Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of the excavation not exceeding 1500mm. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation. |
| 3 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. |
| 4 | Brick work with 1st class bricks in cement mortar (1:6). (b) In superstructure, ground floor. |
| 5 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 6 | Brick work with 1st class bricks in cement mortar (1:4). (a) In1st floor, |
| 7 | 2nd floor |
| 8 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. upto 150 mm. thick. |
| 9 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. In ground floor including roof. |
| 10 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m. Tor steel / Mild Steel. JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL. |
| 11 | For 1 st floor |
| 12 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 13 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturationwith water, ramming complete including the cost of supply of sand. (payment to bemade onmeasurement of finished quantity) |
| 14 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 15 | R.C. shelves (1:1.5:3) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8% main and 0.2% distribution bars), shuttering etc. and 10 mm. thick cement plaster (1:4) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages as necessary complete. 50 mm. Thick panels. In ground floor.JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL |
| 16 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 17 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 18 | Repairing crack in wall by cement grouting (1 : 2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1 : 2) and finishing off to match with adjacent surface. (Cement-69 Kg/100 m) |
| 19 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge. |
| 20 | Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department] |
| 21 | Removing corroded worn out portion of reinforcement (when the area of bar is damaged by more than 25%) by cutting and replacing the same by a new plain round bar of requisite diameter by binding with required lap / welding with old bar, including cost of reinforcement, complete in all respect including removing unserviceable materials from site as per direction of the Engineer - in - charge. Note : Payment on weight (Kg.) of new reinforcement. |
| 22 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. (Ground floor).[Excluding cost of chipping over concrete surface]. 20 mm thick plaster With 1:6 cement mortar. In ground floor. |
| 23 | In 1st Floor |
| 24 | In 2nd Floor |
| 25 | 15 mm thick plaster With 1:6 cement mortar. In ground floor. |
| 26 | In 1st Floor |
| 27 | 2nd floor |
| 28 | 10 mm thick plaster With 1:4 cement mortar. In ground floor. |
| 29 | In 1st Floor |
| 30 | 2nd floor |
| 31 | Dismantling carefully terraced floor only (including floor finish if any) or lime terracing in ground floor roof and removing rubbish as directed within a lead of 75 m. In Ground Floor including roof. |
| 32 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Floor. With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Area of each tile upto 0.09 Sq.m. Coloured decorative |
| 33 | Wall. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg / Sq.m. Area of each tile upto 0.09 Sq.m Coloured decorative. |
| 34 | Polishing only of old marble or terrazo work with oxalic acid powder using 33 gms/ sq.m. by manual labour / machine where necessary. |
| 35 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick). |
| 36 | Synthetic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats |
| 37 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor). One Coat. Water based interior grade Acrylic Primer |
| 38 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat |
| 39 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer). (Two coats) Standard Quality |
| 40 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat). Premium 100% Acrylic Emulsion. |
| 41 | Washing and cleaning old painted surface and oiling with linseed oil. |
| 42 | Scraping and removing greasy soot from walls or ceiling of kitchen or similar smoke affected rooms and preparing the surface. |
| 43 | Supplying, fitting and fixing of false ceiling framework with powder coated exposed G.I. grid suspension system (EGrid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins/ soffit all complete as per the drawing & directions of Engineer-in-charge. |
| 44 | Supplying ,fitting & fixing Ecofriendly, Moisture Resistant and Incombustable Gypsum plaster board/tiles (Density > 700Kg per Cu.m) conforming to IS 2095- Part 1, 2011 of size 595mm X595mm of approved design and brand placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. False ceiling with (ii) 12.5mm thick Square edged Gypsum Plaster Board / tiles |
| 45 | M.F.suspended ceiling made with 12.5mm thick Gypsum plaster board including G.I. perimeter channel of 0.55mm flush (having two flanges 20mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45mmx15mm placed at 750mmc/c with G.I. ceiling angle of size 25mm x 10mm x 0.55mmthick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55mm thick of size 51.50 mm x 26 mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300mm c/c 12.5mm thick Gypsum plastered board are to be fixed under ceiling sectionas above by machine screws.The boards are to be joined and finished with jointing compound, paper tape and application of to pcoat etc. asper thedirection of Engineer-in-charge. (The rate includesof cost of allmaterials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete)In ground floor |
| 46 | Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC value > 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-incharge. a) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U- 1520). |
| 47 | Supplying, fitting & fixing OW Acoustic Board (mineral Fibre Acoustic Ceiling Tiles) of approved patern and size595mm X595mm with NRC value > 0.65 should be placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. False ceiling with (i) 15mm thick OW Acoustic Board/Tiles. |
| 48 | Supplying fitting & fixing concealed False ceiling Framework with G.I. Section (perimeter channels having one flange of 20 mm. and another flange of 30 mm. with thickness of 0.55 mm. and web of length 27 mm., along the perimeter of the ceiling, screws fixed to the wall with help of nylon sleeves or PVC dash fastners @ 610 mm c/c. then suspend G.I. intermidiate 'C' section with web 90 mm. and flanges of 15 mm. each from soffit @ 1200 mm c/c with ceiling angle of size 25 mm. X 10 mm. X 0.55 mm. fixed to soffit G.I. Cleat and Steel expansion fasteners. Ceiling section of 0.55 mm. thickness having web of 51.5 mm. and two flanges of 26 mm. each with lips of 10.55 mm., are then fixed on to the intermediate channel with the help of connecting clips in the direction perpendicular to the intermidiate channel @ 610 mm c/c) with fully threaded fiber cement screws @ 300 mm c/c. all complete as per the drawing and direction of Engineer-in-Charge. Section specification :- Perimeter Channel :- 30 mm X 20 mm X 27 mm, thickness 0.55 mm (min), Intermidiate Channel :- 15 mm X 90 mm, thickness 0.90 mm (min), Ceiling Section :- 51.5 mm X 26 mm X 10.55 mm, thickness 0.55 mm (min), Ceiling Angle :- 25 mm X 10 mm, thickness 0.55 mm (min). |
| 49 | Partition of teak veneer [1 mm] as per design fitted and fixed complete (excluding the supporting frame work & necessary teak wood battens): In ground floor. 4mm thick commercial quality. |
| 50 | Provide fit and fix wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Local. |
| 51 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately). Upto area 2.5 Sq.m. |
| 52 | Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only). |
| 53 | Styles and rails of wooden shutters fitted and fixed complete. (Payment to be made on area of new work only). In Ground Floor: For 25mm. Thick shutter.Sishu, Gamar, Badam,Bhola, Mogra, Hallak. |
| 54 | For 35mm. Thick shutter.Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 55 | Panel (made of single plank) of door and window shutters to design as directed: In Ground Floor(Payment to be made on area of exposed new work). (In case of non-supply of single plank penal rate of reduction to a maximum of 30% will be made). 19 mm thick panel of 30 cm to 45 cm width. Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 56 | Dismantling carefully wood work in posts, postplates, rafters, partition etc., sorting and stacking serviciable materials at site and removing rubbish as directed. |
| 57 | Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. Heavy type (I.S.I. size 3) |
| 58 | Medium (I.S.I. size 2). |
| 59 | Repairs to automatic door closer including replacement of damaged main spring, oiling and adjusting as necessary including taking out and refitting the same. |
| 60 | Renewing plated hook of Venetian Valve with screws. |
| 61 | Renewing 12mm. Thick louver of fixed lauvered shutter to match with the existing one including necessary railing pieces: Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. |
| 62 | Renewing iron mortice lock (local best approved quality) 6 lever with handle, connected rods and keys consisting a complete set: With chromium plated handle. |
| 63 | Renewing mortice lock handle with connected rod: With chromium plated. |
| 64 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: With continuous plate base (Hexagonal/ Round rod) 100 mm grip x 12 mm dia rod. |
| 65 | Wood work in beams and burgahs fitted and fixed in position complete. (Cost for repairing of Damage to be paid separately). Local Sal. In ground floor. |
| 66 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately). 40 mm X 6 mm, 200mm Length. |
| 67 | Iron Gravity Hinge (block patent best quality) fitted and fixed complete. |
| 68 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100mm. X 58mm. X 1.90mm. |
| 69 | 50mm. X 37mm. X 1.50mm. |
| 70 | Provide fix & fix Iron socket bolt of approved quality fitted and fixed complete. 100mm long x 10mm dia bolt. |
| 71 | 150mm long x 10mm dia bolt. |
| 72 | 225mm long x 10mm dia bolt. |
| 73 | Provide fitt. & fix 10mm dia x 300mm long. Iron catch hook of approved quality fitted and fixed to shutter and chowkat. |
| 74 | Provide fitt. & fix 50mm. Iron door ring of approved quality fitted and fixed with nut and washer complete |
| 75 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: 150 mm long x 10mm dia. bolt. |
| 76 | 225 mm long x 10mm dia. bolt. |
| 77 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 250mm long. |
| 78 | Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. |
| 79 | Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface : (b) Two coats |
| 80 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On timber or plastered surface : With super gloss (hi-gloss) -Two coats (white in shade) |
| 81 | Two coats (with any shade except white) |
| 82 | On steel or other metal surface :With super gloss (hi-gloss) -Two coats (white in shade) |
| 83 | Two coats (with any shade except white) |
| 84 | Provide and apply French polishing to wood work including preparing surface (ordinary gloss) On old French polished surface including complete removal of the old polish. |
| 85 | On new wood work. |
| 86 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) |
| 87 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. ( Item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) |
| 88 | M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm). (To be used for repair works only) |
| 89 | Taking out carefully G.C.I. or C.I. or asbestossheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed.(Payment to be made on measurement of portion of roof or wall removed) |
| 90 | Fitting and fixing old pieces of asbestos, G.C.I. or C.I. sheets or plain sheets including closing old holes with washers and sheet-bolts and nuts, etc. and including fixing the same to supporting frame with necessary hook-bolts, washers, putty etc. (excluding cost of sheets). (Payment to be made on area of finished work.) With all new fittings including the cost thereof. In roof. |
| 91 | Stopping roof leakages in C.I. or G.C.I. or asbestos roofing. With limpet and bitumen washer and putty . |
| 92 | Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design, bolts, nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping). 225 mm. wide gutter. |
| 93 | Provide brass door stopper.(Brass). |
| 94 | Easing door and windows. |
| 95 | Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed. |
| 96 | Partition of commercial ply as per design fitted and fixed complete (excluding the supporting framework but including necessary teak wood battens of size 40 mmx 25 mm): In Ground Floor. 4mm thick. |
| 97 | 6mm thick. |
| 98 | 12mm thick. |
| 99 | Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. Thickness of laminate 1 mm. |
| 100 | Painting block letters or digits in Black Japan or any approved paint as per direction. Size 2 cm. to 2.5 cm. |
| 101 | Size above 2.5 cm. and upto 4 cm. |
| 102 | Size above 5 cm. and upto 7.5 cm. |
| 103 | Size above 7.5 cm. and upto 10 cm. |
| 104 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 105 | Cutting chase upto 125 x 150 mm. and subsequent mending of damages. In brick wall [Cement-3.6 Kg/Mtr] |
| 106 | Cutting holes and subsequent mending gooddamages. Diameter exceeding 150 mm. but notexceeding 300 mm. In brick work [Cement-6.0 Kg/Mtr] |
| 107 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 6mm thick clear glass. |
| 108 | 8mm thick clear glass. |
| 109 | Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately). Small plant of girth of exposed stem upto 75 mm. lift upto 6 mtr. |
| 110 | Medium size plant of girth of exposed stem above 75 mm. but not exceeding 150 mm. lift upto 6 mtr. |
| 111 | Large plant of girth of exposed stem above 150 mm. but not exceeding 225 mm. lift upto 6 mtr. |
| 112 | Providing and fixing of false ceiling at all height including proving and fixing of frame work made of special sections, power pressed from M.S. Sheet and galvanized with zinc coating of 150 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre , to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre with 25 mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including joining and finishing to a flush finish of tapered and square edges of the board with recommended joining compound, joining tapes, finishing with joining compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacture's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer-in-Charge but excluding the cost of painting with : (ISI Mark on Board) |
| 113 | Renewing spring of rolling shutter as per existing size and shape including fitting fixing complete. |
| 114 | Oiling and greasing of rolling shutter and repair to in side lock. |
| 115 | Renewing one point steel (oxidised) handle of steel door and windows as directed including painting complete. |
| 116 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film. Door frame. (Top & sides). |
| 117 | Movable Door Shutter : Top rail. |
| 118 | Bottom rail. |
| 119 | Lock rail. |
| 120 | Door vertical. |
| 121 | 3-track sliding window (II) Coloured. Bottom frame |
| 122 | Top and Side Frame |
| 123 | Shutter for all track sliding window. Bottom and Top member |
| 124 | Style side member |
| 125 | Inter lock member |
| 126 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:- Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. (10% rate reduction has to be made for swing doors or partitions where floor sping is not used. 10% hancement of rate is to be made where door frame of extruded aluminium sections has to be fitted and fixed to masonry wall. 5% rate enhencement may be allowed for double leaf swing door. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration.Payment for door frame sections are to be paid seperately). |
| 127 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made). 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 128 | Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately. In ground floor. 35mm thick shutters. Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 129 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm. wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. 32 mm thick shutters (single leaf). |
| 130 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge |
| 131 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. (This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly. 3.90 metre height |
| 132 | Extra for additional 3.6 height or part thereof |
| 133 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 8 to 8.5 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr] With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. Light Colour |
| 134 | Providing, making and fixing acrylic sheet (upto 3mm thick) name/designation plate of approved size, best make and design including necessary lettering, adhesive, hooks etc for fixing/hanging as per direction of EIC. All complete. |
| 135 | Providing, making and fixing name/designation steel plate (upto 1.5mm thick) of approved size, best make and design including necessary lettering, adhesive, hooks etc for fixing/hanging as per direction of EIC. All complete. |
| 136 | Ordinary Cement Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur variety Concrete (6mm) |
| 137 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety |
| 138 | Dismantling of all assorted item that includes Wall partition/False Celling made of Wood, Ply Board, Masonite Board, Alluminium Partition, Door/Wondow frames, Glass etc. of any thickness with frame shifting and stacking the materials as decided by SMP Kolkata within a lead of 75 Mtr. all complete. |
| 139 | Shifting of e-waste and other miscellaneous materials from SMPK Head Office (Main and Annexe Building) to any destination as decided and directed by SMPK Authority by hiring TATA ACE Vehicle along with unskilled labour for loading/ unloading for disposing the materials within a lead of 5 KM all complete. |
| 140 | Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene(APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.). Membrane Property: Softening Point > 150 deg C, ColdFlexibility < -6 deg C, Tensile Strength, N/cm : 600(longitudinal), 450 (transverse), Tearing Strength, N:300 (longitudinal), 200 (transverse) |
| 141 | Preparation of drainage spout on roof for bituminous waterproofing treatment after required grading and shapingof the under bed with Cement Concrete (1:2:4) orCementMortar (1:4) as directed, Chamfering and moulding theparapet wall to form a bell mouth entry, if required andproviding full course treatment with bituminous felt tofacilitate quick and smooth drainage of watwr into the down pipes complete including cost of all materials and labouraccording to satisfaction of the Engineer - in -Charge.(This item shall be done for reparing works only and shallnot be used when original/renewal of tarfelting work isproposed to be undertaken) |
| 142 | Repairs to roof cracks with cement and sand mortar (1:4)including cutting grooves and cleaning cracks and groutingthe cracks with neat cement before repairs. (Cement 0.63Kg/Mtr. ) |
| 143 | Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS15622:2006(GroupBIa) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤0.08%]infloor,skirting etc.using polymerised adhesive of6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer-2mm as directed and removal of wax coating of top surface of tile swith warm water and polishing the tilesusingsoft and dry cloth up to mirror finish complete including the cost of materials,Iabour and all other incidental charges complete asper direction of Engineerin-Charge.(Note:This work should not be executed with out specific permission of Superintending Engineer) ln Ground FIoor:(size not Iess than 600 mm X 600 mmX 9.5 mm thick) |
| 144 | Labour for taking out rolling shutter (only shutter portion) dismantling by parts for repair or (replacement ofdamaged parts only), rehanging and refitting the same in position after necessary repairs (excluding the cost ofsupply of new parts). |
| 145 | Renewing seam pipe for rolling shutter as per existing size and shape fitting, fixing complete. |
| 146 | Renewing side split pin for seam pipe forrolling shutter. |
| 147 | Oiling and greasing of rolling shutter and repair to in side lock. |
| 148 | Renewing profile of rolling shutter including fitting fixing complete as per existing size and shape. |
| 149 | Renewing spring of rolling shutter as per existing size and shape including fitting fixing complete. |
| 150 | Taking out existing partition/ceiling of particle board, masonite board, ply board, soft board etc. of any thicknessand refixing same in new position with necessary clamps making holes in walls, floor, roof and mending damages ifany.[concrete plaster will be paid separately] |
| 151 | Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality of reputed brand as per direction of Eingineer-in Charge fitted and fixed complete including all incidental charges. |
| 152 | Supply Heavy duty Hydraulic double action Floor Spring along with top pin /set of pivots conforming to IS 6315 or any approved makes as per direction of Engineer in charge |
| 153 | Providing and fixing in position FRAMELESS GLASS DOOR made with 12 mm thick clear ioughned glass of Saint Gobain / Pilkington / Modiguard make fixed to floor and sofiit of ceiling / false ceiling rigidly and ai the centres wnerever required in line and level with SS patch fitiings, floor spring of Dorma, Ozone or approved equivalent make. Finally the dooi'will be finished with S S door handle with locking arrangement of Ozone / Hettich make with all enabling wcrks ccmpleie as per drawing. Specification and direction of the Engineer tn charge. |
| 154 | Polymer Modified Morter (Brickwork)building up the Profile of masonary members upto 20 mm by using emulsified SBR latex conforming to ASTM C-10592013 Type-II,I cement (OPC as per IS 8112)-3 part graded cleaned river sand(zone I sand as per IS 3832016)+115-20% latex by wt. of cement)with 35 w/c ratio,and having 38% solid content,in 10 -15mm thick layers by applying bond coat between succesive/each layers including Levelling & Profiling complete.Proper curing shall be done for the repair work.Gunny bags may be used for effective curing.Polypropylene fibres(Recron or equivalent)shall be added to reduce shrinkage.Polypropylene fibres@ 1kg/cum shall be added to achieve homogeneity inPMM mix.70.2x70.2x70.2 mm cube shall be taken as representative sample to achieve 28 days compressive strength of 30 MPa at 28 days compressive strength of 30 MPa at 28 days of curing in water.The item rate includes the rate for bond coat to be applied between layers.Bond coat shall be prepared by mixing 60 ml of Latex in 100 gms of Cement. |
| 155 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erectionall complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such item with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. For structural members of specified sectionsweighing less than 22.5 Kg./m |
| 156 | For Structural Works in Roof Trusses etc. using joists, channels and angles of specifiedsection weighing less than 22.5 kg/ m |
| 157 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. ii) For other Structural works like galleries etc. |
| 158 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 ofapproved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]. 9mm |
| 159 | Supply of Fitting and Fixing of PVC White Vertical Blind.Made of Premium febrics in Width 5\\" Or 4 \\".minimum overlapping of 3/4 in fabric.top aluminium anodized rail of 1.4 mm thickness.2 inch wide channel with front lamination of same fabric .runners having stainless steel hooks with built-in shock spring and self alingning slip clutch.End control box composed of doubl;e gear system .Stainless steel spacers.bottom weight fully plastic covered linked with plastic based chain etc. incuding all complete. |
| 160 | Provide and arrange for Spray Painting on exsisting old steel Almirahs with best quality Synthetic enamel(two coats )of any shade on a coat of steel primer after throughly removing old paint loose scales,blisters,rust etc,making the Surface even/Smooth by application of putty ,with material ,labour,tools plants and equipment,profit,overhead all complete.The work shall include all vertical and horizontal surfaces including external boottom and back surfaces,Supporting legs. Size 6 feet (H) X 3 feet (B) X 1 feet 6 inches(D) to 6 feet 6 inches(H) X 4 feet (B) X 1 feet 6 inches |
| 161 | Size 3 feet 7 inches (H) X 2 feet 6 inches(B) X 1 feet 6 inches(D) to 4 feet 6 inches (H) x 3 feet (B) X 1 feet 6 inches (D) |
| 162 | Spray Painting two coats with best Quality synthetic enamel paint & priming one coat on steel Rack surface with synthetic oil bound primer of approved quality including steel putting smoothening surface by sand papering etc all complete including of profit and overhead charges. Size 6 feet (H) X 3 feet (B) X 1 Feet 3 inch (D) upto 6 feet 5 inch(H) X 4 feet (B) X 1 Feet 5 inch (D) |
| 163 | Size 3 Feet 5 inch (H) X 2 feet 6 inch (B) X 1 Feet 3 inch (D)upto 4 feet 5 inch (H) X 3 feet (B) X 1 Feet 6 inch (D) |
| 164 | Spray Painting two coats with best Quality synthetic enamel paint & priming one coat on Wooden Almirah surface with synthetic oil bound primer of approved quality including wooden putting smoothening surface by sand papering etc all complete including of profit and overhead charges. Size 6 feet (H) X 3 feet (B) X 1 feet 3 inch(D) upto 6 feet 5 inch (H) X 4 feet (B) X 1 Feet 6 Inch (D) |
| 165 | Providing and fixing stainless steel (grade-304)railing made of hollow tubes,channels,plates etc including welding ,griding,buffing,polishing and making curvature(whereever required) and fitting the same with necessary stainless steelnuts and bolts complete.I/C fixing the railing with necessary acessories & stainless dash fasteners,Stainless steel bolts etc,of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts,faseners etc. |
| 166 | Providing & Supplying unskilled labour for misscellaneous cleaning works.Normal time of work 9 hours incuding one hour recess. |
| 167 | Providing & Supplying Semi-skilled labour for misscellaneous cleaning works.Normal time of work 9 hours incuding one hour recess. |
| 168 | Providing & Supplying Skilled labour for miscellaneous cleaning works.Normal time of work 9 hours incuding one hour recess. |
| 169 | Providing Anti-termite treatment to the soil under floor and walls at various building and structures of SMPK using IMIDACLOPRID 30.50 Sc as per IS 6313-3: Code of practrise for anti termite measures in building (Part-3 treatment for exisisting building with 5 years warranty from the date of completion of the work.The entire work is to be carried out as per specification .(Mode of measurement would be on floor area only through the actual work may be done on walls,ceiling etc.) |
| 170 | Spot application for insecticides using oil baed spray for pest(for bags,cockroaches ,silver fish ,spider,termite ,mosquitoes) to walls and ceiling etc.with chemical emulsion by admixing BIFENTHRIN with solvent by weight including spraying the emulsified [email protected] litres per sq.m. by a hand operated pressure pump on wall surfaces,ceiling,wood work,electrical lines etc.(Rate is per Sq.m. of the floor area while actual work may be done walls ceiling ,rack,partition and furniture etc.) |
| 171 | Supplying fitting and fixing Italian Marble slab/Tile in skirting (upto 300mmht) over 15mm(avg) thick base of Cement mortar(1:2) laid with white cement slurry @4.4kg/Sq.mat back side of marble and jointed with white cement slurry@ 2.2kg/Sq.m with necessary pigments including grinding and Granite Polishing. [White cement and Pigment to be supplied by the Agency][This work should not be executed with out specific permission of Superintending Engineer] a) Light Beige Colour (such as Perlato, Bottichino, Crema). 20 mm thick Italian Marble stone slab |
| 172 | Supplying,fitting & fixing granite slab15mmto18mm thick in floor, lobby, stair, landingand treads etc. over 20 mm (avg) thick base of cement morter (1:2 )laid with white cement [email protected] Kgper Square meter before placingof granite and jointed with white cement [email protected] per square meter with necessary pigments and complete as per direction of Engineer-in-charge includingcost of allmaterials, labours,curing and roughening of concrete surface complete. In ground floor. Area of each Granite slab above 1.00 Square meter. |
| 173 | In 1st Floor |
| 174 | In 2nd Floor |
| 175 | Hire chargees of Tata ACE including driver,fuel and other tools & tackles but excluding the labour cost of loading and unloading for shifting job at various place os SMP kolkata.for the Period of 8hr.As directed by EIC. |
| 176 | Cleaning and disinfecting upto 2000 litre Water Tank including masonryreservoir. |
| 177 | Cleaning and disinfecting Above 2000 litre Water Tank including masonryreservoir. |
| 178 | Welding in M.S. structural work with gas or electric: Tack weld |
| 179 | Continuous weld. |
| 180 | Supply & Laying 2 mm thick Plastic felt sheet(P.B.M felt 2505 or equivalent brand over flat/slope roof including necessary lapping wherever necessary after out old tarfelt & cleaning the Surface throughly. |
| 181 | Cutting/Clening/removing jungles including uprooting/removing of rank vegetation,cutting grass,bush wood cutting/removing small tree saplings or branches of trees falling under the cutting area at different area of dock and removing spoil upto a distance of 50 m outside the periphery of the area cleared as per direction including all lead,lifts,cutting instruments,labour etc complete in all respect. |
| 182 | Repair to plaster of avg.thickness 10 mm inpatches of area 2.5 sqm and under,including cutting the patch in proper shape with polymer Modified morter with cement and sand morter(1:3) including Latex 20% by weight of the cement as directed in true ceiling using necessary material,tools,tackles,scaffolding/stagging in all complete. |
| 183 | Flower decoration with a mix of good quality seasonal and artificial flowers on special occasssions including medium size baskets/bunches/bouquets,at HO SMPK main/Annex Building Entrance areas,gates,lift,corrider at chairman,s floor,CRDC building,Hillary Institute and at prescribed locations as per direction of the EIC at short notice with proper arrangements without causing any disturbances to the normal functioning of the office work with adequate/safe barricading to segregate the working zone from public circulating area(as required) with necessary labours,tools,tackles etc.All complete. |
| 184 | Supplying and laying true to line and level Anti-Skid,Full Body,Homogeneous & Granular finish Vitrified Tiles conforming to IS: 15622-2006 &IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non-modular sizes for tiles with Skid resistance>0.5,Mohr's hardness>5.0, Staining resistance:Class1,WaterAbsorption:E<0.5%],MOR>35N/sq.mm in Internal area of building e.g.Toilet Block, Passage,Corridor,Accessible OpenTerrace etc.set in 20 mm sand cement mortar(1:4) and 2mm thick cement slurry at back side of tiles using cement @ 2.91Kg./Sqm or using Polymerised Adhesive (6mmthick) layer applied directly over finished artificial stone floor/ Mosaic etc with out any backing course) laid after application slurry using 1.75Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/epoxy grout materials of approved makeas directed and remova lof wax coating of top surface of tiles with warm water and polishing the tiles usings of Soft & dry cloth upto mirror finish complete including the cost of materials,labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge (White cement, synthetic adhesive and grout material to be supplied by the contractor). In Ground Floor : Sizes-300 mm x 300 mm x 10 mm with breaking strength>1200 N |
| 185 | In Ground Floor : Sizes-600 mm x 600 mm x 10 mm with breaking strength> 1500 N |
| 186 | Suppling, fitting and fixing single skin color coated trapezoidal profile for wall cladding, Roof shall be made of 0.45 mm BMT (Base Metal Thickness) (0.50 mm) TCT (Total coated thickness excluding paint), G550 (min 550 yield strength), of Zincalume metallic coating (IS15965) withhigh Solar Reflectance Index (SRI) value for better colling as per thermatech technology, 1000 - 1015 mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg. The steel sheet shall be fastened with 40 micron zinc coated or 25 micron zinc-tin alloy coated, hex head, self-drilling screw as per IS 3566-2002 Class 3 fastener. The base steel shall be coated with zinc-alluminium alloy Zincalume (AZ150) (i.e. 55% AI, 43.4% Zinc, 1.6% Si) minimum of 150 g/m2 coating total on both sides, pre-painted with colorbond ZRW (eterior roofing, walling) paint system of 35 micron Super Durable Polyester paint (SDP) with stable inorganic pigment with no lead contents confirming IS15965. The sheet shall be free from defects and have brand marking of the manufacturere giving product details on the back of the sheet at regular interval confirming genuinity of the material. In Roof:- With 0.5 mm thick sheet |
| 187 | Providing and fixing of factory made uPVC Sliding Door (White Colour) complete, (U value=1.9-1.3W/m2K, flame resistant, self extinguishing, lead free)comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash extruded profiles with wall thickness of 2.3mm (±0.2mm) duly reinforced with G.I. section 1.6mm (±0.2mm),made fromroll forming process of required length(shape & size according to uPVC profile)wherever required.Profile of frame &sash shall be mitred cut and fusion welded a tall corners, including drilling of holes for fixing hardware's and drainage of water etc.After placing 5mm Clear Annealed glass in the sash,appropriate dimension uPVC extruded glazing bead, uPVCextruded inter lock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zincalloy (white powder coated )handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keep sand stainless steel (SS304 grade) body with adjustable double nylon rollers(weight bearing capacity to be 120kg). Door frame will be fixed to the wall with 100mm long and 8 mm dia.fastener sand necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rodof required size, of approved quality complete in all respect as per approved drawing & direction of Engineer in-Charge. (Note:Profilemanufacturer&DoorManufacturermustbeone& same, Only manufacturer Waranty is aceptable) . 2 Track 2 Sash door frame of size 67 x 54mm & Sash of size 85 x 47 mm both having wall thickness of 2.3 ± 0.2 mm. |
| 188 | 3 Track 3 Sash door frame of size 122 x 54mm & Sash of size 85 x 47 mm both having wall thickness of 2.3 ± 0.2 mm |
| 189 | 3 Track with Mesh-2 Glass Sash+1 Mesh Sash (Each sash shall be half of width of door)Door frame of size122x54mm &Door Sash of size 85 x 47 mm & Mesh sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm |
| 190 | Supplying, fitting and fixing 8 mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than1200 mm X 190mm (with unilin /tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibre board (HDF)having density >940kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue-groove system (having locking strength not less than 1000 kg/m) over a 2mm th kunder laye polyurethene foam on polythene sheet 250 micron,over a smooth, flat,hard sub floor free from moisture(<8%),greas eetc.complete in all respect with requisite accessories like end profile, transition profile,reducer 'T' profile etc.wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting, End edge, T-moulding,Reducer)shall have to be added separately, wherever required.(Note: Thiswork shouldnot be executed with out specific permission of Superintending Engineer). ln Ground FIoor: Category: High Footfall ; Class23;Abrasion resistance:-AC4 Thk on Swelling:- < 15% ;Impact resistance:- IC 2 |
| 191 | Supplying Laminate Floor Accessories (Skirting, End edge,Tmoulding, Reducer ) to 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having0.2mmthk top abrasive layer over a decorative layer followed by a High-density fibre board (HDF) having density>840kg/m3 substrat ecore overa rasin saturated backing layer and installing through unilin ortongue-groove system (having locking strength not less than 1000kg/m) over a 2mm th kunder layer polyurethene foam on polythene sheet 250 micron,over a smooth, flat,hard sub floor free from moisture(<8%),grease etc.complete in all respect as per direction & satisfaction of Engineer in charge. Cost of labour charge for fitting & fixing of Laminate Floor Accessories only (Skirting,End edge, T-moulding,Reducer)shall have to be added separately,whereverrequired. (Note:This work should not be executed without specific permission of Superintending Engineer). ln Ground FIoor: Catagory: Normal/High Footfall |
| 192 | Cutting of branches of trees shrubs and trimming ofgrass and weedsi) Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location as pertechnical specification Clause 1914 for RuralRoads of MORD. |
| 193 | Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including sutting, loading,unloading to and from truck or cart by Mathor labour& removing the same to any distance. |
| 194 | Surface dressing of the ground in any kind of Soil including removing vegetation inequalities not exceeding 15cm depth and disposal of the rubbish within a lead upto 75 m as directed. |
| 195 | Supply including placement on hire basis for 24(twenty four)hours good quality VIP Iron Chair With cover of white colour cloth and sash of saffron /white/green/any other approved colour at site including transporting,loading and unloading etc at site(Payment will be made as per the actual number of chairs with cover and sash supplied) |
| 196 | Supplying fitting and fixing 600 mm (+/- 30 mm) diametre R.B.T(Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.) |
| 197 | Supplying, Fitting & Fixing 30mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size19mm x 19 mm for styles,to pand bottom rails,M.S.frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5mm th. heat moulded PVC“C”channel of size 30 mm th,70mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5mm th.95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rails shall be provided either side of the panel with 10mm (5mm x 2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail.Paneling of 5mm th. both side PVC sheet tobe fitted in theM.S. frame welded /sealed to the styles & rails with 7mm(5mm+2mm) th.x15mm wide PVC sheet be ading on inner side and joined together with solvent cement adhesive.An additional 5mm th. PVC strip of 20 mm which is to be stuck on the interior side of the“C”channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.In ground floor. |
| 198 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mm x 47 mm with a wall thickness of 5mm, made out of extruded 5mm Prelaminated PVC sheet miter cut at two corner sand joined with two nos of 1.5 mm long brackets of 15mm x1 5mm M.S. square tube. The two vertical door profiles are to be reinforced with19mm x 19mm M.S. Square tube of 19 gauge,weather seal to be provided through out the frame.The door frame shall be fixed with the wall using 65 / 100mm M.S. Screws through the frame by using P.V.C fasteners.Aminimum of 4Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc.completeasperManufacturer‟s specification and direction of Engineer-in-Charge. |
| 199 | Supplying,fitting & fixing of trap door at false ceiling level made with 19 mm & 12 mm plywood(make:Green Ply or equivalent)including laminate(1mm thick)pasting and side polishing to access for service maintenance and repairing work.All in ccomplete as per directed by EIC. |
| 200 | Supply of 3 mm thick approved good quality red colour Woolen carpet (Size-122'x4,) as per directed by EIC in all complete. |
| 201 | Supply including placement on hire basis for 24 (twenty four) hours season flower plant with tub as per approved by Engineer -in- charge including transporting loading and unloading etc .at site . |
| 202 | Supply including placement on hire basis for 24 (twenty four) hours good quality Jute Carpet at site including transporting loading and unloading etc .at site (Payment will be made as per the actual area of Jute carpet supplied). |
| 203 | Supply of sanitizer, soaps, odonils, sanitizer distemper,dustbin, various disinfactant materials, carbolic acid and other required misscellaneous materials etc. complete in all respect as per direction of Engineer (Payment will be done on the basis of purchase bills/ challans etc) |
| 204 | Supply of good quality foot mats for Old & Annex building at Chowringhee Guest House . Complete in all respect as per direction. |
| 205 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In Ground Floor . Two coats. |
| 206 | Renewing X.P.M. including taking out and refixing with old battens but with new screws etc. complete. 25mm x 75mm strand 3.25mm x 1.6mm. |
| 207 | Renewing X.P.M. including taking out and refixing with new battens made of local wood of size 50mm x 25mm and new screws etc. complete. 25mm x 75mm strand 3.25mm x 1.6mm. |
| 208 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrsThe final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 209 | Fitting and fixing old pieces of asbestos, G.C.I.or C.I.sheets or plain sheets including closing old holes with washers and sheet-bolts and nuts, etc. and including fixing the same to supporting frame with necessary hook-bolts,washers, putty etc. (excluding cost of sheets). (Payment tobemade on area of finished work.)With all new fittings including the cost thereof b(in wall) |
| 210 | Hire Charges of Mini Truck including driver, fuel and other tools & tackles but excluding the labour cost of loading and unloading for shifting job at various place of SMP, Kolkata. For the Period of 8 hr. As directed by EIC. |
| 211 | Fixing of bamboo posts by digging hole in all sorts of soil and subsequent thorough repacking the same with spoils including thecost of one coat of coal-tarring the embedded portion of the bamboo : Depth 600 mm. |
| 212 | Strong bamboo posts, posts plates, rafters, ties etc. fitted and fixed complete with coir rope or nails as directed. Embedded portion of posts shall also be paid for against this item. Cost of digging hole and repacking being paid for seperately.100 mm dia bamboo |
| 213 | Galvanised corrugated iron sheet work (excluding the supportingframework)fittedandfixedwith10mm.diaJor Lhook-bolts, limpet and bitumen washers and putty complete with 150mm .end lap and onecorrugatio nminimum side lap. (Payment tobe made on area of finished work)(GCI sheet to be supplied by contractor)In wallWith 0.63 mm thick sheet Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
