|
| 1 | SITC of steel tabular poles as per 410 SP 15 with base plate of size 1.5'x1.5'x8 mm with GI rod for earthing, painting etc |
| 2 | Erection of metallic pole of following length in cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. As required. |
| 3 | Above 6.5 metre and upto 8 metre |
| 4 | Supply and laying of ACSR Aluminium conductor 0.05 with jumpering and termination works |
| 5 | Supplying and erection of galvanised Muky iron clamps complete with shackle insulator (75 mm X 90 mm),G. I. bolts, nuts and washers, coach screws etc. as required. |
| 6 | S/l of Guy with turn buckler and Guy insulator etc, 8 SWg twisted GI wire laid in cement concrete . Complete job in all respects. |
| 7 | P/f of PVC Al cable un armored XLPE 3.5 core 185 Sq MM/Havells/Polycab/Finolex |
| 8 | P/f of PVC Al cable un armored XLPE 3.5 core 35 Sq MM/Havells/Polycab/Finolex |
| 9 | Supplying and laying of following size DWC HDPEpipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, Part IIcomplete with fitting and cutting, jointing etc.direct inground (75 cm below ground level) includingexcavation and refilling the trench but excluding sandcushioning and protective covering etc., complete asrequired. |
| 10 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 11 | Chemical earthing GI 3 Mtr Long 65-80MM with pit and drilling etc , earthing compound included . Pit Cover . Complete job in all respects. |
| 12 | Supply,Installation,Testing and Commissioning ing,Installation,Testing and Commissioning of Cubical Type Main LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC including Incomers,Out Goings,Bus Bars,Interlocking etc. as required as per the Following Description.(IP:66) Size 1200x1200x600mm Incomer/OutgoingThermal Magnetic Based MCCB 400 Amps FP Icu=Ics=100% with Breaking Capacity 50 KA (01 Nos)Indicating Lamps RYB (1 Set)Voltmeter-0-500 Volts(1 Nos)Ammeter(0-150 A)(1 Nos)Selector Switch (2 Nos)Current Transformer 100/5 A 10 VA Burden, Class-1(1 sets)Aluminium Busbar 500 Amps FP E-91 E Grade Electrolytic AluminiumMCB TPN 100 A = 3 No , Indicating Lamps ON OFF TRIP Load Bearing Members to be made out of 2.0 mm CRCA Sheet.Partitions to be made out of 1.6 mm CRCA SheetGland Plates to be 3.0 mm Thick. |
| 13 | Note:- The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work till complete in all respects. Please Enable Macros to View BoQ information |
