|
| 1 | Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed.Note : Excavation where existing UG Cables/water pipe lines are crossing manual excavation only will be allowed. |
| 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 Cm thick soft / loose soil all as specified and as directed. |
| 3 | Removing excavated material (Soils) from site to a distance not exc 50 M away and depositing where directed at a level not exc 1.5mtr above the starting point all as specified and as directed. |
| 4 | Supply & laying 110mm HDPE pipe IS:4984:2016, 8 Kg/cm2 heavy grade PE-80 for cable protection complete all as specified and as directed |
| 5 | Supply & laying 63mm HDPE pipe IS:4984:2016, 8 Kg/cm2 heavy grade PE-80 for cable protection complete all as specified and as directed |
| 6 | Boring holes under road pavement by bocky manually in any type of soil upto 150 mm bore complete all as specified and directed by Engr-in-Charge. |
| 7 | Material and labour for 100 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation of brick pillar to support the pipe line including demolition of old PCC and removing the debris from site complete all as specified and as directed at site by the Engr-in-Charge. |
| 8 | Material and labour for Brick work with sub class 'B' modular bricks straight or curved on plan exc. 6M mean radius built in CM (1:4) as in brick pillar of required size and shape to support the pipe line including demolition of old brickwork & removing from site all as specified and as directed at site by the Engr-in-Charge. |
| 9 | Material and labour for rendering 10 mm thick with cement mortar (1:6) on fair faces of brick work / concrete surfaces, finished the surface even and fair complete all as specified and directed by Engr-in-Charge. |
| 10 | Material and labour for pin point the fault by arranging fault locating machine in any size of LT UG cable from any location/position/situtation, taking down/out the faulty portion of cable, of any length from trenches, jointing with cable jointing kit & testing for satisfactorily serviceable with & including necessary excavation and earth work, sand cushioning and making necessary connections to make it functional complete all as specified and as directed.Note :- (i) Cable jointing kit shall be measured and paid seperetely.(ii) Old retrieved bricks/cable cover shall be reused(iii) The rates quoted includes excavation & earth work with sand cushioning. |
| 11 | Material and labour for heat shrinkable straight through cable joint kit for 4 Core 10 Sqmm upto 4 core 25 Sqmm size cables complete all as specified and directed |
| 12 | All as per Sl. Item No.11 here-in-before but for 4 Core 35 Sqmm upto 4 Core 50 sqmm cables |
| 13 | All as per Sl. Item No.11 here-in-before but for 3.5 Core 70 Sqmm upto 4 core 120 sqmm cabes |
| 14 | All as per Sl. Item No.11 here-in-before but for 3.5 Core 150 Sqmm upto 3.5 core 240 sqmm cables |
| 15 | Supply and fixing in replacement Ammeter class 1 and including suitable CT coil in existing LT Panel board fitted complete as per existing model complete all as specified and as directed. |
| 16 | Supply and fixing in replacement Volt meter class 1 and including suitable wiring in existing LT Panel board fitted complete as per existing model complete all as specified and as directed. |
| 17 | Supply and fixing in replacement Multifunction Meter showing parameters like V, A, F, PF, kW, kVA, Run hours, kWh (EB and DG),Old energy, Site selectable kWh / kVAh and including suitable wiring in existing LT Panel board fitted complete as per existing model complete all as specified and as directed. |
| 18 | Supply and laying LT UG XLPE insulated armoured heavy duty electric, power cable with aluminium conductor, 1100 volts grade laid in trenches, fixed to poles etc cable including taking down old unsv cable of the following size 4 Core 10 Sqmm complete all as specified and directed |
| 19 | All as per Sl. Item No.18 here-in-before but of size 4 Core 16 Sqmm |
| 20 | All as per Sl. Item No.18 here-in-before but of size 4 Core 25 Sqmm |
| 21 | All as per Sl. Item No.18 here-in-before but of size 3.5 Core 35 Sqmm |
| 22 | All as per Sl. Item No.18 here-in-before but of size 3.5 Core 50 Sqmm |
| 23 | All as per Sl. Item No.18 here-in-before but of size 3.5 Core 70 Sqmm |
| 24 | All as per Sl. Item No.18 here-in-before but of size 3.5 Core 95 Sqmm |
| 25 | All as per Sl. Item No.18 here-in-before but of size 3.5 Core 120 Sqmm |
| 26 | All as per Sl. Item No.18 here-in-before but of size 3.5 Core 150 Sqmm |
| 27 | All as per Sl. Item No.18 here-in-before but of size 3.5 Core 185 Sqmm |
| 28 | All as per Sl. Item No.18 here-in-before but of size 3.5 Core 240 Sqmm |
| 29 | Taking out existing LT UG cable of sizes 4 core 25 Sqmm to 3.5 core 50 Sqmm laid in trenches/fixed to poles etc and refixing/relaying the same after connected repair works cable of following sizes :-Note : Earth work excavation will be measured and paid seperately under relevant items) |
| 30 | All as per Sl. Item No.29 here-in-before but of sizes 3.5 core to 70 Sqmm to 240 Sqmm |
| 31 | M & L for preparing old distempered and painted surfaces of walls by washing, rubbing down and stopping of surfaces and applying one coat of distemper oil emulsion (as approved tint) complete all as specified and as directed |
| 32 | M & L for preparing old painted asbestos cement building board panel surfaces of any description, over 10 cm in width or girth and applying one coat of cement base paint (as approved tint) complete all as specified and as directed |
| 33 | Supply and fixing in repairs MCCB 100 Amps 16 KA, 4 Pole thermal magnetic fixed type including studs and cable lugs in existing LT panel fixing complete all as specified and directed. |
| 34 | All as per Sl. Item No.33 here-in-before but MCCB 125 Amps 16 KA, 4 Pole |
| 35 | All as per Sl. Item No.33 here-in-before but MCCB 160 Amps 25 KA, 4 Pole |
| 36 | All as per Sl. Item No.33 here-in-before but MCCB 200 Amps 25 KA, 4 Pole |
| 37 | All as per Sl. Item No.33 here-in-before but MCCB 250 Amps 25 KA, 4 Pole |
| 38 | All as per Sl. Item No.33 here-in-before but MCCB 250 Amps 36 KA, 4 Pole |
| 39 | All as per Sl. Item No.33 here-in-before but MCCB 320 Amps 36 KA, 4 Pole |
| 40 | All as per Sl. Item No.33 here-in-before but MCCB 400 Amps 36 KA, 4 Pole |
| 41 | Supply and fixing in repair Air circuit Breaker (ACB) 4 Pole, 415 V, with microprocessor based Thermal Magnetic Release (Manual Drawout type) of capacity 800 Amps complete all as specified and directed. |
| 42 | M & L for earthing GI plate 60x60cmx6mm thick electrode and 32x6mm galvanised strip as earthing lead thick buried directly in ground vertically to a depth not less than 2.25 mtr below normal ground level, connected to copper strip of size 32x6mm as earth lead by means of bolts, nuts and washers madeout of copper or tinned brass and protection GI pipe of 40mm dia all as specified and testing complete including earthwork, PCC chamber, RCC chamber cover with handle GI watering pipe 20mm dia, GI funnel with wire mesh, magnesium sulphate, salt, charcoal, lugs etc and method of earthing shall be as per plate No :3 of SSR part -I. |
| 43 | Cutting the existing bituminious, RCC road, PCC path and interlocking foot path any one and making good with PCC (1:3:6) type C1 for a width of 0.45 metre and a depth of 0.45 metre and length not more than 8 mtr complete all as specified |
| 44 | Material and labour 16 Sqmm 4 Core PVC insulated copper conductor, single core cable including lugs in surface/wall/floor as required area complete all as specified and directed |
| 45 | Material and labour 25 Sqmm 4 Core PVC insulated copper conductor, single core cable including lugs in surface/wall/floor as required area complete all as specified and directed |
| 46 | Taking down old UNSV any type changeover switch and S&F On -load changeover switches 415V, 50 Hz 63Amps 4 Pole on existing pole/wall/ Panel Board complete all as specified. Make : Havells cat No IHCNFO0063 equivalent |
| 47 | Taking down old UNSV any type changeover switch and S&F On -load changeover switches 415V, 50 Hz 100Amps 4 Pole on existing pole/wall/ Panel Board complete all as specified. Make : Havells cat No IHCNFO0100 equivalent |
| 48 | Taking down old UNSV any type changeover switch and S&F On -load changeover switches 415V, 50 Hz 200Amps 4 Pole on existing pole/wall/ Panel Board complete all as specified. Make : Havells cat No IHCNFO0200equivalent |
| 49 | S&F LED street light fittings 70 watts 6000K new generation energy saving & environment friendly long life versatile pressure die cast aluminium with Toughened glass in the front & IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessories with existing highmast/building/pole light fitting in and including reqd three core copper conductor complete taking out existing UNSV old one complete all as specified and as directed. Make: Philips Cat No. BRP501 LED098 CW R3C PSU S1 / Bajaj Cat No.ZELA P 86L WH PO TG SD J/ Wipro Cat No. LR09-781-XXX-57-XX / Havells Cat No. ENDURA SUNDOWN SL72WLED765PASYBOTG |
| 50 | S&F LED street light fittings 90 watts 6000K new generation energy saving & environment friendly long life versatile pressure die cast aluminium with Toughened glass in the front & IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessories with existing highmast/building/pole light fitting in and including reqd three core copper conductor complete taking out existing UNSV old one complete all as specified and as directed. Make: Philips Cat No. BRP502 LED126 CW R3C PSU S1 / Wipro Cat No. LR09-102-XXX-57-XX / Orient Cat No. LSFS-90-C-HL |
| 51 | S&F LED street light fittings 120 watts 6000K new generation energy saving & environment friendly long life versatile pressure die cast aluminium with Toughened glass in the front & IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessorieswith existing highmast/building/pole light fitting in and including reqd three core copper conductor complete taking out existing UNSV old one complete all as specified and as directed. Make: Philips Cat No. BRP503 LED168 CW R3C PSU S1 / Wipro Cat No. LR09-132-XXX-57-XX / Orient Cat No. LSFS-120-C-HL |
| 52 | S&F LED Flood Light fittings 80 watts 6000K new generation energy saving & environment friendly long life versatile pressure die cast aluminium with IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessories with existing highmast/building/pole light fitting in and including reqd three core copper conductor complete taking out existing UNSV old one complete all as specified and as directed. Make : Havells Cat No: JETA LEGANZAFLS80WLED757P60DTOTG / Crompton Cat No. LFL-80-CDL/ 60-HPM / Bajaj Cat No. GLEAM-XT F 96L WH NB-A3 PC SD |
| 53 | S&F LED Flood Light fittings 120 watts 6000K new generation energy saving & environment friendly long life versatile pressure die cast aluminium with IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessories with existing highmast/building/pole light fitting in and including reqd three core copper conductor complete taking out existing UNSV old one complete all as specified and as directed. Make : Havells Cat No. JETALEGANZAFLS120WLED757P60DTOTG / Crompton Cat No. CFS-504-120-57-60D-SL-GL-NSG / Wipro Cat No. LF40-132-060-57-XX / Bajaj Cat No. GLEAM-XT F 144L WH NB-A3 PC SD |
| 54 | Supply installation, testing and commissioning of LED bollard 15W light fitting long life LED module complete accessories as recommended by manufacturer suitable for 220/240 volt AC supply with IP 65 protection including necessary connection etc all as specified and as directed. Make : Bajaj :Bajaj TLLUM 15W 30K 80 C3 GW S / Wipro Cat No. LB16-131-XXX-57-08 / Orient Cat No. LLSLBL-10-W |
| 55 | Supply and lay GI tubes, 'light grade' galvanised, with all fittings of bore of tube 50mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed |
| 56 | Supply and lay GI tubes, 'light grade' galvanised, with all fittings of bore of tube 80 mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed |
| 57 | Preparation of old painted surface of electric poles mild steel tubular type 7.5 to 11Mtr long any type/ make/model including writing the MES No with white paint over black band of paint at a level of 1.2 m above ground level on each pole complete all as specified and directed. |
| 58 | M & L for cutting chasing of existing pole foundation PCC/RCC for dressing existing/new LT UG cable and making to good disturbed surfaces with PCC (1:3:6) type C1 complete all as specified and directed. |
| 59 | Taking down / lowering the flood light assembly from high mast light pole by operating motor or by mannualy by operating handle system for repairing / replacing the unsv flood light assembly complete or partially as directed as per site requirement including greasing of gear wheels and steel rope for smooth up and down of light assembly and checking of electric connection to motor system / contacts all as directed. Note: fittings will be paid seprately |
| 60 | Labour only for attending and identifying electric supply compaints of day to day maintenace of existing LT Panels/ LT Cable including connecting electrical accessories/ spares of water supply / Elect supply installations, electrical fitting with lights, short circuits in OTM/Md Accn as per complaint register complete all as specified & directed. Please Enable Macros to View BoQ information |
| 61 | Labour only for attending and identifying electric supply compaints of day to day maintenace of existing LT Panels/ LT Cable including connecting electrical accessories/ spares of water supply / Elect supply installations, electrical fitting with lights, short circuits in OTM/Md Accn as per complaint register complete all as specified & directed. Please Enable Macros to View BoQ information |
