|
| 1 | Excavation in trenches n. exc 1.5m wide & n. exc 1.5m deep for foundation, pipeline etc n. exc. 10 Sqm on plan & n. exc. 1.5m depth and getting out in Soft/loose soil complete all as specified and directed. |
| 2 | Returning filling including spreading, leveling watering & well ramming in layers n. exc. 25cm in soft/loose soil complete all as specified and directed. |
| 3 | Removing excavated soil to a distance n exc 50m & depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 4 | Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins,arches, pillars, etc. complete all as specified and directed by Engineer in charge. |
| 5 | M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortor 1:6 etc. complete all as specified and directed by Engineer in charge. |
| 6 | Taking down cement plaster plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. all as specified and directed by Engineer in charge. |
| 7 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer in charge. |
| 8 | M&L for 15mm thick rendering in CM (1:4) in two layers (10 + 5 mm) mixed with approved water proofing compound @3% by weight of cement in second layer only or as per direction of manufacturer on fair faces of brick work including finished even and smooth without using extra cement complete all as specified and directed.Note : WPC shall be paid separately as supply only |
| 9 | Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness(below or above GL) complete all as specified and directed by Engineer in charge. |
| 10 | M&L for PCC 1:4:8 type, D2 (40mm graded stone agg.) as in foundation filling and mass concrete complete all as specified and directed. |
| 11 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including necessary form work complete all as specified and directed. |
| 12 | Demolation of cement concrete (reinforced) of any description and in any position not otherwise specially porvided etc. complete all as specified and directed by Engineer in charge. |
| 13 | S&F mild steel TMT bars 10mm dia & over as in reinforcement including cutting, cranking bending & binding with mild steel annealed wire not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 14 | Demolition and breaking up to 100mm bore drain pipes including fittings (AC/PVC) set in cement mortar complete all as specified and directed |
| 15 | Demolition and breaking up to 75mm bore drain pipes including fittings (AC/PVC) set in cement mortar complete all as specified and directed |
| 16 | S&F 110 mm bore, PVC (SWR), Type 'B', soil, waste and vent pipes, single socketed in any length with rubber ring joints laids in trenches or in floor, etc complete all as specified and directed. |
| 17 | S&F 75 mm bore, PVC (SWR), Type 'B', soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and directed. |
| 18 | S&F 110 mm bore, PVC (SWR), Type 'B', soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and directed. |
| 19 | S&F 75 mm bore, PVC (SWR), Type 'B', soil, waste and vent pipes, single socketed in any length with rubber ring joints laids in trenches or in floor, etc complete all as specified and directed. |
| 20 | S&F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. |
| 21 | S&F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. |
| 22 | S&F 110 mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed. |
| 23 | S&F 75 mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed. |
| 24 | S&F 110 mm bore, PVC (SWR) vent cowl fixed with solvent cement complete all as specified and directed. |
| 25 | S&F in repair for 75 mm dia PVC SWR vent cowl complete all as specified and directed. |
| 26 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and plastering the disturbed portions in CM 1:3 to match with surround surfaces, cutting out existing benching and forming branch channel (1/2 round or ¾ round section) in cement concrete 1:2:4 type B-1 finished smooth and reforming benching as required for 100/110 mm bore pipe complete all as specified and directed. |
| 27 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and plastering the disturbed portions in CM 1:3 to match with surround surfaces, cutting out existing benching and forming branch channel (1/2 round or ¾ round section) in cement concrete 1:2:4 type B-1 finished smooth and reforming benching as required for 150/160mm bore pipe complete all as specified and as directed. |
| 28 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and plastering the disturbed portions in CM 1:3 to match with surround surfaces, cutting out existing benching and forming branch channel (1/2 round or ¾ round section) in cement concrete 1:2:4 type B-1 finished smooth and reforming benching as required for 200/225mm bore pipe complete all as specified and directed. |
| 29 | Dismantling cast iron work of any description of manhole cover or similar items etc complete all as specified and directed. |
| 30 | Demolition and breaking up of drain pipes (salt glazed ware or AC or reinforced cement concrete) set in cement mortar of 150/160mm dia complete all as specified and directed. |
| 31 | M&L for Salt-glazed stoneware drain pipes 150mm dia laid in trenches and jointed complete all as specified and directed.. |
| 32 | M&L for cement concrete C-2 (1:3:6) for 150mm pipe bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed. |
| 33 | Demolition and breaking up of drain pipes (salt glazed ware or AC or reinforced cement concrete) set in cement mortar of 200/225mm dia complete all as specified and directed. |
| 34 | M&L for Salt-glazed stoneware drain pipes 200mm dia laid in trenches and jointed complete all as specified and directed.. |
| 35 | M&L for cement concrete C-2 (1:3:6) for 200 mm pipe bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed. |
| 36 | The labour attend daily complaint and covered the following items:- (a)Cleaning & clearing of sewage line different dia incl manhole by rodding, taking out the muck, mud & other debris from inside the sewage line/manholes, removing the debris to a distance exc 200m & n exc 250m & covering the same with a layer of soil not less than 15cm thick incl excavation on hard/dense soil all as directed by Engr in Charge. (b) Cleaning and cleanring of IWCs & EWCs to sewage line upto 1st manholes by rodding or any other suitable method & taking out the muck, mud and other debris from WCs and the sewage line cleaning with fresh water & removing the debris upto a distance exceeding 200M and not exceeding 250 M and covering the same with a layer of soil not less than 15cm thick all as directed by Engineer-in-Charge. (c)Cleaning of clearing of blocked chocked floor trap in kitchen & bathrooms including gully trap, the waste water line connection etc by rodding or by any other suitable method & taking out the debris to a distance exceeding 200m & not exceeding 250m & covering the same with a layer of soil not less than 15cm thick complete and drain out the floors taps, gully traps waste pipe and soil pipe with fresh water etc complete all as directed by Engineer-in-Charge. Note:- The contractor employ sufficient No of labour. If any complaint will not attend by the contractor, Rs. 15.00 will be recovered per complaint. |
| 37 | Taking out liquid/solid content from manhole/sump/septic tank and sewage lines either manually or by pumping cleaning thoroughly including disposal of liquid/solid content out of the Cantt Area and covering with layer of earth complete all as specified and directed. |
| 38 | S&F in repairs 15/20mm bore, bib taps of PTMT, any colour high pressure, screwed for iron pipe and fixed (minimum weight 90 gms for 15 mm / 125 gms for 20mm) complete all as specified and directed. |
| 39 | S&F in repair 15 mm bore, bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferule complete all as specified and directed. |
| 40 | S&F in repair 15 mm bore, stop valves (concealed type), cast copper alloy, chromium plated, long sunk and cup, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 41 | S&F in repair 15 mm bore, stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 42 | S&F in repair 600mmX450mm bevelled edge mirror of selected quality 5mm thick glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 43 | S&F 15 mm bore, pillar taps, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 44 | S&F in repairs vitreous china wash basin, size 550x400mm, white, flat back, with 32mm bore PVC (HDPE) waste pipe 450mm long, 32mm bore CP waste coupling, chain, plug and porcelain stopper & brackets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and directed. |
| 45 | S&F LDPE pipe as waste pipe 32 mm dia wash basin complete all as specified and directed. |
| 46 | S&F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 47 | S&F in repairs PVC gully traps, square 125/110mm size with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete all as specified and directed. |
| 48 | S&F in repairs cast iron floor/Nahani trap with grating 100mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B-1 including removing old traps complete all as specified and directed. |
| 49 | M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate in Manholes covers set in CM 1:4 incl dismantling old RCC cover complete all as specified and directed. |
| 50 | S&F MS TMT bars upto 10mm dia cut to length, bent to shape required including cranking, bending , binding, hooking ends abd binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 51 | S&F in repair for 75 mm dia PVC SWR vent cowl complete all as specified and directed. |
| 52 | S&F MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 53 | S&F MS framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete including dismantling of old steel/iron all as specified and directed. |
| 54 | S&F MS framed work such as framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc with ends of bars shouldered and/or riveted, or forged into spikes and similar work con- forming to Fe.290.Gde-E-165 including dismantling of old steel/iron complete all as specified and directed. |
| 55 | S&F in repairs, vitreous china, (1st quality) WHITE Squatting pan ,'Orissa' pattern size 580 mm x 440mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified and directed.. |
| 56 | S&F in repairs, vitreous China, (1st quality), wash down water closet pan ( padestal pattern Water Closet, white), (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe, etc.,complete all as specified and directed.. |
| 57 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing),and removing serviceable tiles to store and rubbish off the permises and complete all as specified and directed. |
| 58 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. over 10 mm thick back coat of cement mortar in (1:6), set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and directed. |
| 59 | M&L for glazed ceramic, coloured tiles of size 450X 300X 7 mm thick , on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortar (1:4) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 60 | M&L for vitrified ceramic tiles light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and directed. |
| 61 | Supply and fixing in repairs plastic water closet seat with cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 62 | S & F vitreous china urinals, bowel type flat back sioze 465 x 395 x 265 mm white with grating and urion for discharge pipe including providing and fixing plugs bedding against wall CM 1:2 complete fixed in repairs complete all as specified and directed. |
| 63 | S&F in repair health faucet hose and hook all as specified and directedNote:- Parry, hind, cerra approved make. |
| 64 | S&F for PVC low level flushing cistern 10litre capacity valveless,symphonic action type with inlet ball valve float and handle incl bracket PVC connection pipe and flush pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed. |
| 65 | S&F in repair 20 mm bore, ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight - 210 gms) complete all as specified and directed. |
| 66 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness(below or above ground level) etc. all as specified and directed. |
| 67 | M&L for hard core of broken stones of guage not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 68 | M&L for hard core of broken brick of guage not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 69 | M&L 75 mm thick PCC 1:4:8 Type D-2 (Using 20 mm Graded aggregate) as sub base complete all as specified and directed.. |
| 70 | M&L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone agg) as in floor etc. complete all as specified and directed. |
| 71 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry 1:4 in floors with white cement and pigment complete all as specified and directed. |
| 72 | Sand filling under floors foundation including watering and consolidation all as specified and directed. |
| 73 | M&L machine precast concrete interlocking paver block any shape size and colour confirming to IS- 15658-2006 of 60mm thickness, M-35 grade for light traffic all as specified and directed. |
| 74 | Dismantling posts or struts(wood,steel or RCC) any section embedded in concrete, brick work masonery etc including taking out embedded portion concrete ,brick work masonary work etc and making good distuebed ground complete all as specified and directed. |
| 75 | Dismantling fencing wiremesh,any type any size complete including barbed wire etc all as specified and directed. |
| 76 | M&L for PCC 1:3:6 type C-2 in fdn filling and mass concrete all as specified and directed. |
| 77 | M&L for angle iron as in fencing post, incl cutting tops to shape as directed,drilling holes, notching for wire etc flat iron fillets(for securing wire mess) including all necessary drilling, bolting or reveting etc. complete all as specified and directed.. |
| 78 | Supply only chain link MS galvanised fencing as specified complete all as specified and directed.. |
| 79 | Fixing only chain link fencing including line wires and mesh size type of standars,rails straining bolts etc complete all as specified and directed. |
| 80 | M&L for mild steel round bars 10mm dia and over cut to length bent to shape required and fixing as required in fencing complete all as specified and directed. |
| 81 | S&F MS bolts machine made with hexagonal or square head one end and screwed the other or screwed both end n exc 5cm long 12mm dia complete all as specified and directed.. |
| 82 | S&F galvanised 2 str and steel barbed wire 2.24mm dia barbed with 2mm dia bars and 75mm spacing and straining and fixing to any type of standard rails straining bold, inc securing or typing at crossing with galvanised mild steel wire staples or steel pins (each line wire to be measured ) complete all as specified and directed.. |
| 83 | M&L two coat of synthetic enamel paint to steel surface over a coat of red oxide primer n exc 10cm width or grith including preparation of new surfaces complete all as specified and directed. |
| 84 | M&L two coat of synthetic enamel paint to steel surface over a coat of red oxide primer exc 10cm width or grith including preparation of new surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
