|
| 1 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).2nd Class Kail Wood |
| 2 | Providing and fixing 19mm Thick Ply wood good quality of approved Brand incld. Nail ,But Hinges , fevicol and carriage etc complete. |
| 3 | Providing and fixing 12mm Thick Ply wood good quality of approved Brand incld. Nail , fevicol and carriage etc complete. |
| 4 | Providing and fixing 4mm Thick Sunmica of good quality of approved Brand incld. Fevicol , Hetich , beading nail etc complete. |
| 5 | Providing and fixing Almirah lock of good quality incld. All types of fixture complete . |
| 6 | Providing and fixing fancy type Handle 6\\" long all types of Fixture complete. |
| 7 | Demolishing stone rubble masonry manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-charge |
| 8 | In Cement Mortar |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6gradedstone aggregate 40 mm nominal size derived from natural sources |
| 10 | Centering and shuttering including strutting, propping etc. and removal of formwork for :4.3.1 Foundations, footings, bases for columns |
| 11 | Providing and fixing of Angle Iron Post & Flate Iton of Required Size incld. Welding , cutting and Priming and Pinting with all carriage complete. |
| 12 | Providing and laying damp proof coarse 50mm thick with cement concrete 1:2:4 (1 cement,2coarse ,4stone agg.) 20 mm nominal size I |
| 13 | 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).2nd Class Kail Wood |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)Second class kail wood9.5.5.1 35 mm thick shutters |
| 16 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :9.7.2.2 Second class Kail wood |
| 17 | Supplying and fixing in position glass pane 3.5mm thick incld. Cost of wooden beading complete. |
| 18 | Applying priming coat:13.50.1With ready mixed pink or Grey primer of approved brand and manufacture onwood work (hard and soft wood) |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :13.62.1Two or more coats on new work over an under coat of suitable shade withordinary paint of approved brand and manufacture |
| 20 | Providing and fixing of 5mm Thick Puff Insullation with ruber cover incld. Aluminium sheet over the area of Expension Joint . |
| 21 | Carriage of sand/ Bajri for an avg lead of 15 from availble source to site of work . |
| 22 | R/Wall |
| 23 | Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 24 | All kinds of Soil @80% |
| 25 | Soft Rock @10% |
| 26 | Hard Rock @10% |
| 27 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc.complete. |
| 28 | Random Rubble masonry with and stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand) |
| 29 | Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bound stone. |
| 30 | Providing and laying damp proof coarse 50mm thick with cement concrete 1:2:4 (1 cement,2coarse ,4stone agg.) 20 mm nominal size I |
| 31 | Earth work in excavation by mechanical means (Hydraulic Excavator) over areas exceeding 30cm and up to 1.50Mtr in depth 1.5 mtr in width as well as 10 sqm on plan)Including disposal of excavated earth upto 1Mtr from cutting edge, disposed earth to be leveled and neatly dressed in: |
| 32 | Providing and laying of M.S.Pipe 300mm dia 5.4mm thick with a weight of 42.42kg/Rm and a length of 6m long for cross drainage work incld. Constt. Of catch pits at the inlet and out let in M-15 grade concrete and providing and laying a bed of sand layer and providing earth cushion to the required grade and cross section.(As direct by Engineer -in-charge as per drawing and relevant /RC specifications code. |
| 33 | Providing, supplying, loading, unloading, transportation and erection of Pre-stressed Cement Concrete (PCC) electric pole of 8.0 Mtr length, 200 Kg working load conforming to IS:1678 complete with M.S. cross bracket/cross arm fabricated from 50×50×6 mm M.S. angle iron including clamps, nuts, bolts, washers, drilling, painting/hot dip galvanizing, excavation of pits, pole planting, alignment, ramming, refilling and all allied works complete in all respects as per specifications and directions of Engineer-in-Charge |
| 34 | Supply, erection, stringing and commissioning of 6 mm dia hard drawn aluminium conductor over electric poles including insulators, binding, sagging and all allied accessories complete in all respects. |
| 35 | Disposal of excavated earth by mechnical Transport for an avg lead of 2Km by Mt incld. Loading ,Unloading complete. |
| 36 | Supplying and fixing 10mm dia copper wire for main line connection from pole to MCB Box incld. All type of accessories etc. complete. |
| 37 | Providing and fixing energy meter Digital for single Phase incld. Type of accssories etc compete |
| 38 | Carriage of sand/ Bajri for an avg lead of 15 from availble source to site of work . |
| 39 | Carriage of stone for an avg lead of 2 from availble source to site of work . |
| 40 | P/F PPR pipes complete with PPR fittings and clamps, including cutting and making good the walls , Tank Nipple Tee Union , Elbow Bend ,Sockets etc. as directed by incharge engineer. |
| 41 | 25 mm dia |
| 42 | 32 mm Dia |
| 43 | Providing and fixing Stainless steel Parda rod with Both end side wooden Braket all accessories complete. complete. Please Enable Macros to View BoQ information |
