|
| 1 | Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where directed, complete all as specified and as directed. |
| 2 | M&L for brick work with sub class 'B' bricks old size straight or curved on plan exc. 6 m mean radius built in cement mortar 1:4, complete all as specified and as directed. |
| 3 | M&L for 15mm thick rendering in CM (1:4) on brick work or concrete surface, finished surface even and smooth without using extra cement including three coats of White wash, complete all as specified and as directed. |
| 4 | M&L for Cement concrete (1:3:6) type D2 40mm graded aggregate as in foundations, filling and mass concrete, complete all as specified and as directed. |
| 5 | M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work, complete all as specified and as directed. |
| 6 | Dismantling posts or struts (wood, steel or R.C.C.) any section,embedded in concrete, masonry, brickwork etc.,including taking out embedded portion and making good disturbed ground, complete all as specified and as directed. |
| 7 | Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed. |
| 8 | Dismantling of Galvanished mild steel two strand barbed wire from existing mild steel or RCC fencing post , complete all as specified and as directed. |
| 9 | Dismantling of chain link fencing wire mesh,any type, any size, complete all as specified and as directed. |
| 10 | S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 11 | S&F galvanized, 2 strand, mild steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. , complete all as specified and as directed.Note: Each line wire to be measured. |
| 12 | Supply only chain link fencing of 3.00 mm to 4.00 mm Dia an aperture 50 mm x 50 mm, complete all as specified and as directed. |
| 13 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire, complete all as specified and as directed. |
| 14 | S&F of mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5cm not exc 10cm and dia of shank 11 to 15mm , complete all as specified and as directed. |
| 15 | M&L for preparation of new steel Surfaces of any description, n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, when unconnected with other painting or when painted in a different tinted , complete all as specified and as directed. |
| 16 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and as directed. |
| 17 | S&F Mild steel TMT Round bars 10mm dia and over cut to length, bent to shape as required including binding with mild steel wire not less than 0.90mm dia (annealed), complete all as specified and as directed. |
| 18 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 19 | S&F steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St-240, complete all as specified and as directed. |
| 20 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 , complete all as specified and as directed. |
| 21 | S&F prepainted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thickness of an colour having tensile strength of 550 Mpa as in outside parking roof covering / outside area covering, clading to wall fixed with self tapping screw including dismantling plain or corrugated steel sheeting,any gauge thickness, complete all as specified and as directed. |
| 22 | S&F prepainted galvalume aluminium zinc coated GI based plain Sheet sheet 0.50 mm thickness of an colour having tensile strength of 550 Mpa as in outside parking roof covering to wall fixed with self tapping screw including dismantling plain or corrugated steel sheeting,any gauge thickness, complete all as specified and as directed. |
| 23 | Materials and labour for rendering 15 mm thick cement plaster, in cement mortar (1:4) on other than fair faces of brick work or concrete surface on walls including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., and applying two coats of Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)over alkali reistant primer over 2 mm thick wall care putty, complete all as specified and as directed. |
| 24 | M&L for complete removal of exisiting treatment, including preparation of plastered or unplastered surfaces of wall and applying two coats of Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)over alkali reistant primer over 2 mm thick wall care putty, complete all as specified and as directed. |
| 25 | M&L for Reinforced cement concrete in Boundary wall lintel and Connected Works type B1 (1:2:4) set in CM 1:4 using 20 mm Graded stone aggregate including necessary form work and demolition of RCC of any description and in any position, complete all as specified and as directed.Note: Reinforcement shall be measured and paid separately. |
| 26 | Taking down shutter and Re-fixing in same opening, shutters of any description obtained from exceeding 1 sqm but n exc 2 Sqm with new chowkat , frame after necessary repair work including easing and adjusting, complete all as specified and as directed. |
| 27 | S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, complete all as specified and as directed. |
| 28 | M&L for Plastering in patches n exc 3.0 Sqm in each patch including taking down cement plaster on Ceiling surface, etc. including raking out joints, hacking for key, scrubbing down with water, Rendering 5mm thick with cement mortar 1:3 and applying two coats of White Washing including preparation, complete all as specified and as directed. |
| 29 | M&L for rendering 15 mm thick cement plaster, in cement mortar (1:4) on other than fair faces of brick work or concrete surface on walls including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., and applying three coats of white wash on walls, complete all as specified and as directed. |
| 30 | M&L for rendering 15 mm thick cement plaster, in cement mortar (1:4) on other than fair faces of brick work or concrete surface on walls including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., and applying three coats of colour wash on walls, complete all as specified and as directed. |
| 31 | Material and labour for preparation of old/new plastered surfaces and applying Nanotechnology based Nano Putty is white cement based product with dispersible polymer and functional additives for application on interior rough plasters to give a smooth surface and will form base for paint finish for interiors of the building, applied in 02 coats of total thickness 1.5mm @ 1.2 kgs/sqm, complete all as specified and as per manufacturer's instructions. |
| 32 | M&L for applying Nano Water Base Hygienic exterior finish elastomeric paint Finish two coats over and above one coat of Nano Water Base Elastomeric Primer not containing toxic materials like Pb, Cr, Zn, biocides/ organocides; having defect-free nano-particles with inhibiting characteristics having bacteria killing rate above 40% and high anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 750 , with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 40 micron DFT of top coat, including scaffolding, surface preparation, cleaning etc,complete as per specification and as directed by the Engineer-in-charge. |
| 33 | M&L for prepration of old plastered or unplastered surfaces and applying two coat of white wash on wall, complete all as specified and as directed. |
| 34 | M&L for prepration of old plastered or unplastered surfaces and applying two coat of Colour wash on wall, complete all as specified and as directed. |
| 35 | M&L for Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled / rammed to a true surface, complete all as specified and as directed. |
| 36 | M&L for Screed Bed or Bedding Layer 15 mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed. |
| 37 | M&L for high endura tiles of red or cream colour, 10 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, complete all as specified and as directed. |
| 38 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, complete all as specified and as directed. |
| 39 | S&F PP-R Polypropylene random copolymer), 3- layers, 75 mm dia, concealed pipes, SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/wall, complete all as specified and as directed. |
| 40 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required , complete all as specified and as directed. |
| 41 | Demolition of cement Concrete unreinforced of any description and in any position not otherwise specifically provided , complete all as specified and as directed. |
| 42 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand , complete all as specified and as directed. |
| 43 | M&L for 75 mm thick plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregate as in sub base , complete all as specified and as directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
