|
| 1 | Demolition of Brick / stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 2 | Demolition of cement concrete of any description & in any position provided for coping/ bed in surface channel/ drain and compacting the demolished PCC for making sub base for manhole/chambers etc complete all as specified and directed. |
| 3 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) in foundation, fillings and mass concrete complete all as specified and directed |
| 4 | M&L for Pre-cast cement concrete block masonry type C1, mix 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc 10cm in width and setting in cement mortar 1:4, complete in walls all as specified and directed. |
| 5 | M&L for Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc. |
| 6 | M&L for rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement all as specified. |
| 7 | M&L PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 8 | Extra for forming fair finished drain or channel up to 45 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc. |
| 9 | Demolition of concrete (reinforced) of any description and in any position all as specified and directed. |
| 10 | M&L for Precast RCC cover slabs type B-1, 1:2:4, set in cm 1:6 (using 20 mm graded stone aggregates) supported on walls beams, landings, balconies, canopies, deck slabs,chajjas and in shelves and the like as man hole cover etc.all as directed. |
| 11 | M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (ennealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 12 | S&F MS Framed work such as Grills, Gratings & Cattle traps etc with ends of bars shouldered and / or riveted, or forged into spikes; Framed guard bars; barred iron doord; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works Confirming to Fe 290 Grade E-165.complete all as specified and as directed. |
| 13 | M & L for Two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth including necessary preparation of surfaces all as specified and as directed. |
| 14 | Excavation in trenches not exc 1.5m wide and not exc 1.50 mtrs in depth for foundations etc and getting out in hard/dense soil complete all as specified & directed. |
| 15 | Taking out and demolition of existing drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 300mm bore complete all as pecified and directed by Engr-in-Charge. |
| 16 | M & L 450 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 17 | M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in bed to drain pipe 450 mm bore including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed. |
| 18 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil. |
| 19 | Removing excavated material etc.to a distance of 5km outside MOD land / Unit land including loading,unloading and stacking at the destination. |
| 20 | M & L for Removing building materials etc. (other than spoil) to a distance of 5km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed. |
| 21 | S&F of 50mm bore High density polyethylene pipe of pressure rating 6Kgf/Sqcm as in weep holes |
| 22 | M&L for 75 mm thick cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregates) as in floors |
| 23 | M & L for 100 mm thick Cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in floor. Finished even and smooth with out using extra cement.all as specified and as directed. |
| 24 | M&L for Sand filling under floors as in sand cushion for laying paver blocks including water and consolidation complete all as directed. |
| 25 | M & L for Machine pressed pre cast concrete interlocking paver block any shape and size conforming to IS 5658-2006 of 60 mm thickness of grade M-35 with grey cement and pigment all as specified and as directed. Please Enable Macros to View BoQ information |
