 4 no. Holes (Bevelled edge) |
| 32 | Hardboard 6 mm thick, 60x45 cm with 4 holes |
| 33 | G.I. Union 15 mm nominal bore |
| 34 | G.I. Union 20 mm nominal bore |
| 35 | G.I. Union 25 mm nominal bore |
| 36 | G.I. Union 32 mm nominal bore |
| 37 | Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 38 | White plastic seat cover (solid) with lid C.P.brass hinges and rubber buffers |
| 39 | Vitreous china lipped front urinal |
| 40 | 20 mm dia Gunmetal gate valve with wheel |
| 41 | White Vitreous china flat back wash basin 630x450 mm or Oval type wash basin 450 mm dia |
| 42 | C.P. Brass waste 32 mm (Half/full thread) |
| 43 | C.P. Brass waste 40 mm (Half/full thread) |
| 44 | Vitreous china pedestal type water closet (European type W.C. pan) conforming to IS : 7231 complete. |
| 45 | Vitreous china orrisa type W.C. pan of size 580 mm |
| 46 | Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 47 | Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) |
| 48 | Aluminium die cast body tubular type hydraulic door closer IS : 3564 marked with necessary accessories and screws etc. complete. |
| 49 | 8 mm thick granite stone tiles (mirror polished of all shades) |
| 50 | 8 mm thick Udaipur green marble tiles (polished) |
| 51 | 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I. |
| 52 | Aluminium hanging floor door stopper with twin rubber & stopper |
| 53 | Stainless steel kitchen sink - with drain board 510 x 1040mm bowl depth 225 mm. |
| 54 | Stainless steel kitchen sink - without drain board 610 x 510mm bowl depth 200 mm. |
| 55 | CP Brass 32mm size Bottle Trap |
| 56 | C.P. Brass bibcock 15 mm |
| 57 | C.P. Brass long body bibcock 15 mm |
| 58 | Granite Black marble, 18 mm thick slab, above 0.2 sqm up to 0.5 sqm (areawise) |
| 59 | Alumn sections and snap beading powder coated |
| 60 | P.V.C. automatic flushing cistern 10 litre capacity |
| 61 | Neoprin/ EPDM rubber gasket |
| 62 | Double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked with stainless steel cover plate. |
| 63 | 15 mm PTMT bib cock |
| 64 | PTMT bib cock long body of approved quality and colour 15 mm nominal bore, 165mm long. Weighing not less than 110 gms with flange |
| 65 | PTMT pillar cock of approved quality and colour 15mm nominal bore, 107mm long. Weighing not less than 110 gms. |
| 66 | PTMT grating 100 mm dia |
| 67 | 12mm thick prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade). |
| 68 | PTMT Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. |
| 69 | PTMT Ball Cock 15 mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 70 | PTMT Ball Cock 20 mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 71 | PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms with Flange 15mm |
| 72 | Ceramic glazed tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown. |
| 73 | Ceramic glazed tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown. |
| 74 | G.I. Metal Lay-in false ceiling tiles of size 600 x 600 x15 mm thick White colour micro look type RH-100% with light reflection of 62% |
| 75 | Vitrified floor tile of size 60 x 60 cm |
| 76 | Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm |
| 77 | C.P. Angle cock 15 mm with wall flange |
| 78 | C.P. Brass bibcock 15 mm |
| 79 | C.P. Brass stop cock (concealed) 15 mm |
| 80 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 81 | G.I Elbow 15 mm |
| 82 | G.I Elbow 20 mm |
| 83 | G.I Elbow 25 mm |
| 84 | G.I Elbow 32 mm |
| 85 | G.I. Hexa Nipple 15 mm |
| 86 | G.I. Hexa Nipple 20 mm |
| 87 | G.I. Hexa Nipple 25 mm |
| 88 | G.I. Hexa Nipple 32 mm |
| 89 | G.I Socket 15 mm |
| 90 | G.I Socket 20 mm |
| 91 | G.I Socket 25 mm |
| 92 | G.I Socket 32 mm |
| 93 | G.I Plug 15 mm |
| 94 | G.I Plug 20 mm |
| 95 | G.I Plug 25 mm |
| 96 | G.I Plug 32 mm |
| 97 | G.I.Tee 15 mm |
| 98 | G.I.Tee 20 mm |
| 99 | G.I.Tee 25 mm |
| 100 | G.I.Tee 32 mm |
| 101 | G.I. Pipe 15 mm (20' length) |
| 102 | G.I. pipe 20 mm (20' length) |
| 103 | G.I. pipe 25 mm (20' length) |
| 104 | CP Pillar tap swan neck |
| 105 | C.P. Brass Connection 15mm dia 450 mm long |
| 106 | C.P.Central hole basin mixer with pop up waste system with 450 mm long braided hoses |
| 107 | C.P. Soap dish (polycarbonate) |
| 108 | C P Towel rail 600 mm long |
| 109 | C P Towel Ring Round |
| 110 | C P Toilet paper holder |
| 111 | CP Flush cock 25 mm (with wall flange) |
| 112 | Tinted glass sheet of nominal thickness 5mm. |
| 113 | Aluminium handle 200 mm |
| 114 | Aluminium handle tubular 200 mm |
| 115 | PVC Towel rail 600 mm long |
| 116 | Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore (For cold water) |
| 117 | Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore (For hot water) |
| 118 | Iron Hinges 4\\" |
| 119 | Hexa Blade (Single side) |
| 120 | Sand paper |
| 121 | Wooden Screw ¾\\" (100 no) |
| 122 | Wooden Screw 1½\\"(100 no) |
| 123 | Wooden Screw1¼\\"(100 no) |
| 124 | Wooden Screw 2\\"(100 no) |
| 125 | Steel Screw ¾\\"(100 no) |
| 126 | Steel Screw 1½\\"(100 no) |
| 127 | Steel Screw 2½\\"(100 no) |
| 128 | Silicon sealent (Not less than 280 ml) |
| 129 | Nails 1\\" long (19 no.) |
| 130 | Nails 2\\" (14 no.) |
| 131 | Hanger 6-legged coat hooks |
| 132 | Star bit |
| 133 | Steel bit 4mm |
| 134 | Concrete bit 8 mm |
| 135 | Concrete bit 12 mm |
| 136 | Safeda (1 kg. packing) |
| 137 | Knob / lever of PVC cistern |
| 138 | M seal (250 gm packing) |
| 139 | PVC Tank cover for 1500 ltr capacity PVC water tank |
| 140 | PVC Tank cover for 1000 ltr capacity PVC water tank |
| 141 | PVC Tank cover for 500 ltr capacity PVC water tank |
| 142 | Dhaga |
| 143 | Development of Bore well (200mm dia & 200' deep) of Rain water Harvesting System with air compressor minimum capacity 1100 CFM at 350PSI or as per requirement at site complete in all respect as per directions of E.I.C. |
| 144 | Rate/AOR approved in the estimate of \\"Cleaning of bore well…\\" |
| 145 | Cleaning of chocked Sewerline/Rain water lines by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of Raod gullies and dechocking of Rain water lines. Dechocking and flushing of Rain watre lines from one Road gully to another by high pressure jetting system of 2200 PSI for Rain water line from 150mm dia upto 300mm |
| 146 | Add water charges |
| 147 | Attending day to day Masonary work complaints like laying of brick work/plaster work/PCC/RCC work, dismantling of PCC/RCC brick work/doors & windows with chowkhats, repair of CC / granite / marble / ceramic flooring, repair of wall tiles with the all required T & P complete as per direction of Engineer-in- Charge. |
| 148 | Attending day to day Carpenetry work complaints like fixing & refixing sliding door bolts, tower bolts and handles, repair of door windows etc. with the help of carpenter with the all required T & P complete as per direction of Engineer-in- Charge. |
| 149 | Providing service of beldar as & when required to assist Carpenter and Mason including cleaning and other misc. works i/c necessary T & P etc. all complete as per direction of Engineer-in-charge. |
| 150 | Attending day to day Sewerage complaints like blockage of drains, WCs etc with the help of sewerman i/c all required T & P complete as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
