|
| 1 | SH-I: Design, Fabrication, Supply, Installation, Testing and Commissioning of Single part opening M. S. Sliding Trolley Gate. |
| 2 | Design, Fabrication, Supply, Installation, Testing and Commissioning of Single part opening M. S. Sliding Trolley Gate having length approx. 130 Meters and 2.50 mtr. height from Finished Floor Level including Wheel Height suitable for movement on M. S. Angle Track fixed on M. S. U channels as per the enclosed specifications and drawings including carrying out required fabrication works complete as required.Horizontal Base Frame of trolley gate shall be made of MS Pipe section of Size 100mm x 100 mm of 3mm thickness & Vertical frames shall be made of MS Pipe section of size 50mm x 50mm x 5 mm with side supports of suitable size M.S. Angle / Tube & 'U' shaped clamp/frame on top for concertina coils.Items also includes painting of gate with synthetic enamel paint of approved colour & make by applying 2 or more coats and one or more coat of red oxide Primer complete etc. as required. |
| 3 | Design, Fabrication, Supply, Installation, Testing and Commissioning of Single part opening M. S. Sliding Trolley Gate having length approx. 110 Meters (to be fabricated in two section with movement on single track and closing length of two sections with available space is maximum 60 Mtrs) only 2.50 mtr. height from Finished Floor Level including Wheel Height suitable for movement on M. S. Angle Track fixed on M. S. U channels as per the enclosed specifications and drawings including carrying out required fabrication works complete as required.Horizontal Base Frame of trolley gate shall be made of MS Pipe section of Size 100mm x 100 mm of 3mm thickness & Vertical frames shall be made of MS Pipe section of size 50mm x 50mm x 5 mm with side supports of suitable size M.S. Angle / Tube & 'U' shaped clamp/frame on top for concertina coils.Items also includes painting of gate with synthetic enamel paint of approved colour & make by applying 2 or more coats and one or more coat of red oxide Primer complete etc. as required. |
| 4 | Supply, fabrication, Installation, testing & Commissioning of Wiremesh of size 35mm x 35mm of 3mm dia wire with 25mm X 25mm X 3mm M.S. Angle frame in vertical and cross sections frames throughout the above M.S Sliding Trolley Gate as per specifications including painting with synthetic enamel paint of approved colour & make by applying 2 or more coats and one or more coat of red oxide Primer etc. complete as required. |
| 5 | Supply, Installation, Testing & Commissioning of suitable size (not exceeding 300mm) M. S. wheels set( 2 nos. wheels per set) with robust shaft and blocks for less noise operation alongwith pillow block bearing units of reputed make and all associated accessories, works and painting etc. complete as required. |
| 6 | Supply & Fixing MS angle of size 50mm X 50mm X 6mm in MS U channel of size 100mm X 50mm X 5mm including fixing of track on exisitng surface & making good as per site requirement complete etc as required. |
| 7 | Supply, Installation, Testing and Commissioning of suitable dead end barrier at the end of track of trolley gate with MS channel of size, 100mm X 50mm X 5mm and cross arm of angle iron of size 45mm x 45mm with thickness of 4mm i/c welding etc. as required as per design / drawing. |
| 8 | Design, Supply, Installation Testing and Commissioning of outdoor type (IP-65) PLC based automation system with remote control for operation of sliding trolley gate length of 130 Mtrs having approx. weight upto 10000 kg as per enclosed particular specifications . The power drive shall be suitable for operation on single / 3 phase power supply system (230/415 + 10 % volts) and suitable to drive the required load smoothly complete as reuired as per enclosed particular specifications. Job also includes starter panel with safety devices / Relays , foundation/ Frame work for installation of motor , provision of Two no. LED flashing light with buzzer over the gate etc as required . Provision of radio receiver for auto diagnosis of all safety controls ‐ 1 Nos. and Radio transmitter (Remote control unit) (433.92 MHz/30.9 MHz) ‐ 2 nos. for remote operation complete etc as required.Also supply and fixing radium reflector on GATE written as \\"STOP\\" with suitable nos ( not less than 4 nos) and Sizes of font not less than 150mm are covered in this item . |
| 9 | Design, Supply, Installation Testing and Commissioning of outdoor type (IP-65) PLC based automation system with remote control for operation of sliding trolley gate length of 110 Mtrs having approx. weight upto 10000 kg as per enclosed particular specifications . The power drive shall be suitable for operation on single / 3 phase power supply system (230/415 + 10 % volts) and suitable to drive the required load smoothly complete as reuired as per enclosed particular specifications. Job also includes starter panel with safety devices / Relays , foundation/ Frame work for installation of motor , provision of Two no. LED flashing light with buzzer over the gate etc as required . Provision of radio receiver for auto diagnosis of all safety controls ‐ 1 Nos. and Radio transmitter (Remote control unit) (433.92 MHz/30.9 MHz) ‐ 2 nos. for remote operation complete etc as required.Also supply and fixing radium reflector on GATE written as \\"STOP\\" with suitable nos ( not less than 4 nos) and Sizes of font not less than 150mm are covered in this item . |
| 10 | Design, SITC of Cable tray system as for 130m long trolley gate as per site requirement. |
| 11 | Design, SITC of Cable tray system as for 110m long trolley gate as per site requirement. |
| 12 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3.5 mtr height of wall with existing angle iron frame placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer‐in‐charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). |
| 13 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (All kinds of soil) |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering ‐ All work up to plinth level, complete as required: 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size). |
| 15 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 17 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement ‐ All work up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 18 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.A) Thermo ‐ Mechanically treated bars of grade Fe‐ 500D or more. |
| 19 | Design, manufacture, supply, installation, testing and commissioning of outdoor type double door feeder pillar (For 130 Mtr Trolley Gate), made of 14 SWG CRCA sheet steel, totally enclosed, standing on a MS Angle frame suitably fixed on floor foundation, dust and vermin proof, powder coated painting, suitable for operation on 3 phase and neutral, 415 V, 50 Hz AC system with busbars, connection and interconnections including supply & installation of following items and as per specifications :Incoming : 02 Nos., 125 Amp., 4 Pole, MCCB having (Ics=100%Icu, 25 kA) with thermal release spreader links and extendable ON/OFF rotary handle.CT's of ratio 100/5 Amps.‐2 Set (1 Set of 3 Nos.)Digital Ammeter with selector switch ‐ 2 set,Digital Voltmeter with selector switch‐ 2 set 6 Nos. Phase indication LED Lamps with 2 Amp. MCBs, 2 Nos. red ON indication LED Lamps with 2 Amp.MCBs2 Nos. green OFF indication LED Lamps with 2 Amp. MCBsBus coupler :01 No. 125 Amp., 4 Pole, MCCB having (Ics=100%Icu, 25 kA) with thermal release spreader links and extendableON/OFF rotary handle.1 Nos. red ON indication LED Lamps with 2 Amp.MCBs, 1 Nos. green OFF indication LED Lamps with 2 Amp. MCBsBus‐Bars :4‐Pole Aluminium bus bars of minimum of 200 Amps. Capacity with heat shrinkable coloured sleeves & i/c. DMC /SMC bus bars supports at required intervals complete for cross section, size supports and their spacing etc. Outgoings :RCBO, 4 pole, 16 A, sensivity 300 mA ‐ 4 nos. SPN MCB, 10 A, G series ‐ 02 nos.4 Pole MCB , 63 A = 04 Nos with electronic timer and suitable contactorNote : 2 Incomers & bus couplers are to be interlocked electrically & mechanically in a way so that only 2 (out of 3) can be Switched ON at a time. (All required hard ware i.e. Relays, control wiring etc are included in this item.) |
| 20 | Design, manufacture, supply, installation, testing and commissioning of outdoor type double door feeder pillar,(For 110 Mtr Trolley Gate), made of 14 SWG CRCA sheet steel, totally enclosed, standing on a MS Angle frame suitably fixed on floor foundation, dust and vermin proof, powder coated painting, suitable for operation on 3 phase and neutral, 415 V, 50 Hz AC system with busbars, connection and interconnections including supply & installation of following items and as per specifications :Incoming : 02 Nos., 125 Amp., 4 Pole, MCCB having (Ics=100%Icu, 25 kA) with thermal release spreader links and extendable ON/OFF rotary handle.CT's of ratio 100/5 Amps.‐2 Set (1 Set of 3 Nos.)Digital Ammeter with selector switch ‐ 2 set,Digital Voltmeter with selector switch‐ 2 set 6 Nos. Phase indication LED Lamps with 2 Amp. MCBs, 2 Nos. red ON indication LED Lamps with 2 Amp.MCBs2 Nos. green OFF indication LED Lamps with 2 Amp. MCBsBus coupler :01 No. 125 Amp., 4 Pole, MCCB having (Ics=100%Icu, 25 kA) with thermal release spreader links and extendableON/OFF rotary handle.1 Nos. red ON indication LED Lamps with 2 Amp.MCBs, 1 Nos. green OFF indication LED Lamps with 2 Amp. MCBsBus‐Bars :4‐Pole Aluminium bus bars of minimum of 200 Amps. Capacity with heat shrinkable coloured sleeves & i/c. DMC /SMC bus bars supports at required intervals complete for cross section, size supports and their spacing etc. Outgoings :RCBO, 4 pole, 16 A, sensivity 300 mA ‐ 4 nos. SPN MCB, 10 A, G series ‐ 02 nos.4 Pole MCB , 63 A = 04 Nos with electronic timer and suitable contactorNote : 2 Incomers & bus couplers are to be interlocked electrically & mechanically in a way so that only 2 (out of 3) can be Switched ON at a time. (All required hard ware i.e. Relays, control wiring etc are included in this item.) |
| 21 | Supply of 4C x 35 sq. mm LT Power cable of 1.1 KV Grade aluminium conductor XLPE insulated PVC sheathed armoured cable confiriming to IS:7098 part ‐I 1988 with upto date ammendment as required. |
| 22 | Supply of 4C x 6 sq. mm LT Power cable of 1.1 KV Grade aluminium conductor XLPE insulated PVC sheathed armoured cable confiriming to IS:7098 part ‐I 1988 with upto date ammendment as required. |
| 23 | Supplying and laying of 63 mm dia (OD‐63 mm & ID‐51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. |
| 24 | Laying of one number PVC insulated & PVC sheathed power cable of 1.1 KV grade of size not exceeding 35 Sq.mm. in the existing RCC Hume/ Stoneware / GI pipe/ DWC HDPE Pipe etc as required. |
| 25 | Supply and making end termination with brass compression gland and aluminium thimbles for PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade of 4 core, 35 Sq. mm sizes as required. |
| 26 | Supply and making end termination with brass compression gland and aluminium thimbles for PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade of 4 core, 6 Sq. mm sizes as required. |
| 27 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 28 | Providing and laying earth connection from earth electrode with 6 SWG dia GI Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re‐filling as required. |
| 29 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 30 | Providing, laying and fixing 50 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re‐filling etc as required. |
| 31 | Dismantling & Shifting of existing trolley gates materail within the 1 KM range. |
| 32 | SH-II: AICMC.All inclusive Comprehensive maintenace of above entire system of Motorized Sliding Trolley Gate (130 Mtr & 110 Mtr) includes gates, Automation System with drives, Electrical Panels, Wheels, Bearings, Nylon rollers, Chain Sprouket / Gear System, Bottom track as provided under the main contract including trouble shooting, preventive maintenance and break down maintenance as required as per good engineering practice, recommendation of the original equipment manufacturer. |
| 33 | For 3rd Year (after completion of two years defects liability period)- 5%age of SITC cost |
| 34 | For 4th Year 5.25 %age of SITC cost |
| 35 | For 5th Year 5.51 %age of SITC cost |
| 36 | For 6th Year 5.79 %age of SITC cost |
| 37 | For 7th Year 6.08 %age of SITC cost |
| 38 | For 8th Year 6.38 %age of SITC cost |
| 39 | For 9th Year 6.70 %age of SITC cost |
| 40 | For 10th Year 7.04 %age of SITC cost |
| 41 | For 11th Year 7.39 %age of SITC cost |
| 42 | For 12th Year 7.76 %age of SITC cost |
| 43 | For 13th Year 8.14 %age of SITC cost Please Enable Macros to View BoQ information |
