Name of Work:- rhu ikdZ ls chek gkWfLiVy ds ihNs bZMCY;w DokVlZ o frdksuk ikdZ ds vkl&ikl lh0lh0ekxZ fuekZ.kA
Sl. No.
Item Description
1
Construction of Granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheeled roller to achieve the desired density, complete as per clause 401.
2
Providing, laying, spreading and compacting stone aggregates of specific sizes 22.4-53mmto water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification Clause 405.
3
Construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregates not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix, laid in approved fixed side form work (steel channel) laying and fixing of 125 micron thick plastic sheet,wedges steel plates including levelling the form work as per drawing) spreading the concrete with shovels, rakes compacted using needle screed and plate vibrators and finished in continuous operation including provision of contraction and expansion construction joints applying debonding strips primer, sealent admixture as approved curing complete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 as per MORD 6.4 (1500)
4
Providing and Laying of I-Shaped Precast Interlocking Tiles Concrete Block Pavements having thickness 80 mm(Grey) compressive strength not less than 30Mpa and weight 4.50Kg including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work as per drawings and Technical Specification Clause 1504.
5
Supply and Fixing of Informatory Sign Board including Painting & Lettering etc. as per given specification complete work at site. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
