|
| 1 | Construction of Dedicated 11kV feeder from 33/11kV Tarun Nagar GIS DSS to HQ ADGBR(E) Complex AT Jalukbari, Guwahati(refer Annexure-1)Itemwise price should be filled in strictly as per the detailed Bill of Quantities at respective referred Annexure. |
| 2 | GI Steel Tubular Pole SP-80 (16.00) |
| 3 | GI Steel Tubular Pole SP-76 (14.50) |
| 4 | GI Channel Cross Arm (100x50x6x2200mm) |
| 5 | 11kV Pin Insulator (Polymer) 5KN (FRP 24mm) |
| 6 | 11kV Disc Insulator (Polymer) 45kN (B&S Type) |
| 7 | 11kV H/W fitting for Disc Insulator T&C 45kN tension type |
| 8 | 11 KV MVCC 1C X 120 Sq MM AAAC Covered Conductor |
| 9 | 11 KV Tension Insulator 1C X 120 Sq MM AAAC Covered Conductor |
| 10 | 11 KV Tension Hardware 1C X 120 Sq MM AAAC Covered Conductor |
| 11 | 11 KV Cable Tie 1C X 120 Sq MM AAAC Covered Conductor |
| 12 | GI Angle (50x50x6)mm |
| 13 | Pole Clamp of GI |
| 14 | PG Clamp |
| 15 | ACSR \\" RACCON\\" Conductor |
| 16 | GI LT Angle Cross Arm (40x40x6x500)mm |
| 17 | LT Pin Insulator (Porcelain) |
| 18 | Shackle Insulator Porcelain |
| 19 | GI earthing Pipe 50mm dia 3m length 3.15 mm thickness with perforated holes of 15mm dia at 30 cm interval along length of the pipe |
| 20 | GI Nuts & Bolts with Washer(Assorted) |
| 21 | GI Barbed wire Type A (Anticlimbing) |
| 22 | 33KV Danger Plate |
| 23 | Hot Dip GI Wire 6 SWG for earthing |
| 24 | 11KV DO Fuse Set 200A Assembly |
| 25 | 11KV GOAB Switch 150Amp |
| 26 | 11/0.4KV 250KVA DTR - BIS Level - 2 |
| 27 | GI Strip 25x3mm for DTR earthing |
| 28 | Gi Strip 50x6mm for DTR earthing |
| 29 | 11KV LA(Line type) |
| 30 | Microprocessor based with inbuilt earth-fault protection module 4 Pole MCCB 400A ICS = 100% ICU 36kA (Minimum) |
| 31 | Metering Cabinet |
| 32 | CABLE - CROSS LINKED POLYETHYLENE CABLE (ALUMINIUM) 1.1kV (LT) GRADE (ARMOURED) 1C x 400 sq.mm. |
| 33 | Aluminium Lugs-400Sq mm |
| 34 | HT Stay Set |
| 35 | Hot Dip GI Wire Stay Wire 7/10 SWG (For HT) |
| 36 | HT Guy Insulator (Porcelain) |
| 37 | Grouting & mufflering of steel tubular pole of type SP-80 as per specification and drawing with minimum planting depth of 2.45 m (using PCC) |
| 38 | Grouting & mufflering of steel tubular pole of type SP-66 ,SP-76 & SP-22 as per specification and drawing with minimum planting depth of 2.15 m (using PCC) |
| 39 | Transformer pad for Distribution Transformer complete as per specification |
| 40 | DTR Fencing as per REC standard specification complete with material & labour |
| 41 | Grouting of Stay Set with PCC and Boulder |
| 42 | EARTH PIT CHAMBER Please Enable Macros to View BoQ information |
