|
| 1 | M&L for one coat of synmthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified. and as directed. |
| 2 | M&L for preparation of old painted NTP/CGI/PGI/or other steel roof/wall surfaces, eaves and gutters etc. exc 10 cm width or girth and applying one coat of synthetic enamel paint of any approved tint incl making camouflage pattern by mechanical mean as approved by Engr-in-charge complete all as specified. |
| 3 | Demolition of exisiting damaged stone/Brick/ Concrete Block masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engineer-In- Charge |
| 4 | M&L for Pre-cast cement concrete block 1:3:6 type C1 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed. |
| 5 | Material & labour for random rubble stone masonary , uncoursed well bounded, bedded and soilidly hearted in cement mortar (1:4) completed all specified and directed by Engineer-in-Charge. |
| 6 | Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed. |
| 7 | M & L for Rendering or plastering 15 mm thick cement mortar (1:6) on fair faces of stone masonary or concrete block wall surfaces, complete all as specified and directed. |
| 8 | M&L rough cast plaster including 15 mm thick rendering in cement mortar 1:3 on brick work or concrete surface all as specified in SSR Part -1 clause 14.22 complete all as specified & directed. Note : Rough cast plaster finish shall be as follow :- After applying the under coat in cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggreagte (Which is generally of size between 6mm to 12mm depanding on the texture required mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure the larger aggregate are throughly covered. |
| 9 | M&L for one coat of cement base paint on old plastered surfaces of walls including preparation of surfaces by brooming or by steel wire brushing, complete all as specified and directed. |
| 10 | M&L for one coat of synmthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 11 | M&L for preparation of old asbestos cement or plastered old painted surfaces as in ceiling and applying one coat of synthetic enamel paint of approved tint complete all as specified. |
| 12 | M&L for cleaning and removing all scale and dirt of PVC tank by emtying drying, cleaning by scrubbing the dust with wire brush from tank by removing internal and outlet pipe and refixing inlet and outlet pipe in the same position (capacity of tanks exc 500 litres and n.exc. 1000 litres) complete all as specified and directed. |
| 13 | All as per item No. 12 here-in-before but exc 250 litres and n.exc 500 litres -do- |
| 14 | S&F 3 mm Sheet glass, ordinary quality and glazing with oil putty in steel window frame etc complete including hacking out old broken glass (any thickness, size, quality or description) complete all as specifed and as directed. |
| 15 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in repair complete all as specifed and as directed |
| 16 | M&L two coats of 100% premium emulsion acrylic paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance , dirt resisitance exterior paint of approved shade/tint(Company depot tinted), with silicon additives @1.43 Litre/10 Sqm over and including priming coat of exterior primer applied, on newly plastered surfaces of walls including preparation of surfaces complete all as specified & directed. |
| 17 | M&L one coat of 100% premium emulsion acrylic paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004 , alkali and fungal resistance , dirt resisitance exterior paint of approved shade/tint(Company depot tinted), with silicon additives @1.43 Litre/10 Sqm over and including priming coat of exterior primer applied, on complete removal of existing treatment of old plastered walls including preparation of surfaces complete all as specified & directed. |
| 18 | Taking down barbed wire fixed in any position complete all as specified and directed by Engr-in-Charge. |
| 19 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed by Engr-in-Charge. |
| 20 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 21 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 22 | Excavation in hard/dense soil in post holes (or similar holes) each n exc 0.5 cum , getting out and removing surplus soil to a distance n exc 50 m and making good complate all as specified and directed. |
| 23 | M&L for PCC 1:4:8 type C2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engineer-In- Charge. |
| 24 | M&L mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complate all as specified and directed. |
| 25 | S & F mild steel screw bolts ( machine made ) with hexagonal or square heads at one end & screwed the other , or screwed both ends ,each screwed end to be fitted with washer and one hexagonal or square nuts for 5 to 8 mm neck dia and length exc. 5 Cm and n.exc. 10 Cm complete all as directed and specified. |
| 26 | M & L for Mild steel round bars 10mm dia and over, cut to length, as fixed in chain link fencing along tha length as required complate all as specified and directed. |
| 27 | Supply only Mild steel galvanised chain link fencing, n.exc 4 kg/sqm, including lines wires, any mesh, size & type as directed to any type of standard rails etc including provn of binding wire, complete all as specified and as directed (Note : - Mild steel round bars as in line wires for chain link fencing shall be measured and paid seperately as supply only) |
| 28 | Fixing only Mild steel galvanised chain link fencing including including lines wires, any mesh, size & type as directed to any type of standard rails etc including provn of binding wire complete all as specified and as directed |
| 29 | S&F galvanised 2 strand steel barbed wire 2.24 mm dia barberd with 2 mm dia bar at 75mm spacings & straining & fixing to any type of standerd rails straining bolts, including securing or tying at crossig with and provision of galvanised mild steel wire staples or steel pins etc as directed each line of wire to be measured. |
| 30 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
