|
| 1 | CIVIL |
| 2 | 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 3 | 5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | 5.9.6 Centering and shuttering including strutting, etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts |
| 5 | 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 6 | 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 7 | Hand Rail |
| 8 | 10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 9 | 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement: 2 coarse sand (zone-III)derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 10 | 4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 11 | ELECTRICAL WORK |
| 12 | OD378333/2025-2026 4.5-meter tall structure featuring a 1-meter diameter base and a material thickness of 2mm. The primary framework utilizes 20 GI pipes to form a panel mounting structure that supports a total of twenty 50W solar modules and twenty 9 W LED lights. |
| 13 | OD378337/2025-2026 9W DC LED Solar Luminaire is a high-efficiency outdoor lighting fixture designed specifically for off-grid solar applications. It features a heavy-duty, pressure die-cast aluminum housing with an IP65/IP66 waterproof and dustproof rating, ensuring long- term durability against harsh weather conditions |
| 14 | OD378334/2025-2026 Battery Enclosure is a heavy-duty, weather-resistant housing seamlessly integrated into the core of the solar tree's 4.5-meter central mast. Designed specifically to safely accommodate the 48V 120Ah LiFePO4 battery pack and the MPPT driver, this modular compartment utilizes an IP65-rated, non-combustible galvanized iron (GI) casing that protects the critical energy storage components from harsh environmental elements, dust, and water ingress. |
| 15 | OD378335/2025-2026 50W Solar Photovoltaic (PV) Module is constructed using high-efficiency silicon cells, optimized for reliable power output and long-term degradation resistance |
| 16 | OD378336/2025-2026 The 48V 120Ah Lithium Iron Phosphate (LiFePO4) battery pack is a high- performance, deep-cycle energy storage solution designed specifically for reliable off-grid solar applications. It provides a nominal energy capacity of approximately 5.76 kWh and features a robust, built-in Battery Management System (BMS) that actively manages cell balancing and protects the system against overcharging, deep discharging, thermal fluctuations, and short circuits. Known for its exceptional safety and stable chemistry, the LiFePO4 pack delivers an extended, maintenance-free lifespan of typically 3,000 to 6,000 cycles at an 80% Depth of Discharge (DoD), ensuring long-term, consistent power delivery for the solar tree's lighting load. with 1kW Off-Grid MPPT (Maximum Power Point Tracking) Solar Power Conditioning Unit (PCU) is designed to optimize energy harvesting and safely manage power distribution |
| 17 | 5.3 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt) as required. |
| 18 | 90.16.1.3 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor (10 SWG) |
| 19 | OD378378/2025-2026 Interconnecting Cables and Accessories for Solar Module to the Battery. |
| 20 | 90.6.5.11 Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm Please Enable Macros to View BoQ information |
