|
| 1 | DSR item No.8.13.11LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 1 of the DNIT). |
| 2 | DSR item No.8.16.4LED Flood Light, powder coated pressure die cast aluminum (System lumen efficacy ≥120 and <135 lm/Watt)Supplying, installation, Testing & Commissioning of Flood Light, (As per Complete Item No. 2 of the DNIT). |
| 3 | 150 Watt |
| 4 | DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 5 | Triple pole and neutral |
| 6 | DSR Item No.5.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. |
| 7 | DSR item No.5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 8 | Supply & erection of sheet metal distribution board of suitable size of required number of ways for mounting Miniature Circuit Breaker/ Isolators including connection & bonding to the existing earth etc. as required to the entire satisfaction of EIC. |
| 9 | Sheet metal SP&N Distribution board (dust protected) provided with din bar suitable for incorporating MCB’s/Isolator 3 way / 4 way |
| 10 | Supply and laying of XLPE insulated PVC sheathed Aluminium conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of M.S. clamp of suitable thickness. (As per Complete Item No. 8 of the DNIT). |
| 11 | Size 16 Sq.mm 4 Core XLPE Al. Arm. Cond. Cable |
| 12 | Size 10 Sq.mm 4 Core XLPE Al. Arm. Cond. Cable |
| 13 | S/E of 9 Mtr. long Hot dipped Galvanized pole of octagonal cross-section continuously tapered made out from high tensile steel of minimum thickness 3mm complete with the base plate of minimum size 260mm x260mm x16mm alongwith, (As per Complete Item No. 9 of the DNIT). |
| 14 | FOUNDATION FOR 9 MTR. LONG OCTAGONAL POLE:DSR ITEM NO. 2.8.1 (CIVIL WORK)Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), (As per Complete Item No. 10 of the DNIT). |
| 15 | DSR ITEM NO. 4.1.11 (CIVIL WORK)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level :1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size)(0.7m x 0.7m x 0.10m = 0.049 cum.) (3 no. x 0.049 = 0.147 cum) (As per Complete Item No. 11of the DNIT). |
| 16 | DSR ITEM NO. 5.22.6 (CIVIL WORK)Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars, (As per Complete Item No. 12 of the DNIT). |
| 17 | DSR ITEM NO. 5.2 (CIVIL WORK)Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, (As per Complete Item No. 13 of the DNIT). |
| 18 | DSR ITEM NO. 5.9.1 (CIVIL WORK)Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns, etc. for mass concrete.Size 0.5 x 0.5 x 1.55 = (0.5 x 1.55) x 4 = 3.1 Sq. Mtr.3.1 x 3 = 9.3 Sq. Mtr. (As per Complete Item No. 14 of the DNIT). |
| 19 | G.I. PIPE BRACKET ROUND SHAPE SUITABLE FOR 4 NOS. FLOOD LIGHT FITTINGSSupply, Fabrication and erection of GI pipe (medium class) bracket with 4’’ dia GI pipe 45 cm long canopy for mounting the existing LED Flood light fitting with the following specifications. (As per Complete Item No. 15 of the DNIT). |
| 20 | DSR Item No. 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 21 | 3 x 2.5 sq. mm Please Enable Macros to View BoQ information |
