|
| 1 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required |
| 2 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 3 | Supply and fixing of 25mm x5 mm G.I strip on surface or in recess i/c making connection as reqd |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 5 | Upto 35 sq. mm |
| 6 | Above 95 sq. mm and upto 185 sq. mm |
| 7 | Above 185 sq. mm and upto 400 sq. mm |
| 8 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 9 | 4 X 16 sq. mm (28mm) |
| 10 | 3.5 X 35 sq. mm (32mm) |
| 11 | 3.5 X 95 sq. mm (45mm) |
| 12 | 3.5 X 120 sq. mm (45mm) |
| 13 | 3.5 X 185 sq. mm (57mm) |
| 14 | 3.5 X 240 sq. mm (62mm) |
| 15 | 3.5 X 300 sq. mm (70mm) |
| 16 | Supply, erection, testing and commissioning of 415V, 3 phase 4 wire 50 Hz , cubical type feeder pillar, IP 65 (outdoor type) fabricated CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having capacity extensible type DMC / SMC FP bus bars of high conductivity, DMC/ SMC bus bar supports , bottom base channel of MS section of suitable size, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars etc. complete in all respect as per CPWD specification complete with necessary accessories, wiring with 2.5sq. mm. FRLSH insulated copper conductor , cable alleys, cable gland and following incoming and outgoing switchgears with protection and metering etc.as required at site. All MCCBs above 63A should be provided with Spreader Terminals. Approval shall be taken for each panel before fabrication. |
| 17 | Incomer125A FP MCCB (36kA) with microprocessor realease -1 Nos. having O/L, E/F and S/C Protection, Incomer should be Suitable for cable termination. RYB on, off trip indication lamp-1 set., Multi-Function Meter with CT-1 set.Busbar 200A FP Al busbar Extensible typeOutgoing :1. 100 Amp Timmer switch - 01 Nos.2. 40 A FP MCB (10kA) - 15 nos.3. 63A DP MCB (10kA) -4 nos.Connecting terminal (Inside cable alley) of all MCB should be suitable for connection with Aluminium armoured cable upto size 16sqmm. |
| 18 | Supply, erection, testing and commissioning of 415V, 3 phase 4 wire 50 Hz , cubical type feeder pillar, IP 65 (outdoor type) fabricated CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having capacity extensible type DMC / SMC FP bus bars of high conductivity, DMC/ SMC bus bar supports , bottom base channel of MS section of suitable size, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars etc. complete in all respect as per CPWD specification complete with necessary accessories, wiring with 2.5sq. mm. FRLSH insulated copper conductor , cable alleys, cable gland and following incoming and outgoing switchgears with protection and metering etc.as required at site. All MCCBs above 63A should be provided with Spreader Terminals. Approval shall be taken for each panel before fabrication. |
| 19 | Incomer630A TP MCCB (50kA) with microprocessor realease with O/L &S/C protection -1 Nos., Incomer should be Suitable for cable termination. RYB on, off trip indication lamp-1 set., Multi-Function Meter with CT-1 nos. and rotary handleBusbar 800A FP Al busbar Extensible typeOutgoing :1. 400A TP MCCB (35kA) thermal magnetic based with O/L, S/C Protection., Rotary Handle - 2 nos. RYB on, off trip indication lamp - 2 set, Multi-Function Meter with CT - 2 set.2. 250A TP MCCB (35kA) thermal magnetic based with O/L, S/C Protection. Rotary Handle - 4 nos. RYB on, off trip indication lamp - 4 set, Multi-Function Meter with CT - 4 set.Connecting terminal (Inside cable alley) of all MCB should be suitable for connection with Aluminium armoured cable upto size 300 sqmm. Please Enable Macros to View BoQ information |
