|
| 1 | Site Cleaning including cutting of bushes and uprooting of stumps etc. all complete as directed by the Engineer-in-charge. |
| 2 | Earth work in excavation in all kinds of soil within the initial lead and lift including dressing and levelling the bed and depositing the excavated materials away from the work site etc. all complete as directed by the Engineer-in-charge. |
| 3 | Filling in foundation and plinth with excavated materials (All kinds soil) |
| 4 | Earth work in excavation of foundation in all kinds of soil within the initial lead and lift including dressing and levelling the bed and depositing the excavated materials away from the work site etc. all complete as directed by the Engineer-in-charge. |
| 5 | Earth work in excavation of foundation in all kinds of soil 1.50mtr to 7.50mtr depth within the initial lead and lift including dressing and levelling the bed and depositing the excavated materials away from the work site etc. all complete as directed by the Engineer-in-charge. |
| 6 | Filling foundation and plinth with Sand well watered and rammed including cost,conveyance and royality of sand etc complete. |
| 7 | Supplying all labour,materials,T&P for Cement Concrete (1:3:6) in foundation using 4 cm size hard granite Crusher Broken metal including cost of materials,royalty & conveyance charges with watering,curing all complete as per direction of Engineer-in-charge. |
| 8 | Providing & laying of 60mm thick factory made cement concrete interlocking Paver block of M30 grade and approved make variety colour and size made by Block making machin with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mmthick compacted bed of coarse sand ,filling the joints with fine sand etc.all compelte including cost,conveyance,royalty,taxes of all materials,labour,T & P etc.Complete as per direction of EIC |
| 9 | Providing and laying at or near ground level factory made Kerb stone of M-30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer in-charge). |
| 10 | Supplying all labour,materials,T&P for Cement Concrete M-20 for reinforced cement concrete works in using 12mm to 20 mm size hard granite Crusher Broken chips including cost of materials,royalty & conveyance charges with watering,curing all complete as per direction of Engineer-in-charge.Foundation RCC Base |
| 11 | Plinth Band |
| 12 | Lintel |
| 13 | Chajja |
| 14 | Wall Beam |
| 15 | Column |
| 16 | Roof Slab |
| 17 | Straightening, cutting, bending and binding, welding and jointing (if necessary ) coiled/ bent up MS Rods /Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 gauge binding wire required for R.C.C work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wire will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S rods or Tor steel linear measurements of rod for finished item of works. 5% wastage and lap length are included in the finished rate). |
| 18 | Supplying all labour,materials & T&P for Brick masonary with Fly Ash bricks in Foundation & Plinth having C.S not less than 35 kg/Cm2 in Cement Mortar (1:4) including watering and curing etc complete as per direction of Engineer-in-charge. |
| 19 | First class Fly Ash brick work in cement mortar (1:4) in Super Structure with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 20 | Providing 16mm thick C.P.(1:6) on Plaster surface including watering curring etc. Complete. |
| 21 | Providing 12mm thick C.P.(1:6) on Plaster surface including watering curring etc. Complete. |
| 22 | 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment |
| 23 | Supplying all materials, labour,T&P and 12mm thick C.P(1:4) over brick work including cement punning well curing cost of conveyance & royality taxes etc complete as per specification and direction of the Engineer-In-Charge |
| 24 | Providing & laying cement concrete of prop (1:2:4) in foundation bed and floors using 12mm nominal size down graded, screened, washed hard black crusher broken granite Chips of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer in charge. |
| 25 | Supplying, fitting and fixing vetrifed tile in floors of size 300mm x 300mm of approved make confirming to IS 13755 laid on 25 mm thick cement mortar 1:4 and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge. |
| 26 | Fixing Polished Tiles(300x450)mm to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete |
| 27 | Finishing plastered surfaces of walls with Berger Synthetic putty (interior) & marking smooth to receive painting including all labour, materials,T&P, etc. complete. |
| 28 | Priming one coat with any approved wall primer including cost of all labour ,materials T&P with taxes ,transportation etc all complete |
| 29 | Wall painting 2 coats with Plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 30 | Wall painting 2 coats with Weather Coat of approved shade on new work to give an even shade in Ground Floor. |
| 31 | Providing, fitting, fixing of AI. Door with OEL anodized AI. Door section of 9202 as vertical member, 9201 as top member & 9200 as bottom and middle member & 12mm thick pre-laminated board fixed on door frame by means of tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, hire charges of drilling machine, labour charges, etc. complete. |
| 32 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154, 151-155, as windows frame section No. 151- 155, 151-153 and 151-167 as shutter framewith 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting includingcost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. Data for 1.49 sqm |
| 33 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. |
| 34 | Priming one coat with Red Oxide primmer including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1) |
| 35 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of Engineer-in-charge. (As per A.R. 93/3) |
| 36 | 25mm thick CC 1:2:2 with 6mm size CB chips for Grading concret over roof slab etc. complete. |
| 37 | Remove Excavated Materials from site by mehanical means with loading and unloading the same within 5km away from site. |
| 38 | Supplying and stacking & spading of good earth at site including royalty and carrage up to 5 KM (earth measured in stacks will be reduced by 20% for payment) 300mm th. |
| 39 | Supplying and stacking sludge at site including royalty and carrage up to 5 KM (sludge measured in stacks will be reduced by 8% for payment) |
| 40 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation, breaking clods and fine dressing the ground including all materials and labour complete as per direction of Engineer-In-Charge. |
| 41 | Provision of soft surfaces such as grass lawns in between the open spaces |
| 42 | Provision of plantation all around the campus with suitable tree guard where required.Fast Growing Ornamental species (Kadamba (anthocephalus cadamba), Krusnachuda (Delonixregia), Radhachuda (Peltoferrum ferrugenum) |
| 43 | Slow Growing Ornamental Species(i.e. Asoka (sarca asoka), Baula (mimussops elengii), Bottle brush (callistemin lanceolatum), Neem (azadirchta indica), Karanj (pangamea pinnata), Debdaru (polyalthia longifolia), Aonla (embelica officinalis), Sunari (cassia fistula) & Kanchan (bauhinia variegate) |
| 44 | Shurb Species(Local Species)(i.e. Mandar (hibiscus rosasinesis), Tagar (tabarnae montana coronaria) , Kaniar (thevetia spp), Karabira (nerium oleander) |
| 45 | -Creepers/ Climbers/ Ground covers Please Enable Macros to View BoQ information |
