|
| 1 | Stripping off worn out plaster and raking outjoints of walls, celings etc. upto any height and inany floor including removing rubbish within alead of 75m as directed. |
| 2 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding /staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface (iii) With 1:4 cement mortar (a) 20 mm thick plaster i) Ground Floor |
| 3 | ii) 1st Floor |
| 4 | iii) 2nd Floor |
| 5 | Extra for using \\"Sika Tpo-77\\"(High quality multy functional AcrylicEmulsion cum water proofing agent )with cement morter(1:3) @ 10%by weight of cement to make polymer enriched damp proof morter for plaster with (1:4) cement morter thick 20mm |
| 6 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) Add extra for each additional floor over the rate for ground floor for the above item when used on External Surface Above 4th floor |
| 7 | Applying Interior grade Acrylic Primer of approved quality and brandon plastered or cencrete surface old or new surface to receiveDistemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturer's specification andas per direction of the EIC. (In Ground Floor)(a) One CoatSolvent based interior grade Acrylic Primeri) Ground Floor |
| 8 | ii) 1st Floor |
| 9 | iii) 2nd Floor |
| 10 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two coats) ii) Luxury Quality |
| 11 | ii) 1st Floor |
| 12 | iii) 2nd Floor |
| 13 | Applying Exterior grade Acrylic primer of approved quality and brandon plastered or cencrete surface old or new surface to receivedecorative textured (matt finish) or smooth finish acrylic exterioremulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Up to 4th floor (a)Two Coats (i) Ground floor |
| 14 | ii) For 1st floor |
| 15 | iii) For 2nd floor |
| 16 | Scraping and removing greasy soot from walls or ceiling of kitchen orsimilar smoke affected rooms and preparing the surface. |
| 17 | Protective and Decorative Acrylic exterior emulsion paint of approvedquality, as per manufacturer's specification and as per direction ofEngineer-in-Charge to be applied over acrylic primer as required. Therate includes cost of material, labour, scaffolding and all incidentalcharges but excluding the cost of primer a) Two coats b) Premium 100% Acrylic Emulsion i) Ground floor |
| 18 | ii) For 1st floor |
| 19 | iii) For 2nd floor |
| 20 | Supplying, fitting and fixing bib cock or stop cock.(d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 21 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 22 | Supply of Labour for washing and cleaning the office premises, Toilet Blocks, etc. (Un-Skilled labour) |
| 23 | Supplying, fitting and fixing white vitreous china best quality approved,make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillarcock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut includingmending good all damages and painting the brackets with two coats ofapproved paint.(i) 450 mm X 300 mm size |
| 24 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) |
| 25 | Supplying, fitting and fixing CPVC (Chlorinated PolyvinylChloride) pipes of approved make conforming to IS-15778:2007 . with all necessary accessories, specials viz. socket,bend, tee, union, cross, elbo, nipple, longscrew, reducingsocket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, fitting, fixing etc. completein all respect including cost of all necessary fittings as required, jointing materials in any position above ground.(Payment will be made on the centre line measurements oftotal pipe line including all specials. No separate paymentwill be made for accesories, specials.(Dia)25 mm(a) For Exposed Work (i) CPVC Pipes Class-I,SDR-11 |
| 26 | Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc.(B) WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(i)(i) Coloured decorative |
| 27 | Removal of rubbish,earth etc from the warking site and disposal of the same beyond the compound , in conformity with the Municipal/CorporationRules for such disposal,loading into the truck and cleaning the sitein all respect as per direction of the Engineer in charge |
| 28 | Supplying & laying 3mm thick pre-fabricated plastomericwater proofing membrane conforming to EN 12311-1 &ASTMD 5147, manufactured with atactic poly propylene(APP) modified premium grade asphalt , specially reinforcedwith non-woven polyester core with polyester reinforcement@160 gms per sqm & both faces covered with thermo-fusiblepolyethylene film /MineraL on top face over a coat of primer@ 0.40 lit/sqm of manufacturer's specification onsmooth,clean dry surface prepared wherever required.Lapjoint shall be provided of 75 mm in longitudinal & 100 mm intransverse direction and fused using LPG/ Propane torchemploying extra care ensuring full bondage, completeremoval of entrapped air and sealing edges into grooves inappropriate manner as per direction of Engineer -in-chargeall complete including materials,labour and applicabletaxes. (Payment shall be made on the basis of finishedsurface area.).Membrane Property: Softening Point > 150 deg C, ColdFlexibility < -6 deg C, Tensile Strength, N/cm : 600(longitudinal), 450 (transverse), Tearing Strength, N:300 (longitudinal), 200 (transverse) SIKA MAKE |
| 29 | Taking out old damaged tarfelt from the roof, parapet etc.preparing the roof surfaces by removing all spoils, blisters,moss etc. from the working site and disposal of the samebeyond the compound and cleaning the site in all respect asper direction of Engineer-in-Charge.All floor |
| 30 | Providing and laying 100%Nylon multilevel loop pile Carpet Tiles of Heritage / Rosetta brand shade approved make having 100% solution dyed of 1/12th gauge having pile thickness 6.5 mm. It should be ant-microbial and with soil/ stian protection.tiles size 50Cm X 50 Cm. Product should comply with CRI Green lable plus standards.The rate includes carriage to site labour and supervision Charges,cleaning and washing the floor before laying of Carpet disposal of debris etc all complete as per direction of EIC. cost of materials washing the floor |
| 31 | G.S.T. @ 18% on Rs. 364257.27 |
| 32 | Cess @ 1% on Rs. 364257.27 Please Enable Macros to View BoQ information |
