|
| 1 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed |
| 2 | M&L for 15 mm thick stone masonry surfaces or surface other than fair face ofbrick-work or on one side of lathing in CM 1:4 finished fair and even all as specified and as directed. |
| 3 | Preparing new plastered surfaces and M&L for applying two coats of cement base paint on new plastered surfaces all as directed by Engr-in-Charge. |
| 4 | Preparing old plastered surfaces and M&L for applying one coats of cement base paint on new plastered surfaces all as directed by Engr-in-Charge. |
| 5 | Dismantling posts or struts (wood , steel or RCC) any section, including taking out embedded portion from hardcore, concrete work or masonry work, complete all as specified and as directed. |
| 6 | Dismantling fencing wire mesh,any type complete all as specified and as directed. |
| 7 | Excavation in post holes in soft/loose soil not exceeding 0.50 Cubic metre each and getting out, returning, filling in and ramming earth or broken rubble moxed with earth around,in layers not exceeding 25cm, watering and removal of surplus spoil to a distance not exceeding 50 metres and making good surface, as in soft loose soil complete all as specified and as directed. |
| 8 | S&F Mild steel work as in angle iron posts or struts for fencing conforming to Fe-290 Gde E-165 as directed, including cutting top to ashape as directed, drilling holes, notching for wire etc including cutting and twisting necessary drilling, bolting and revieting or welding etc and similar works, complete all as specified and as directed. |
| 9 | M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed. |
| 10 | S&F in repair galvanised iron two strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs @ 75mm c/c spacing and straining and fixing to any type of standard rail, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, stappies or steel pin, complete all as specified and as directed. Note: each line of wire to be measured. |
| 11 | Supplied only chain link MS galvanised fencing any size or type complete all as specified and as directed. |
| 12 | Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc; including provn of binding wire complete all as specified and as directed. |
| 13 | S&F for mild steel round bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally, hooking up ends and binding or securing for fencing etc; confirming to Fe-410-W (Gde-E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified. |
| 14 | S&F for mild steel nuts and bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be provided with one washer and nut length of bolt exc5cm but n exc 10cm long with dia of neck 5 to 10 mm complete all as specified and as directed. |
| 15 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 16 | MS framed work as in doors or gates of flat, angle, rolled or other section partly ornamental/ intricate design , incl gusset plates, braces etc but without coverings incl all necessary welding and / or rivetting etc including pintle or any other type of hinges Fe - 250 (Gde E-250) Quality A complete all as specified and as directed. |
| 17 | Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 18 | Preparing old surfaces of steel or iron work of any description and girth over 10cm and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 19 | M&L for Jodhpur stone patti slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, laid dry as in manhole coveres, sizes as directed by Engineer-in-charge complete all as specified and as directed. |
| 20 | M & L for Precast RCC 1: 2:4, type B1 (nominalmix ) using 20mm graded stone aggregates as in cover slab etc complete all as specifide and directed. |
| 21 | M & L for Mild steel TMT bars 10mm dia and over as in reinforcement,cut to length bent to shape required including hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified. |
| 22 | M & L for Mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 23 | Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site complete all as specified and as directed. |
| 24 | Demolition of old RCC cover manhole/drain cover slab etc complete all as specified and directed. |
| 25 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid fry or laid dry and pointed complete all as specified. |
| 26 | M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified and as directed. |
| 27 | M&L for 100mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified and as directed. |
| 28 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete.all as specified and as directed. |
| 29 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 30 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 31 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set with grey cement and no pigments, jointed and pointed in neat cement slurry in floors |
| 32 | M & L for 300x300x10mm thick Exterior grade cement concrete tiles as in floor/pavings set and jointed in neat grey cement slurry and pointed with mixture of white cement and pigment over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 33 | M & L Providing precast cement concrete type C-0,1:3:6 (12.5mm graded aggregate) as in louvres and jallies, 25mm thick (mea sured solid), set in cement mortar 1:4 including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item complete all as specified and directed. |
| 34 | Providing precast cement concrete type B-1,1:2:4 (20mm graded stone aggregate ) as in window or door cills, lintels,bressumers, steps,quoin blocks (for use with masonry),string courses, copings.kneelers, apex stones, pier caps, columns, posts, boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling).corbels, brackets, etc. (of any section indicated), with plain fair faces,including chamfers,weatherings,throat- ing etc. and setting in mortar complete with joints to match set in CM 1:4 complete all as specified. |
| 35 | M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified and as directed. |
| 36 | Dismantling Brickwork or stone/ boulder masonry, cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 37 | M&L Squared rubble walling Jodhpur type,regular coursed, well bonded, bedded and solidly hearted, built in CM1:4 complete all as specified. |
| 38 | All as item No-37 above but exept stone masonary complete all as specified.Note- item reused obtained from demolition |
| 39 | M&L for providing precast cement concrete type C-1,1:3:6 (20mm graded stone aggregate ) block masonary with solid blocks exc 10cm in width and setting in cement mortar 1:6 all as specified and as directed. |
| 40 | M&L for PCC 1:3:6, type C-1 (using 20mm graded stone agg) as in surface channels and drain,laid to slope, complete all as specified and as directed. |
| 41 | Providing, type-B-1,1:2:4 (12.50 mm thick graded aggregate ) as cement concrete in roof kerbs or mud stops, rounded or chamfered on edges coping complete all as specified. |
| 42 | M&L Keyed pointing to random or polygonal rubble, uncoursed or brought upto coursein cement mortar (1:4), including raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and as directed.Note - The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
