|
| 1 | Demolishing brick work manually / by mechanical means including stacking of servicable materials and disposal of unservicable materials within 50m lead as per direction of E/I. (DSR-2023, 15.7.4) |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50m lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix(i/c equivalent design mix) (DSR-2023, 15.2.1) |
| 3 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50m ( stacks of cleaned brick shall be measured) (DSR-2023, 15.8.3) |
| 4 | Dismantling stone slab flooring laid in cement mortar including stacking of servicable materials and disposal of unservicable materials within 50m lead. (DSR-2023,15.25) |
| 5 | Dismantling steel work manually/by mechanical means in builtup section without dismembering and stacking within 50m lead as per direction of Engineer-In-Incharge. (DSR-2023,15.19) |
| 6 | Earth work in excavation by mechanial means ( Hydraulic Excavator) / manual means in foundation trenches or drain ( not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kind of Soil.(DSR-2023, 2.8.1) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level. 1:4:8 (1 cement : 4 coarse sand(zone-III) : 8 gradded stone aggregate 40mm nominal size) (DSR-2023, 4.1.8) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 gradded stone aggregate 20mm nominal size) (DSR-2023, 5.1.2) |
| 9 | Reinforced cement concrete work in walls ( any thickness) , including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 gradded stone aggregate 20mm nominal size) (DSR-2023, 5.2.2) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footings, basses of columns, etc. for mass concrete. (DSR-2023, 5.9.1) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for:Column, Pillars, piers, Abutments, Posts and Struts. (DSR-2023, 5.9.6) |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girder, bressumers and cantilevers. (DSR-2023, 5.9.5) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR-2023, 5.22.6) |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-2023, 6.1.2) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-2023, 6.4.2) |
| 16 | 15mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement : 4 coarse sand) (DSR-2023, 13.5.1) |
| 17 | Providing and applying White cement bassed putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-2023, 13.80) |
| 18 | Finishing Wall with water proofing cement paint of required shade: New Work ( Two or more coats applied @ 3.84kg/10sqm) (DSR-2023, 13.44.1) |
| 19 | Surface dressing of the ground including removing vegitation and inequalities not exceeding 15cm deep and removal of rubbish, lead upto 50m and lift upto 1.5m. (DSR-2023, 2.28.1) |
| 20 | Filling available excavated earth in trenches, plinth, sides of foundations etc. in layer not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (DSR-2023, 2.25) |
| 21 | Construction of granular sub-base by providing close graded material confirming to specification, mixing in a mechanical mix plant at OMC, carriage of mixed material by tipper to work site, for all leads and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to acheived the desired density, complete as per specifications and direction of Engineer-In-charge. With materil confirming to Grade-II ( size range 53mm to 0.075mm) having CBR Value-25 (DSR-2023, 16.78.2) |
| 22 | Providing and laying factory made chamfered edge Cement Concrete paver block in footpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & shape/sizes, made by table vibratory method using PU mould, laid in required colour & patteren over 50mm thick compacted bed of sand, compacting and proper embedding/laying of interlocking paver block into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joint with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping etc. sand. complete all as per direction of Engineer-In-charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. (DSR-2023, 16.91.1) |
| 23 | 40mm thick fine dressed stone flooring over 20mm thick base cement mortar 1:5 (1 cement : 5 coarse sand ), including pointing with cement mortar 1:2 (1 cement : 2 coarse sand ) with an admixture of pigment to match the shade of stone. Red Sand Stone (DSR-2023, 11.29.1) |
| 24 | Fixing of gate including all labour Tools & plants and including bottom etc complete. |
| 25 | Steel work welded in builtup section/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usingstructural steel etc. as required In grating, frames, guard bar, ladder, railing, brackets, gates and similar works. (DSR-2023, 10.25.2) |
| 26 | Steel work in builtup tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes (DSR-2023, 10.16.2) |
| 27 | Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (DSR-2023, 13.62.1) |
| 28 | Providing and fixing TATA Blue Scope roof sheet for making Covered pathway. (Rate Analysis Enclosed) |
| 29 | P/Fixing Pre- Coloured Tata Blue Scope Profiled Ridge width 1.0 mt. including all Labour, Materials T & P to Complete the work. (Rate Analysis Enclosed) |
| 30 | Providing and placing Concrete bench 3 seater. (CMR) |
| 31 | Providing and placing blue and green plastic dustbin set for park (CMR) |
| 32 | Supply and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complte. (DSR-2023, 2.27) |
| 33 | Grassing with Doob grass including watering and maintenance of the lawn for 30days or more till the grass forms a thick lawns, free from weeds lift for mowing including supply good earth, if needed ( the grass and good earth shall be paid seperatly. In row 5cm apart in both direction. (DSR-2020, 2.10.1).Horticulture & Landscaping. |
| 34 | Brick edging laid length wise with half brick depth including excavation, refilling and disposal of surplus earth lead upto 50m. With common burnt clay F.P.S. (non modular ) bricks of class designation 7.5. (DSR-2023,16.8.1). |
| 35 | Installation and commisioning of High Mast of Tubular Steel pole (200mm dia. ) of 16m with 8 no. of LED luminaries per pole of 200 Watt ( makeHavells, Philips, Bajaj, Crompton or equivalent) ) including cable of cross section 2.5 sq.mm. of copper conductor material, all civil work and all accesories complete all as per make and design approved by the Engineer- in - Charge. |
| 36 | 16sqm PVC insulated and PVC sheated / X.L.P.E power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required with 32mm conduit covering. (make- havells, H.P.L, finolex , polycab). |
| 37 | Supply & fixing of 7mtr. M.S Octagonal ISI approved brand conforming IS Supply of 7 mtr. M.S Octagonal hot-dip Galvanized with average coating thickness of minimum 70 micron conforming to IS 875 with Braket single arm of G.I heavy duty pipe with minimum 1000mm long, bent at an angle of 120 degree, with necessary holding brackets, hold fasts etc. make Bajaj, Utkarsh, Crompton or equivalent. including making of appropriate RCC foundation of size 450x450 mm for the erection of octagonal pole. |
| 38 | Supply and Providing of LED street light 150 watt luminaire conformity (make- Havells, Philips, Bajaj, Crompton or equivalent )all as per make and design approved by the Engineer- in - Charge. |
| 39 | S.I.T.C of outdoor LED Decorative Pole Drop Lighting Pattern of 3 m height including making suitable R.C.C Foundation , copmplete in all aspect as per the pattern & Design approved by th Engineer-in- charge Please Enable Macros to View BoQ information |
