|
| 1 | Scrap Matriels |
| 2 | Used 20 Lit.cap.Empty Paint Tin. |
| 3 | Cond.Plastic Polythene Paper Cutting |
| 4 | Cond.Diesel Tubes,Air Tubes,OilTubes and Nozzle Tubes(Metal) |
| 5 | Cond.Gear Wheel Items. |
| 6 | Used 210 Lit.Cap Empty Oil MS.Barrel |
| 7 | Used M.S Big Water Tank(Lorry Tank). |
| 8 | Used 210 Lit.Cap.Empty Solution M.S Barrel. |
| 9 | Cond.Sectional Mould |
| 10 | Used 18 Lit.Cap Empty Food Oil Tin. |
| 11 | Cond.Brake Linings and Clutch Linings |
| 12 | Cond.Engine,Main Axle,Rear Axle, Steering Box,Gear Box Spares and Other Metal Spares |
| 13 | Cond.Rubber Beeding,Hose, Cylinder Head Gasket,Front & Rear Engine Rubber Bed and Other Rubber items. |
| 14 | Cond.Alu.Brake Valve,other valve items and other Alu.items (As it is Condition) |
| 15 | Cond.Gear Wheel Items. |
| 16 | Cond.Bearing and Bearing Cones. |
| 17 | Cond.Alu.Pistons. |
| 18 | Cond.Spring Bed and Spring Shackle. |
| 19 | Cond.FRP Items,Head Light doom, Broken Plastic Cane and other Plastic Items. |
| 20 | Used Old M.S.Angle,M.S.flat,Channel, Chassis pieces,and other M.S items. |
| 21 | Cond/Old GP Sheet cuttings,Wire Mesh Tar belt layer G.P Sheet Cuttings, Broken Silencer Pipe,Head Light Doom,Pumper Pieces (As is where is Condition) |
| 22 | Cond.Cylinder Linner and other Cast Iron items. |
| 23 | Cond.Seat frames,pipes,Luggage Carrier and Ladders. |
| 24 | Cond.Turbo Charger. |
| 25 | Used Bolts,Nuts,Clutch Spring, other iron items. |
| 26 | Cond.Armature,Rotor,Soleneid Switch, Relay,Wiper Rotor,Condensor Fan, Starter and Other Electrical items (M.S & Copper) |
| 27 | Used \\"I\\" Bolt and \\"U\\" Clamps |
| 28 | Cond Alu.Sheet cuttings and Alu.Beedings Pieces |
| 29 | Used Alu.Beedings and Alu.Window frames. |
| 30 | Cond.New Chassis Driver Cabin, Battery Bracket and Other New Chassis M.S.Bracket |
| 31 | Cond.Radiator M.S.Bracket and M.S. Top Tank |
| 32 | Cond.Brake Shoe some with Lining |
| 33 | Cond.Wheel Booster (Front & Rear) |
| 34 | Used Old Alu.Sheet cuttings |
| 35 | Cond.Brake Drums. |
| 36 | Cond.Tie rod,Draglink rod and TATA Draglink rod some with ends |
| 37 | Cond.Prop.Shaft items.(Yoke,Teeth, Flange) |
| 38 | Cond.Air filter and Oil filters |
| 39 | Cond.Brass Bush,Brass Riverts, Tube Brass Mouth and Other Brass items |
| 40 | Cond.Copper enamal wire and other copper items |
| 41 | Cond.Flap and Flap Cutting Pieces |
| 42 | Cond.Tube Cutting pieces |
| 43 | Cond.Envelops. |
| 44 | Cond.Broken Spring Leaves some with Bush, clamps. |
| 45 | Rubber Dust(Buffing Dust) |
| 46 | Cond.Fan Clutch with Plastic leaf |
| 47 | Cond Clutch Disc. |
| 48 | Used 4Lit Cap.Empty Paint Tins |
| 49 | Cond.Wipper Motor Assy. |
| 50 | Cond.LMV Wheel Disc |
| 51 | Cond.Hydralic Jack-35 &Screw Jack-28 |
| 52 | Cond.Fire extinguisher |
| 53 | Used 20 Lit.cap.Empty Paint Tin. |
| 54 | Cond Air Tank. |
| 55 | Cond.LMV Radiator (Copper Core) |
| 56 | Cond.Radiator(Alu.Core) |
| 57 | Cond.Radiator Inter Cooler (Alu.) |
| 58 | Cond.Wheel Disc with Rings. |
| 59 | Cond.Hat Rack(G.P.Sheet) |
| 60 | Cond.Hat Rack(Wood) |
| 61 | Cond.Prop.Shaft (front & Rear) |
| 62 | Cond.Water Separator M.S.Body (2500Nos) |
| 63 | Cond.Shapping and Pedastal Drilling Machine |
| 64 | Cond.Empty Diesel Tank Assy. (165 Lit.Cap) |
| 65 | Cond.Empty Diesel Tank Assy. (210 Lit Cap.) |
| 66 | Used 18 Lit.Cap Empty Food Oil Tin. |
| 67 | Used 210 Lit.Cap Empty PlasticBarrel |
| 68 | Used 210 Lit.Cap Empty Oil MS.Barrel |
| 69 | Used 182 Kg.Cap.Empty Grease Barrel |
| 70 | Cond.Broken Barrel(M.S) |
| 71 | Cond.Crown Drive head Spares |
| 72 | Cond.12V 21P Plastic Battery. |
| 73 | Cond.12V 25P Plastic Battery. |
| 74 | Used Oil 210 Lit.Cap.with Plastic Barrel. |
| 75 | Used Oil 210 Lit.Cap.with M.S Barrel |
| 76 | Cond.Unsize Tyres LMV Tyres - 8, Two Wheeler Tyre - 3 |
| 77 | Cond.10.00x20 RB Tyre |
| 78 | Cond.11.00x22.5 Tubeless Tyre |
| 79 | Cond.Tube With Mouth |
| 80 | Cond.Tube Without Mouth |
| 81 | Cond.LMV Tube |
| 82 | Cond.Curing Bag. |
| 83 | Cond.Ceiling Fan-22,Exhaust Fan-3 Pedestal fan-1,Wall Mount Fan-6, 6mm Drilling M/C-6,10mm-4,3/4 - 3 Welding M/C 7KVA-2,Sander M/C-8, Motor 5HP-3,3HP-3,1HP-1,LMV fan-17 Chop Saw M/C-2,Main Switch-3,Table Fan small-4,Hand Grinding M/C-5 Submersible motor Assy-1,DOL Starter |
| 84 | Cond.Passenger Door |
| 85 | Cond.Hydralic Tralley Jack |
| 86 | Cond.Wet Grinder with Motor |
| 87 | Cond.Canteen Vessels(Alu,Silver, Brass & Iron) |
| 88 | Bus Body Shell Removal From Veh.No. TN33N2887 |
| 89 | Bus Body Shell Removal From Veh.No. TN33N2891 |
| 90 | Bus Body Shell Removal From Veh.No. TN33N3202 |
| 91 | Bus Body Shell Removal From Veh.No. TN33N3205 |
| 92 | Bus Body Shell Removal From Veh.No. TN33N3218 |
| 93 | Bus Body Shell Removal From Veh.No. TN33N3220 |
| 94 | Bus Body Shell Removal From Veh.No. TN33N3345 |
| 95 | Bus Body Shell Removal From Veh.No. TN39N0213 |
| 96 | Bus Body Shell Removal From Veh.No. TN39N0216 |
| 97 | Bus Body Shell Removal From Veh.No. TN39N0217 |
| 98 | Bus Body Shell Removal From Veh.No. TN39N0219 Please Enable Macros to View BoQ information |