|
| 1 | STEEL FURNITURE : Taking down worned out components of the following steel furniture, S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge |
| 2 | ALMIRAH LARGE STEEL WITH SHELVES (FD-351/1031) |
| 3 | Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side after preparation surfaces |
| 4 | Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 5 | Side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 6 | Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 7 | Shelves made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 8 | Six Levers lock Make : Godrej/Harrison/Link with duplicate keys |
| 9 | Three way Locking Device of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer |
| 10 | Chromium plated Steel Handle 125mm |
| 11 | Chromium plated MS Key plate fixed with screw and nuts |
| 12 | Leg made of 1.6 mm thick MS sheet with Gas welding incl a coat of red oxide primer |
| 13 | Almirah Small/ Medium steel (FD-350 /1032/243) |
| 14 | Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 15 | Shelves made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 16 | Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 17 | Side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 18 | Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 19 | Six Levers lock Make : Godrej/Harrison/Link with duplicate keys |
| 20 | Three way Locking Device of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer |
| 21 | Chromium plated Steel Handle 125mm |
| 22 | Chromium plated MS Key plate fixed with screw and nuts |
| 23 | Leg made of 1.0 mm thick MS sheet with Gas welding incl a coat of red oxide primer |
| 24 | Locker Bedside Steel ( FD-257/1029) |
| 25 | Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 26 | Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 27 | Side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 28 | Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 29 | Shelves made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side |
| 30 | 125mm Steel Handle 'D' type for Locker Bedside steel |
| 31 | Leg made of 1.0 mm thick MS sheet with Gas welding incl a coat of red oxide primer |
| 32 | 75mm haps & stapple fixed with rivets of locker steel |
| 33 | Hanging Rod of 1.6mm thick chromium plated MS Rod |
| 34 | TABLE DINING OR's ( FD-165(M) ) |
| 35 | Top of 18/19 mm thick particle board of size 1900 mm x 685 mm covered with aluminium sheet 22 guage on top complete all as specified and fixed with frame with machine screws, as directed by Engineer-in-Charge |
| 36 | Rubber shoe to legs |
| 37 | CHAIR CB STEEL WITH ARMS/WITHOUT ARMS ( FD-75(M) |
| 38 | Seat frame of Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish incl weaving with 2 mm wide half round plastic cane with Godrej pattern & border with 3 mm wide plastic cane superior quality as shown in drawing |
| 39 | All as per item No 6.01 here-in-before but back frame |
| 40 | All as per item No 6.01 here-in-before but Seat frame for Chair CB Steel without Arms |
| 41 | All as per item No 6.01 here-in-before but back frame for Chair CB Steel without Arms |
| 42 | Arms rest for Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish |
| 43 | PVC cap at top of the frame of the chair (02 Nos to each chair) |
| 44 | PVC Shoe at bottom of the frame of the Chairs (04 Nos to each chair) |
| 45 | TABLE OFFICE CLERK/TYPIST STEEL (FD-84(M)/1004/FD-1006) |
| 46 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 47 | Drawer made of 22 gauge MS sheet with a coat of red oxide primer |
| 48 | Six levers Lock of Godrej/Harrison with duplicate keys. |
| 49 | PVC Shoe at bottom of the leg of the Table |
| 50 | TABLE OFFICE OFFICER STEEL (FD-84(M)/1003) |
| 51 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 52 | Drawer made of 22 gauge MS sheet with a coat of red oxide primer |
| 53 | Six levers Lock of Godrej/Harrison with duplicate keys. |
| 54 | PVC Shoe at bottom of the leg of the Table |
| 55 | TABLE 3' x 2' STEEL WITH DRAWER ( FD-283/1008) |
| 56 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 57 | Drawer made of 22 gauge MS sheet with a coat of red oxide primer |
| 58 | PVC Shoe at bottom of the leg of the Table |
| 59 | TABLE 3' x 3' STEEL (FD-291/1009) |
| 60 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 61 | PVC Shoe at bottom of the leg of the Table |
| 62 | CHARPOY IP WITH PLYTOP (FD/MAP-II/01) |
| 63 | 12mm thick ply wood top BWR Grade ISI Marked of size 1950mm x 900mm (Single piece) to be fixed to frame with MS nuts & screws.Note:- Make of plywood Century/Archid ply/ Kitply or equivalent |
| 64 | PVC Shoe at bottom of the leg of the Charpoy |
| 65 | Charpoy GI Pipe with Plytop: (FD-220) |
| 66 | 3 way Galvanized Iron Elbow 32 mm dia. Note weight of each elbow shall not be less than 450 grams |
| 67 | Galvanized iron check nut 32 mm dia. Note :- weight of each check nut shall not be less than 125 grams |
| 68 | Long rail of 32 mm dia galvanized iron pipe medium grade incl threading at both ends as directed |
| 69 | Short rail converted out of retrieved Long rail, Item No 12.03 above incl cutting, threading as required and directed |
| 70 | Leg converted out of retrieved Short rail, Item No 12.04 above incl cutting, threading as required and and directed |
| 71 | Provn of Two Nos MS cleat as shown on drg to hold the MNF set and one MS plate at the bottom to each Leg converted out of retrieved Short rail |
| 72 | 12mm thick ply wood top BWR Grade ISI Marked of size 1980mm x 900mm (Single piece).Note:- Make of plywood Century/Archid ply/ Kitply or equivalent |
| 73 | Replacement of existing rusted/corrosion flat iron strip with new flat iron strip of size 50mmx50mmx 5mm with appropriate size headless bolt and nut on frame of charpoy GI pipe. Rest all as directed by Engr-in-Charge. |
| 74 | CHAIR WRITING MAP (FD/E6/MAP/12) |
| 75 | Replacement of complete seat and back with new moulded foam cushioned 40 density as shape and size, covered with tapestry cloth as approved along with PVC liping all round, as directed, Note- Cost of tapestry cloth not less than Rs 450/- RM. |
| 76 | Hand rest one piece made of black integral skin,reinforced with MS insert it. |
| 77 | Chair Visitor of all models (TP) |
| 78 | Repair to chair visitor with cushion of all models, including repair/replacement of seat, and back, welding of broken joints of frame of chair visitor to make the chair serviceable all as directed. |
| 79 | Hand rest one piece made of black integral skin,reinforced with MS insert it. |
| 80 | BED HARD STEEL( FD/E6/MAP/08(R)) |
| 81 | 12mm thick ply wood top of size 1950mm x 900mm (Single piece) BWR Grade ISI Mark with MS screws, complete all as specified |
| 82 | 18mm thick prelaminated MDF board at head side of the bed as specified |
| 83 | 18mm thick prelaminated MDF board at foot side of the bed as specified |
| 84 | PVC shoes at the bottom of leg. |
| 85 | TABLE COMPUTER (FD/E6/MAP/03)/TP |
| 86 | Top of 18mm thick pre-laminated particle board incl PVC lipping all around the top |
| 87 | Drawer of 18 mm thick pre-laminated particle board fixed with telescopic channel |
| 88 | Keyboard tray of 18 mm thick pre-laminated particle board fixed with telescopic channel . |
| 89 | PVC shoes at the bottom of leg. |
| 90 | Chair Revolving Steel high back (TP) |
| 91 | Replacement of complete seat with new moulded foam cushioned 40 density as shape and size and fixed over 12mm thick hot pressed plywood, covered with synthetic leatherate as approved and as directed by Engineer-in-charge |
| 92 | All as per item No 17.01 here-in-before but for back frame |
| 93 | Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified |
| 94 | Pedestal assembly complete |
| 95 | Twin wheel coasters press fitted at the bottom of leg. |
| 96 | Hydraulic system |
| 97 | Chair Verandah (FD-256, 259, 359) |
| 98 | Taking out old U/S cane/newar and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, painting two coats with white synthetic enamel paint and recanning seat and back with 4 mm wide half round white plastic cane of superior quality as directed by Engineer-in-Charge |
| 99 | PVC/Rubber shoes as per sample approved |
| 100 | Cutting down wornout portion of MS Tube of the steel frame of Tables and replace with 25mm/32mm dia 1.6mm wall thickness MS tube in one piece to bring into original size as per drawing duly welding , applying of red oxide primer after preparation of surface. Upto 300mm long piece will be counted as one. |
| 101 | CHAIR VERANDAH (FD/MAP-II/06)Taking down unserviceable PVC seat from chair verandah and re-fixing with best quality new PVC Seat 4 mm thick and PVC edges 20mm folded towards back and weight not less than 1.85 Kg and grooves 90x10mm 10 Nos, on seat &back including applying one coat of white synthetic enamel paint of superior quality to chairs as per drawings all as specified and as directed by Engineer-in-Charge. |
| 102 | All as per item No 19.00 here-in-before but for PVC Back |
| 103 | CHAIR COMPUTER (FD/E6/MAP/01) |
| 104 | Replacement of complete seat and back with new moulded foam cushioned 40mm density as shape and size, covered with tapestry cloth as approved along with PVC liping all round, as directed, Note- Cost of tapestry cloth not less than Rs 450/- RM. |
| 105 | Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified |
| 106 | Pedestal assembly complete |
| 107 | Twin wheel coasters press fitted at the bottom of leg. |
| 108 | Hydraulic system |
| 109 | Rack Shoe Steel (FD/E6/MAP/08(R) |
| 110 | MS Pipe of 25mm dia for leg frame by welding |
| 111 | MS Jali as shown on drawing |
| 112 | Teapoy Verandah FD-255/(FD/E6/MAP/12) |
| 113 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 114 | PVC Shoe at bottom of the leg |
| 115 | Painting of the following furniture items with two coat of synthetic enamel paint (colour as approved by Engineer-in-Charge) after preparation of surfaces :- |
| 116 | Almirah Steel Large with Shelves, FD-351/1031 |
| 117 | Almirah Small/medium steel (FD-350 /1032/243) |
| 118 | Locker Bedside Steel ( FD-257/1029) |
| 119 | Table Dining OR (FD-165(M) |
| 120 | Chair CB steel with arms/ without arms ( FD-75(M) ) |
| 121 | Table office ckerk steel (FD-84(M)/1004) |
| 122 | Table (900x600x760)mm steel with drawer (FD-283/1008 |
| 123 | Table 3'x3' steel (FD-291/1009) |
| 124 | Table officer officer steel (FD-84(M)/FD-1003) |
| 125 | Book Shelf open steel large (FD-69(M) |
| 126 | Book Shelf open steel Small (FD-69(M) |
| 127 | Charpoy IP with plytop (FD/MAP-II/01) |
| 128 | Almirah Steel Large 1/2 H 1/2 SH (MAP) |
| 129 | Chair writing MAP(FD/E6/MAP/12 |
| 130 | Bed Hard FD/E6/MAP/08® |
| 131 | Table computer FD/E6/MAP/03 |
| 132 | Locker steel 4 units (FD-127(M) |
| 133 | Rack six tier steel (FD-1038) |
| 134 | Rack three tier steel (FD-1023) |
| 135 | Teapoy Verandah (FD-255) Please Enable Macros to View BoQ information |
