|
| 1 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer in-charge i. 32 amps |
| 2 | ii. 63 amps |
| 3 | iii. 100 amps |
| 4 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable forsubmersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. i. 25 HP/18.5 kw Relay range within 13-21 + 10% |
| 5 | ii. 35 HP/26 kw Relay range within 20-32 + 10% |
| 6 | iii. 50 HP/37 kw Relay range within 28-42 + 10% |
| 7 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge. |
| 8 | Providing and fitting fixing of moving iron type, Range 0- 100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge |
| 9 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-incharge. |
| 10 | Providing and fitting fixing of spare kits without coil of L&T/Simens/ Cutler Hammer make A) for ML-2.0/ML 3.0 type cat No SS90544 |
| 11 | Providing and fitting fixing of Bimetal O/L relay type ML of L & T make. A) for ML-2.0/ML 3.0 relay range 28- 42 type Cat No SS91859 |
| 12 | Providing and fitting fixing Thermal timer GT-200 for 360 V, 50 Hz, a) For ML 2.0/ML 3.0 type |
| 13 | Providing and fitting fixing of pose power conductor type ML (L&T made) std. coil voltage - 220/240/ 360/415/525 V, 50 Hz, 10 Sec range-Cat. - No.-SS90701 a) For ML 2.0/ML 3.0 type |
| 14 | Poviding and fitting fixing with PVC insulated single core multistrand copper cable conforming to IS: 694 inter connection with all electrical equipments of the panel boards as per specification and direction of Engineer-in-charge. i) 10 sqmm |
| 15 | (ii) 16 sqmm |
| 16 | (iii) 25 sqmm |
| 17 | Providing and fitting fixing of Moulded Case Circuit Breaker(MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge.i. 32-40 Amps |
| 18 | ii. 50-63 Amps |
| 19 | Providing and fitting fixing of thimble 35 mm complete as per direction of the Engineer-in-charge |
| 20 | Providing and fitting fixing of non-return valve of approved quality as per of CPWD specification and direction of the Engineer-in-charge. i) 80 mm dia nominal bore |
| 21 | ii) 100 mm dia |
| 22 | Supplying & fitting fixing of 3HP Sub-merssible panel starter relay range (13-22 Amps) |
| 23 | Providing and fitting fixing Single phasing preventor +selectable under voltage +selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% L & T /BCH/HAVELS/ Siemens etc. make complete as per specification and direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
