|
| 1 | Repairing and maintenance of submersible motor suitable for submersible pump set by complete dismantling in/c providing & fitting fixing of PVC (IS: 8783-1978) Insulated electro grade copper (IS:613-1984) conductor winding in startor & all necessary spare parts and reassembling the same in/c servicing of motor & necessary trial run as per specification and direction of the Engineer-in-charge. i) 2.0 HP motor suitable for 2000 GPH capacity submerssible pumpset. |
| 2 | i) 3.0 HP motor suitable for 2000/2500 GPH capacity submerssible pumpset. |
| 3 | Repairing of 2 HP/3 HP capacity submerssible pump of different make in/c dismantling the old unserviceable pump and reassembling the pump in good condition by providing necessary trial run as per specification and direction of the Engg-in-charge. |
| 4 | Charges for lifting of 2 HP/3 HP Submersible pump- motor, column pipe assembly from existing bore well in/c stacking the column pipe assembly in suitable place and lowering the same after necessary repairing & maintenance of pump motor from site to workshop as per direction of Engineer -in-charge. |
| 5 | Supplying and installation of water lubricated submersible pump having ISI mark of capacity 2000 GPH of total head 60 mtr. Couple with submersible motor 3HP suitable for 240voltage (+10% variation single phase 50Hz, AC supply DOL starting method to run 2880RPM along with 35mtr 2.5sqm PVC insulated 3(three) core flat copper cable including fitting and fixing, lowering with 40mm dia GI pipe upto 100ft (30.00mtr) etc. complete as per direction of the Engineer-in-charge( cost of 40mm GIfitting swill be paid separetely). |
| 6 | Providing and fitting fixxing of single phase motor starter panel unit 3.0HP capacity comprising with 2 plate conductor, overload relay, capacitor, volt meter of BCH/L&T make with necessary copper wire etc. complete as per direction of the Engg-in-charge. |
| 7 | Supplying &fitting fixing of KIOSK (Size:450 x1200x850) fitted with 4 Nos. support of 75x75 mm (mm thick) MS angle of embedding with 1:2:4 cement concrete base (size 300 mm x 300 mm x 600 mm) with proper locking arrangement and coated with anticorrosive paint (both inside and outside) includingcomplete in all respect as per direction of the Engineer-in-Charge. |
| 8 | Supplying and fitting fixing of 32 Amp single phase Main Switch of BCH/L&T/Havel's make with necessary copper wire wiring etc.Complete as per direction of the Engineer-in-Charge. |
| 9 | Providing and fixing G.I pipes of medium class as per IS: 1239 with latest ammendment complete with G.I fitting including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer-in-charge.A. External work. i) 15mm dia nominal bore |
| 10 | ii. 40mm dia nominal bore |
| 11 | Excavation trenches of required width for pipes for pipes, cables etc. inluding excavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500mm including getting out the excavated soil and backfilling of soil as requred after laying of pipe line, in layers not exceeding 200mm in depth in/c consolidation each deposited layer by ramming. water et. and disposing of surplus excavated soil with all required leads as per chapter 2 of CPWD specificationh and direction of the Engineer-In -Charge.A) For UPVCD work in new work. a) all kind of soil.i) For pipes not exceeding 90mm dia. |
| 12 | Providing &laying of flexible PVC pipe(conforming to IS:7634) complete as per specification and direction of the Engineer-in-charge(cost of earth work and fittings will be paid separately) a) 15 mm dia |
| 13 | a) 20 mm dia |
| 14 | a) 25 mm dia |
| 15 | Providing, fixing and laying Rigid UPVC pipes conforming to IS: 4985 jointing with couplers of same class conforming to IS:10124(Pt-II) with solvent cement conforming to IS: 14182 including testing of joints complete(but excluding the cost of specilas like bend, tees etc. which will be paid separately) as per CPWD specification and direction of the Engineer-in-charge.D. Class-3(Working pressure 6.00 kg/cm2) i) 40mm dia |
| 16 | Making road crossing by horizontal boring for smooth laying of UPVC/CI/DI/GI pipes etc. of required dia complete as per specification and direction of the Engineer-in-charge.a. By manual means |
| 17 | Providing and fitting fixing GI union joint as per CPWD specification and direction of the Engineer-In-Charge. i)15 mm dia. |
| 18 | ii)25 mm dia. |
| 19 | iii)40 mm dia. |
| 20 | Providing and fitting fixing GI Bend/ elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer-In-Charge.a) 15 mm dia |
| 21 | b) 25 mm dia |
| 22 | c) 40 mm dia |
| 23 | Providing and fixing G.I. Full way valve as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. a)40mm dia. |
| 24 | Providing and fitting fixing PVC / plastic bib cock conforming to IS : 9763 in hydrant points at different location as per specification & direction of the Engineer-in-charge. i)15 mm dia PVC /plastic bib cock |
| 25 | Providing and fixing brass ferrule with C.I. cover conforming to IS : 2692 including boring and tapping the main as per CPWD specification and direction of the Engineer - in - charge. i)10 mm nominal bore |
| 26 | Providing and fixing GI socket as per CPWD specification and direction of the Engineer-In-Charge. i) 15mm dia. |
| 27 | ii) 25 mm dia. |
| 28 | ii) 40 mm dia. |
| 29 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. i) 2.50 sqmm |
| 30 | Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer - in - charge. Please Enable Macros to View BoQ information |
