|
| 1 | Dismantling single layer Mangalore pattern or similar tiles in roofing |
| 2 | Dismantling single layer Mangalore pattern or similar tiles in roofing portions bedded in lime or cement mortar |
| 3 | Dismantling battens for tiles, shingles etc of any size including tilting fillets, spaced exc.15 cm. |
| 4 | Demolition of cement concrete of any description & in any position not otherwise specifically provided for. |
| 5 | Dismantling Boarding of any description fixed in any position with nails,with or without cover fillets. |
| 6 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings ,any description and in any position, all as directed. |
| 7 | Dismantling timber scantlings 40 sq. cm and over in section, in any position of framed work |
| 8 | Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section |
| 9 | M&L for Clean sawn Second class hard-wood in timber un framed and fixed scantlings |
| 10 | M&L Clean sawn Second class hard-wood in timber un framed and fixed scantlings except timber |
| 11 | M & L II nd class hard wood battens, clean sawn, at 30 cm centres, sectional area exceeding 5 Sqcm but not exceeding 15 Sqcm, fixed with nails all as directed. |
| 12 | Labour only II nd class hard wood battens, clean sawn, at 30 cm centres, sectional area exceeding 5 Sqcm but not exceeding 15 Sqcm, fixed with nails all as directed.( Note serviceable items received Dismantling to be used) |
| 13 | M&L Tiles or slate battens, any size and spacing, prepared and treated all over with two coats of creosote oil |
| 14 | M&L for Tiles or slate battens, any size and spacing, prepared and treated all over with one coats of creosote oil |
| 15 | M&L for Preparing old surfaces of wood and wood based materials, of any description and girth, not otherwise described and treated with, all over with one coats of creosote oil |
| 16 | M & L for II nd class hard wood boarding 20 mm thick, clean, sawn, planned one side with butt joints, fixed with nails in any situation all as directed. |
| 17 | M & L Roof tiles, Mangalore pattern, class 'AA' , inerlocking at side joints, laid dry. |
| 18 | Labour only for Roof tiles, Mangalore pattern, class 'AA' , inerlocking at side joints, laid dry. ( Note serviceable items received Dismantling to be used) |
| 19 | S&F ridge or hip tiles class ‘AA’ to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 complete all as specified. |
| 20 | Labour only for ridge or hip tiles class ‘AA’ to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 complete all as specified.( Note serviceable items received Dismantling to be used) |
| 21 | S&F Galvanised, corrugated mild steel sheeting pf 0.63mm thickness with two corrugations side lap, fixed with L type or J type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275. |
| 22 | S&F galvanized plain mild steel sheeting 0.63 mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zink coating 275 |
| 23 | Fixing only galvanized plain mild steel sheeting 0.63 mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zink coating 275,Except Sheet.( Note serviceable sheets received Dismantling to be used) |
| 24 | M&L PCC (1:3:6) type- C-1 (using 20 mm graded stone aggregate) as in roof kerbs , rounded or chamfered on edges, including necessary form work complete all as specified. |
| 25 | M and L two coat of synthetic enamel painting to wooden surfaces over a coat of pink primer incl preparation of wooden surface, Surfaces of any description, not otherwise descri-bed, over 10cm width or girth |
| 26 | M and L preparation of old wooden surface and applying one coat of synthetic enamel painting to old wooden surfaces including and over a coat of pink primer Surfaces of any description, not otherwise descri-bed, over 10cm width or girth |
| 27 | Material & Labour for applying Two or more coats of 100% Premium Apex roof tile waterproofing guard paint Alkali & fungal resistance, dirt resistance exterior roof tile waterproofing guard paint of required shade (Company Depot Tinted) over and including priming coat of same make as per manufacture's instructions over old surfaces with and including preparing old manglore tile surface on slope roof surface complete all as specified and directed. (Note : Consumption of paint and primer per sqm will be followed as per manufacture's instructions of Asianpaints or equivalent). |
| 28 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 29 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 30 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 31 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 32 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 |
| 33 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle leats or other connecting plates , Fe 410 -W (Gde- E- 250) quality-A |
| 34 | S&F Welded steel wire fabric supplied and fixed complete to wood or steel members Weight per square metre not exc 4 kg |
| 35 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; similar work conforming to Fe.290.Gde-E-165 |
| 36 | S&F wind ties for roof including securing bolts, and similar work conforming to Fe-290 Gde E-165 |
| 37 | M & L two coat of synthetic enamel paint on steel surfaces over one coat of zinc primer including preparation of new steel surfaces exceeding 10 cm width or girth Please Enable Macros to View BoQ information |
| 38 | M & L two coat of synthetic enamel paint on steel surfaces over one coat of zinc primer including preparation of new steel surfaces exceeding 10 cm width or girth Please Enable Macros to View BoQ information |
