|
| 1 | CRANKCASE |
| 2 | CRANKCASE BARE HA-2, LUB AND N/L / /as per schedule |
| 3 | STUD M20X2.5X146/50as per schedule |
| 4 | NUT LOCK HEX M20X2.5 / EN-3A / (9990674050)as per schedule |
| 5 | NUT HEX PLAIN M20X2.5 / /as per schedule |
| 6 | BEARING BUSH (MAIN);2/4/6 CYLINDER / WHITE METAL /as per schedule |
| 7 | WASHER THRUST 135DX111DX8.6 (PB4C) CRANKSHAFT //as per schedule |
| 8 | PIN DOWEL 10DX80 / EN-43 /as per schedule |
| 9 | BEARING BIG END F/CONN ROD / COPPER ;LEAD /as per schedule |
| 10 | GASKET 415X400X0.3 FOR SIDE COVER AND CRANKCASE/ PAPER / HAas per schedule |
| 11 | GASKET 435X340X0.3 BETWEEN CRANKCASE AND DISTANCE PIECE F/2-4-6 CYLINDERas per schedule |
| 12 | GASKET 696X621X0.5 BETWEEN CRANKCAS E AND TOP COVER FOR 2 CYLINDER / PAPERas per schedule |
| 13 | GASKET INSPECTION COVER; 275 DX195 DX2 / KL /as per schedule |
| 14 | BOLT HEX HEAD M10X1.5X20/20 / GRADE 8.8,IS:1367 /as per schedule |
| 15 | STUD M16X2X40/35 / / (9990370350)as per schedule |
| 16 | RING O 30.8X3.6 DEFLECTOR N/L / S ILICONE RUBBER / HAas per schedule |
| 17 | ASSEMBLY SET OF SCRAPER RING (BRONZE)as per schedule |
| 18 | GASKET 110X66X0.5 FOR COVER SCRAPPE R RING / PAPER /as per schedule |
| 19 | GUDGEON PIN FOR PISTON;2/4/6 CYLIND ER / AISI-3115 / HAas per schedule |
| 20 | BUSH FOR SMALL END 50DX40DX54.5 FOR CONNECTING ROD / CAIRO BRONZE / HAas per schedule |
| 21 | CIRCLIP INTERNAL 40x1.75N / IS:3075 /as per schedule |
| 22 | ROD CONNECTING; BODY AND CAP / 080M40 BS 970:P / 2- 4-6 CYLINDERas per schedule |
| 23 | CRANKSHAFT 2 CYLINDER / SGI / HAas per schedule |
| 24 | GUIDE CROSSHEAD / / HA 2-4-6 CYLIN DERas per schedule |
| 25 | CROSS HEAD 2/4/6 CYLINDER / (BS 278 9 ) SNG / HAas per schedule |
| 26 | ASSLY OF STUD TAPER MALE COUP, R1/4\\", LIGHTas per schedule |
| 27 | ASSLY OF STUD TAPER MALE COUP, R1/4\\", HEAVYas per schedule |
| 28 | GASKET 68X50X1;BETWEEN SECONDARY OIL FILTER AND SUPPORT(PUROLATOR)as per schedule |
| 29 | GASKET 96X40X2; OIL COLLECTOR PIPE / KL /as per schedule |
| 30 | OIL PIPING ITEMS KIT ('HA2' SERIES COMPRESSORS)as per schedule |
| 31 | PLATE TOP FOR CRANKCASE / CI / HAas per schedule |
| 32 | CYLINDER / PISTON 310 DIA |
| 33 | STUD M16X2X65/35 / EN-3 / (9990371150)as per schedule |
| 34 | NUT HEX PLAIN M16X2 /as per schedule |
| 35 | COVER FRONT END 310 DIA (BODY PORT ION ) / CI /as per schedule |
| 36 | STUD M10X1.5X32/25 / / (9990363550)as per schedule |
| 37 | RING SUPPORT (CARRIER BUSH) FOR PIS TON N/L / EN-58/as per schedule |
| 38 | BOX STUFFING N/L,2/4 CYLINDER / CI / HAas per schedule |
| 39 | PLATE INTERMEDIATE FOR 310D CYLINDE R N/L /as per schedule |
| 40 | RING O 30.8X3.6 DEFLECTOR N/L / S ILICONE RUBBER / HAas per schedule |
| 41 | CYLINDER 310 DIA LP N/L / CI;BS-145 2 GR-2 / HA 2/4 CYLINDERas per schedule |
| 42 | S/A PISTON 310D, NON LUB / AL /as per schedule |
| 43 | RING BEARING PISTON 310D N/L / TEFL ON /as per schedule |
| 44 | RING SEALING PISTON 310D N/L / TEFL ON /as per schedule |
| 45 | NUT BLOCKING M30X3.5FOR PISTON ROD N/L / EN-56 / HAas per schedule |
| 46 | ROD PISTON 54DX828,N/L / EN-8B OR A ISI-C1034 / HA-2-4- 6 CYLINDERas per schedule |
| 47 | NUT HEX M30X3.5 FOR PISTON ROD LUB AND N/L / EN-3 / HAas per schedule |
| 48 | GASKET 245X180X0.3 BET DISTANCE PIECE AND INT. PLATE; 2-4-6 CYLINDERas per schedule |
| 49 | GASKET 470X406X2; FRONT END COVER 3 10 D / KL /as per schedule |
| 50 | GASKET 112X2(OVEL) FOR SUCTION FILT ER / KL / HAas per schedule |
| 51 | GASKET INSPECTION COVER; 275 DX195 DX2 / KL /as per schedule |
| 52 | GASKET 140X78X2 FOR SUCTION SIDE OF HP CYLINDER F/2-4-6 CYLINDER / KLas per schedule |
| 53 | PACKING GLAND RING (P.T.F.E), M49X3 2X8as per schedule |
| 54 | RING RETAINING FOR 2-4 CYLINDER N/L / /as per schedule |
| 55 | STUD M10X1.5X50/40 / /as per schedule |
| 56 | NUT HEX PLAIN M10X1.5 / /as per schedule |
| 57 | CYLINDER / PISTON 185 DIA |
| 58 | COVER FRONT END 185 DIA (BODY PORT ION ) / CIas per schedule |
| 59 | GASKET 140X78X2 FOR SUCTION SIDE OF HP CYLINDER F/2-4-6 CYLINDER / KLas per schedule |
| 60 | PLATE INTERMEDIATE 185D CYLINDER(49 X108X28) NON LUB / CI / HAas per schedule |
| 61 | CYLINDER 185 DIA N/L / CI;BS-1452 G R-2 / HA 2/4/6 CYLINDERas per schedule |
| 62 | S/A PISTON 185D NON-LUB HAas per schedule |
| 63 | GASKET FRONT 305 DIA X 244 DIA X 2 AND BACK 180 DIA,185DIA CYLINDER / KLas per schedule |
| 64 | GASKET INSPECTION COVER; 275 DX195 DX2 / KL /as per schedule |
| 65 | NUT LOCK M10X1.5 / EN-3A / (9990663350)as per schedule |
| 66 | RING SEALING PISTON 185D N/L / TEFL ON /as per schedule |
| 67 | RING BEARING PISTON 185D N/L / TEFL ON /as per schedule |
| 68 | NUT HEX M30X3.5 FOR PISTON ROD LUB AND N/L / EN-3 / HAas per schedule |
| 69 | NUT HEX M30X3.5 FOR PISTON ROD LUB AND N/L / EN-3 / HAas per schedule |
| 70 | GASKET FRONT 305 DIA X 244 DIA X 2 AND BACK 180 DIA,185DIA CYLINDER / KLas per schedule |
| 71 | STUD M16X2X100/47 / EN-3 /as per schedule |
| 72 | GASKET INSPECTION COVER; 224DX120DX 2 FOR 280D; 310D CYLINDER / KL /as per schedule |
| 73 | LP AND HP SUCTION VALVE ASSLY |
| 74 | VALVE WITH UNLOADING TABLE 105CR11 UPTO PRESS:3KG/CM2G\as per schedule |
| 75 | VALVE ASSEMBLY WITH UNLOADING CR-105-13as per schedule |
| 76 | S/A VALVE SUCTION 105 CR-11 / / KG NTas per schedule |
| 77 | VALVE S/A SUCTION CR-105 HP (CR-13) N/L 2/4 CYL / /as per schedule |
| 78 | PLATE FOR R105 SUCTION AND DELIVERY V ALVE / EN- 56D / KGNT/HATas per schedule |
| 79 | PLATE SPRING FOR R105 SUCTION VALVE / EN-58 /as per schedule |
| 80 | PLATE CUSHION FOR R105 SUCTION AND DE LIVERY VALVE / EN-58 / KGNT/HATas per schedule |
| 81 | RING 118.6X108 FOR DELIVERY VALVE / RUBBER / HAas per schedule |
| 82 | RING 118X111X2 FOR VALVE / CU / HAas per schedule |
| 83 | RING O 29 IDX3.5D / SILICON RUBBER / HAas per schedule |
| 84 | PIN SPLIT 3/32\\"X1-1/4\\"/2.38X31.75 /as per schedule |
| 85 | GUIDE FOR 105 CR VALVE / CI /as per schedule |
| 86 | BOLT HEX HEAD M5X0.8X10/10 / GRADE 8.8;IS-13 /as per schedule |
| 87 | WASHER 20X6.5X1.2 / EN-2 /as per schedule |
| 88 | SPRING FOR NEW DECOMPRESSOR / EN-42 B/43 (CADM /as per schedule |
| 89 | S/A TABLE REGULATING FOR CR-105VALV E / CD-PLTD /as per schedule |
| 90 | PISTON DECOMPRESSOR 35D / EN-56 /as per schedule |
| 91 | CYLINDER DECOMPRESSOR 35 DIA / SS /as per schedule |
| 92 | GRILL PROTECTION FOR SUCTION VALVE / BRASS / KGNTas per schedule |
| 93 | COVER CR105 SUCTION VALVE FOR 2/4/6 CYLINDER / MS; CADMIUM PLA /as per schedule |
| 94 | BELL FOR 105CR SUCTION VALVE;2/4/6 CYLINDER / MS;IS- 1079 CD P / HAas per schedule |
| 95 | LP AND HP DELIVERY VALVE ASSY |
| 96 | S/A VALVE DELIVERY 105 CR-12 N/L / /as per schedule |
| 97 | VALVE S/A CR-105 DELIVERY HP(CR-14) N/L 2/4 CYL / /as per schedule |
| 98 | PLATE FOR R105 SUCTION AND DELIVERY V ALVE / EN- 56D / KGNT/HATas per schedule |
| 99 | PLATE SPRING DELIVERY / EN-58 /as per schedule |
| 100 | COVER DELIVERY VALVE / MS;CADMIUM PLAT /as per schedule |
| 101 | BELL F/ R105 DELIVERY VALVE;2/4/6 CYLINDER / MS;IS- 1079 CD P / HAas per schedule |
| 102 | NUT HEX PLAIN M12X1.5 / /as per schedule |
| 103 | STUD M12X1.5X27/18 / /as per schedule |
| 104 | OTHER SPARES |
| 105 | TUBE BUNDLE FOR INTERCOOLER 94.108.155.00.as per schedule |
| 106 | TUBE BUNDLE FOR AFTERCOOLER 94.108.156.00.as per schedule |
| 107 | GASKET FOR INTER COOLER-2HA2TERT -94.108.155.00as per schedule |
| 108 | GASKET FOR AFTER COOLER -2HA2TERTT- 94.108.156.00as per schedule |
| 109 | O-RING FOR AFTER COOLER -2HA2ERT - 94.108.156.00as per schedule |
| 110 | O-RING FOR INTER COOLER-2HA2TERT- 94.108.155.00as per schedule |
| 111 | S/A FILTER SECONDARY OIL;2/4/6 CYLI NDER / / HAas per schedule |
| 112 | ELEMENT SECONDARY FILTER (NEW DESIG N)as per schedule |
| 113 | ELEMENT WITH FILTER SUB ASSLY 16\\"X1 6\\"X4\\" FOR N/L // HAas per schedule |
| 114 | S/A PUMP OIL;2/4/6 CYLINDER / / HAas per schedule |
| 115 | T FITTING CONNECTOR WITH NUT & FERRUL FOR UNLOADERas per schedule |
| 116 | GASKET 432 SQ.X5 FOR PANEL FILTER 1 6\\" / RUBBER / HAas per schedule |
| 117 | S/A TRAP MOISTURE (SEPARATOR) / / KG/CREPELLEas per schedule |
| 118 | COCK DRAIN DOUBLE END 3/8\\"BSP LEVER TYPE W/0 NUTS NIPPLE / /as per schedule |
| 119 | PIECE FELT FOR MOISTURE TRAP / / A LL COMPRESSORas per schedule |
| 120 | ELEMENT FOR PRIMARY OIL FILTERas per schedule |
| 121 | GLASS SIGHT FOR WATER FLOW INDICATO R 1-1/2\\"BSP (10X115) / /as per schedule |
| 122 | GLASS SIGHT FOR WATER FLOW INDICATO R 1/2\\"BSP (10X85D) / /as per schedule |
| 123 | 24V DC 3/2 WAY SOLONOID VALVEas per schedule |
| 124 | PRESSURE SAFETY VALVE, FIRST STAGE DISCHARGE, 40 NB, 150#, B16.5, SET PRESSURE 3 KG/CM^2Gas per schedule |
| 125 | PRESSURE SAFETY VALVE, SECOND STAGE DISCHARGE,40 NB, 150#, B16.5, SET PRESSURE 9 KG/CM^2G (SP/FB/1045)as per schedule |
| 126 | RAIL SLIDE FOR 120HP MOTOR / CI / H A2/KG-3as per schedule |
| 127 | Model No KES 90-7.5 |
| 128 | AIR OIL SEPARATOR ELEMENT 20 m3/min as per schedule |
| 129 | HOSE ASSEMBLY 1-1/4\\" x 1000 L , ST X 90 as per schedule |
| 130 | PRESSURE TRANSMITTER, 4 TO 20 mA, 8.2 TO 34 V DC, 0 - 16 BAR. as per schedule |
| 131 | Combi Cooler as per schedule |
| 132 | Servo Cylinder as per schedule |
| 133 | \\"K-SMART PREMIUM SCREW COMPRESS OIL 20 LTR PACK\\" as per schedule |
| 134 | Solenoid Valve as per schedule |
| 135 | Controller for KES 90-7.5 as per schedule |
| 136 | Analogue Module, 4 Ch. Universal Analog Voltage/Current/PT100 as per schedule |
| 137 | Communication Port, 1 CH.RS422 serial as per schedule |
| 138 | Hose Assembly, 1-1/4’’X L (ST90), as per schedule |
| 139 | AIR FILTER ASEMBLY as per schedule |
| 140 | SCAVENGE PIPE as per schedule |
| 141 | TEMPERATURE SENSOR (PT-100) as per schedule |
| 142 | MPVL 65 as per schedule |
| 143 | OIL FILTER ELEMENT(150 LPM) as per schedule |
| 144 | Air Filter Element as per schedule |
| 145 | KIT OF GASKET FOR KES 90 as per schedule |
| 146 | HOSE ASSEMBLY 1/4\\" x 1000 L as per schedule |
| 147 | Model No KES 18-7.5 |
| 148 | GASKET (FOR AIR OIL SEPERATOR) as per schedule |
| 149 | GASKET AIR END DELIVERY as per schedule |
| 150 | GASKET (FOR MPVL 32) as per schedule |
| 151 | O' RING ID 36 x 3.55 DIA as per schedule |
| 152 | K Flush Oil ( 5 ltr pack) as per schedule |
| 153 | Controller for KES 18-7.5 as per schedule |
| 154 | Analogue Module, 4 Ch. Universal Analog Voltage/Current/PT100 as per schedule |
| 155 | Communication Port, 1 CH.RS422 serial as per schedule |
| 156 | Air-oil Separator ELEMENTS, XXX CFM AT 7 BAR as per schedule |
| 157 | THERMOSTATIC VALVE ASSEMBLY, ½’ BSP as per schedule Please Enable Macros to View BoQ information |
