|
| 1 | Providing and fixing of Victorian Bench covering area approx. 5’L frame to frame side frame in of heavy duty cast iron which is circular shape at front sitting corner. Seat and rest 59” long total 12 Nos. is of MS rectangular pipe 65x25mm x 16 Gauge complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site.@ Rs. 15000/- Each |
| 2 | Cost of 3KW, three phase energy meter (electricity meter) with complete installation (pursuing of meter file to DHBVN and upto complete installation, whole work is to be done by contractor himself) Work is considered to be completed after complete installation of energy meter and intelligent smart controller.(Paid to contractor but as per DHBVNL rate plus Rs. 1000/- per meter paid to contractor for pursuing and making file charges etc.) |
| 3 | Transportation All items |
| 4 | Providing and fixing of head frame on pole with mounting arrangement of 4 LED flood Light. |
| 5 | Installation charge all items |
| 6 | P/F Chest press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI-pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from roto-moulde. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. |
| 7 | P/F Seated puller is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm and 25mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used |
| 8 | P/F Sky Walker is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The Handle frame is made of 25mm NB “B” Class GI-pipe. Foot Rod is made from 50x50 MS square pipe of 3mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. |
| 9 | P/F Air Walker is made from IS-1239 “B” Class GI-pipe. The bend pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 25mm NB “C” Class GI-pipe. The Leg frame is made of 32mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, |
| 10 | P/F Horse rider is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and connecting rods is made of 25mm NB “C” Class GIpipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick. |
| 11 | P/F Leg press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick |
| 12 | P/F Push-up-Bar is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mmthick. |
| 13 | P/F Sit-up-Board is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. Bench frame is made from 25mm NB “B” Class GI-pipe and MS Perforated Sheet of 2mm thick is welded in bench frame. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mmDia and 10mm thick |
| 14 | P/F Back Extension is made from IS-1239 “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe. The remaining frame is made of 25mm NB “B” Class GI-pipe. Barbell is made from 25mm “B” Class GI-pipe. Weight plates are made from 200mm dia solid MS plate. Closing caps are made from top quality LLDPE Material which is of 2mm thick. Machine is directly grouted in the ground.The nut Bolts used for assembly are made from SS material. |
| 15 | P/F Weight lifter is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe. The remaining frame is made of 25mm NB “B” Class GI-pipe. Barbell is made from 25mm “B” Class GI-pipe. Weight plates are made from 200mm dia solid MS plate. Closing caps are made from top quality LLDPE Material which is of 2mm thick. Machine is directly grouted in the ground. The foundation pipes are embedded in CC stock and painting is done by attractive color spraying after proper surface treatment, the initial coat of primer surface is applied before top coat. The powder coating is done from Polyurethane and Epoxy Powder with 60 to 70 Micron Thickness. |
| 16 | P/F Triple Horizontal Bars are made from “B” Class GI-Pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick/or holepass made in 25x25x3 angle welded on all 4 sides of the pipe bottom. The Handle frame and connecting rods is made of 25mm NB “B” Class GI-pipe. Seat frame is made from 50mm NB “B” Class GI-Pipe. -_ |
| 17 | P/F Rower is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The Handle frame and connecting rods is made of 25mm NB “B” Class GIpipe. Seat frame is made from 50mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm thick. |
| 18 | P/F Cross Trainer is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The handle frame is made 25mm NB “B” Class GI-pipe. Foot rod is of 40mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm thick. |
| 19 | Supply and Laying of underground cable in pipe /existing open/closed trench etc as16 Sq mm to 35 sqmm 2 to 4 Core(This is an approximate quantity. payment will be made as per the actual work done after completion of work on site) |
| 20 | Supply and erection of PVC copper insulated and sheathed 3-core circular flexible wire.size 2.50 sqmm (80/0.20 mm)(This is an approximate quantity. payment will be made as per the actual work done after completion of work on site) |
| 21 | Supply of seasonal flower seedling/sapling of height 6’’ to 12’’ in polybag size of 6’’x 6’’ at site of work well developed, fresh and healthy foliage free from diseases.The list of seasonal plants is as under:-1. `Carnation (double) Lilliput`2. Petunia hybrid3. Antirrhinum Planting time Oct-Nov4. Coleus5. Dahlia (Planting Time Oc-Nov and Flowering Time Dec to March)6. Chrysanthemum7. Ranunculus8. Pansy (Planting Time Aug to Oct and Flowering Time Oct to March)9. Salvia (Planting Time Aug to Oct and Flowering Time Oct to March10. Canna11. Brachycome (Planting time Oct-Nov and Flowering Time Dec-March)12. Calendula (Planting time Oct to Nov)13. Dianthus (Planting Time Aug to Oct Flowering Time Oct to March)14. Gazania (Planting Time Aug to Oct and Flowering Time Oct to March)15. Marigold African and Bonanza (Planting Time Aug and Flowering Time Oct to March)16. Phlox (Planting Time Aug to Oct Flowering Time Oct to March) 17. Verbena (Planting Time Aug to Oct Flowering Time Oct to March)18. Dimorphotheca (Planting Time Aug to Oct Flowering Time Oct to March)19. Poppy Red (Planting Time Aug to Oct Flowering Time Oct to March)20. Nestacium (Planting Time Aug to Oct Flowering Time Oct to March)21. Nemesia (Planting Time Aug to Oct Flowering Time Oct to March)22. Dog flower (Planting Time Aug to Oct Flowering Time Oct to March)23. Geranium (Planting Time Aug to Oct Flowering Time Oct to March)24. Periwinkle (Planting Time Aug- oct)25. Kulpha (Planting Time March)26. Sunflower (Planting Time March)27. Cosmos (Planting Time March)28. Gaillardia (Planting Time March)29. Gomphrena (Planting Time March)30. Zinnia (Planting Time March)31. Kochia (Planting Time March)32. Desi Marigold (Planting Time March)33. Portulaca (Planting Time all month) |
| 22 | Supplying of well-developed timber plants such as Neem, Arjun, Kadamb, Silver Oak, bargad, Peepal and Pilkhan of height 8 to 10 feet, grown in 13`x13` polybags, including loading, unloading, and stacking at site as per direction of Engineer-in-Charge. |
| 23 | 4-Seater See-Saw. i. FRP coated Frame and Structure (Main Frame Material):• Heavy-duty MS pipe (mild steel), ISI grade, FRP coated• Pipe thickness: 3.0 mm • Fulcrum/Base Support:• MS square/round pipe, min. 80 mm OD × 3.0 mm thickness• Pivot support with ball bearing or heavy-duty bush for smooth movement.ii. Dimensions• Overall Length: 3.0 mtr• Height at Seat Level (rest position): 600 – 750 mm• Height at Maximum Tilt: ~1.2 m• Beam Size: 80 mm OD round/rectangular pipe, thickness 3.0 mm.iii. Seats• Material: FRP (Fiber Reinforced Plastic) • Size per seat: 300 mm × 250 mm• Quantity: 4 (two on each side, facing each other)• Backrest (optional): For toddlers, height ~200 mmiv. Handles and Footrest• Handlebar: MS pipe Ø 25–32 mm, height 350–400 mm above seat• Footrest: MS rod/pipe with anti-slip rubber gripv. Load Capacity• Per Seat Capacity: 40–60 kg• Total Safe Load: ~200–240 kgvi. Safety Features• Stoppers at both ends with rubber pads to avoid sudden impact• Rounded edges and smooth powder coating (non-toxic)• Bearing/bushing enclosed for safetyvii. Age Group Suitability• 4–12 years recommended• Supervised use for younger childrenviii. Installation: - Base plates with grouting bolts in RCC foundation (min. 300 × 300 × 450 mm deep footing). Ensure minimum 2 m safe clearance zone around the see-saw |
| 24 | Arch swing: - i. FRP Coated Frame and Structure• Type: Arch frame, single bay (2-seater) • Material: ISI grade MS (mild steel) pipes.• Pipe OD (arch legs): 80 mm (min.) × 3.0 mm thickness• Top cross beam: 80 mm OD MS pipe × 3.0 mm thickness• Arch shape: Radius : 1 mtr (depending on bay width)ii. Dimensions• Height (ground to top beam): 2.6 – 3.0 m (recommended 2.8 m)• Seat clearance from ground (at rest): 350–500 mm• Distance between two swing seats (side-to-side): Minimum 600–750 mmiii. Swing Seats• Material: FRP • Type: Flat seat (for 5–12 yrs)• Size: 400–450 mm × 200–250 mm• Load capacity per seat: 80–120 kgiv. Chains / Ropes• Type: Galvanized / stainless-steel chain with plastic/rubber coating (pinch-free) as desired by Engineer in-charge • Chain thickness: 6–8 mm• Length: 1.6 - 1.8 m (adjustable for seat clearance)• Connection: Heavy-duty D-shackles or clevis connectors with anti-theft nut/bolt.v. Safety Zone and Surfacing• Impact area: At least 2.0 m front and back, 1.75 m side clearance per swing.• Fall height: 1.5 – 1.8 mvi. Load Capacity and Stability• Single bay (2 seats): Total ~200 kg• Multi-bay: Each bay must be independently anchored• Foundation: RCC footing per arch leg, size 300 × 300 × 600 mm depth with anchor boltsvii. Age Group Suitability• Toddlers (2–5 yrs): Bucket seat with harness.• Kids (5–12 yrs): Flat belt/FRP seat |
| 25 | Single Slide: - Single-lane i. FRP Coated Structure and Material• Main frame fabricated from MS (Mild Steel) tubular pipes of minimum 50 mm diameter and 3 mm thickness, conforming to ISI standards.• Supporting legs to be embedded in M-15 grade cement concrete block (1:2:4 mix) of size not less than 450 mm × 450 mm × 600 mm (depth).• Platform frame made of MS angle iron-FRP Coated (40 × 5 mm) 42 MM OD PIPE with chequered sheet/8 mm FRP sheet / for anti-skid surface.ii. Slides• Single slide made of FRP (Fiber Reinforced Plastic) • Length of slide: 2.5 m to 3.0 m (approx.) from top to bottom.• Height of starting platform: 1.80 MTR (approx.) above ground level.iii. Safety Features• Handrails made of MS pipes- FRP coated (25 mm Dia, 2.5 mm thick) provided on both sides of stairs and top platform.• Safety guard/barriers of minimum 600 mm height at the platform to prevent accidental fall.• All sharp edges, welding joints and corners to be properly ground and rounded.iv. Ladder/Stairs• Ladder made of MS pipe-FRP Coated (32 mm dia, 3 mm thick) with non-slip rungs of MS flats (25 mm × 5 mm).• Angle of inclination of ladder approx. 60° for safe climbing.v. Finishing• All MS parts to be treated with anti-rust epoxy primer and FRP coating.• FRP surface to be glossy, UV-resistant and smooth finished.vi. Load Bearing Capacity• Slide should be able to withstand a minimum load of 150 kg at any point without deformation.vii. Standards and Workmanship• The equipment must conform to IS: 9873 (Part I–III) / IS: 6661 / IS: 875 (as applicable) and international playground safety standards.Workmanship should ensure durability, stability, and child safety. |
| 26 | Double Slide:-i. FRP Coated Structure and Material• Main frame fabricated from MS (Mild Steel) tubular pipes of minimum 50 mm diameter and 3 mm thickness, conforming to ISI standards.• Supporting legs to be embedded in M-15 grade cement concrete block (1:2:4 mix) of size not less than 450 mm × 450 mm × 600 mm (depth).• Platform frame made of MS angle iron (40 × 40 × 5 mm) 42 MM OD PIPE with chequered sheet/8 mm FRP sheet / for anti-skid surface.ii. Slides• Double slide made of FRP (Fiber Reinforced Plastic) • Length of slide: 2.5 m to 3.0 m (approx.) from top to bottom.• Width of each sliding chute: 450-500mm MTR.• Height of starting platform: 1.80 mtr (approx.) above ground level.• Both slides should be properly curved and smooth finished to ensure safe sliding.iii. Safety Features• Handrails made of MS pipes- FRP coated (25 mm Dia, 2.5 mm thick) provided on both sides of stairs and top platform.• Safety guard/barriers of minimum 600 mm height at the platform to prevent accidental fall.• All sharp edges, welding joints and corners to be properly ground and rounded.iv. Ladder/Stairs• Ladder made of MS pipe-FRP Coated (32 mm dia, 3 mm thick) with non-slip rungs of MS flats (25 mm × 5 mm).• Angle of inclination of ladder approx. 60° for safe climbing.v. Finishing• All MS parts to be treated with anti-rust epoxy primer and FRP coating.• FRP surface to be glossy, UV-resistant and smooth finished.vi. Load Bearing Capacity• Slide should be able to withstand a minimum load of 150 kg at any point without deformation.vii. Standards and Workmanship• The equipment must conform to IS: 9873 (Part I–III) / IS: 6661 / IS: 875 (as applicable) and international playground safety standards.• Workmanship should ensure durability, stability, and child safety. |
| 27 | Climber :-i. Material FRP coated • Main frame: Mild Steel (MS) pipes of minimum 40 NB / 48 mm outer diameter, thickness 3 mm, conforming to ISI standards.• Climbing elements: High-strength steel pipes, Fasteners: M.S bolts, nuts, and washers with anti-rust coating.ii. Surface Finish• All MS components to be FRP coated with weather-resistant, non-toxic paint.• Welded joints properly ground and treated with anti-corrosive primer before painting or coating.iii. Dimensions (example for arch/net climber, modify as required)• Height: 2.0 – 2.5 meters.• Width: 1.5-2.0 mtr • Safe spacing between climbing bars: 250-350 mm.iv. Safety Features• All edges and corners to be rounded (no sharp edges).• Fall height should comply with IS 9873 (Part 9): Safety Requirements for Playground Equipment.• Rope joints/knots with galvanized clamps and protective sleeves.• Anchoring to be done with RCC foundation blocks (1.5 ft x 1.5 ft x 1.5 ft) using grouted bolts.v. Load Bearing Capacity • Minimum 100 kg per user, tested for at least 250 kg total load.vi. Standards Compliance• IS 9873 (Safety of Toys and Play Equipment).• EN 1176 (International Playground Equipment Safety Standard) where applicable.vii. Installation• Installation as per manufacturer’s guidelines.• RCC foundation cured for minimum 7 days before usage.viii. Maintenance• Annual inspection for structural stability.• Repainting and tightening of nuts/bolts every 12 months. |
| 28 | Six-Seater MGR i. FRP coated Material and Construction:• Main Frame: Made of heavy-duty MS (Mild Steel) pipes/tubes, minimum 48 MM OD PIPE Top and Bottom Plate: MS plates, minimum 3.0 mm thick, precision cut and welded.• Arms: Six FRP coated arms made of MS pipe (minimum 32 mm dia, 2.6 mm thick), equally spaced.• Seating Arrangement: Six ergonomically designed FRP (Fiberglass Reinforced Plastic) seats with back support, UV resistant, weatherproof, and anti-crack finish.• Central Shaft: MS solid shaft of 45-50 mm dia with double ball bearings for smooth rotation.• Bearing Housing: Heavy-duty cast iron/steel housing with dust-proof cover.• Footrest: Provided for each seat, made of MS rod 27 mm dia.ii. Dimensions (Approx.):• Diameter of Ride: 1.8 to 2.0 mm • Seating Capacity: 6 children (age group 5–12 years)• Height: 0.6 m – 0.75 m (from ground level to seat level)iii. Finish• All MS parts to be sandblasted, treated with anti-rust primer, and FRP-coated with multi-color finish.• FRP seats in bright, attractive child-friendly colors.iv. Safety Features• Rounded edges, no sharp corners.• Safe rotating speed due to self-regulated design.• Anti-skid footrest.• Bearing assembly fully covered for child safety.v. Installation:• Foundation with 1:2:4 RCC concrete blocks (minimum 400 × 400 × 600 mm), as per manufacturer’s design.• Installation to be done with proper grouting and alignment. |
| 29 | Multi Play Station: -i. General Structure• The Multi Play Station shall be modular in design and suitable for outdoor use.• Structure shall be designed for 25–30 children at a time, aged 5–12 years.ii. Material• Main Frame with FRP Coated: Mild Steel (MS) tubular sections, minimum 90,75,48,34, mm dia, 2.5 mm thick, FRP coated.• Platforms: Made of FRP (Fiber Reinforced Plastic) with anti-skid design.• Slides: FRP with smooth finish, minimum thickness 6 mm.• Climbing Frames: MS/FRP with anti-slip grips.• Roof/Canopy: FRP with UV-stabilized coating.• Fasteners: Galvanized / PLATING MS BOLT / SS bolts/ with safety caps.iii. Activities/ComponentsCovering Area: 44` L X 22` WIt contains: • FRP Spiral Slide 6mm thick inclined at 5` H - 1 no• FRP Tube Slide inclined at 5’ H - 1 no• FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3` H - 1 no• FRP Wave slide 6mm thick inclined at 5’ H - 1 no• FRP Stair 3mm thick inclined at 3`H-1 no• FRP Platform Hex. Shape 5mm thick in 7` Dia-2 no.• FRP ??n???-2 no.• FRP Diamond shape with MCF wording Engraved on canopy-2 n?.• FRP Fancy Railing Frog and Monkey Shape-4 no.• FRP Walking Bridge 7.5` Long-1 no.• M.S Spring Climber - 1 no.• M.S Zig-Zag Climber - 1 no• M.S Chain Net Climber - 1 no• M.S Climbing Ladder - 1 no• M.S Station in which vertical MS pipe-FRP Coated is of 3 `12 Guage of 1.S.I Mark-2 no• Parent–Child Face-to-Face Swing: - It allows an adult and a child to swing together, facing each other, on a single moving frame- Heavy-duty MS FRP Coated structure, ISI grade, FRP coated for corrosion protection. Pipe OD 75 mm (min.) × 3.0 mm thickness. Approx. L 10’ × W 6’ × H 8.5’. Dual-seat assembly with pivot arms that keep the adult and child seats facing each other. Heavy-duty bearings or self-lubricating bushes for smooth motion. Full-bucket seat with safety belt (infant/toddler) or FRP half-bucket for older children. Enclosed pivot hardware, anti-wrap bearings, rounded edges. Foundation with 1:2:4 RCC concrete blocks (minimum 400 × 400 × 600 mm), as per manufacturer’s design. Installation to be done with proper grouting and alignment-1 no.iv. Dimensions (Indicative – may vary slightly as per design)• Overall, Area: Minimum 44’ L x 22’ W • Platform Height: 4 ft.• Slide Length: 8–10 ft (2.5–3 m).• Tunnel Diameter: Minimum 650 mm.v. Safety Features• No sharp edges, corners rounded.• Safety guardrails (minimum 900 mm high) at all elevated platforms.• Adequate spacing between activities to prevent collision.• All equipment installed over soft ground/rubber flooring/sand bed.vi. Finishing• FRP coating / PU PAINT with non-toxic, lead-free colors.• FRP to be UV-stabilized, weather resistant.• Minimum 2-year warranty against rusting and color fading. |
| 30 | Fire Station Climber: -i. Structure and Material• Main Frame: Heavy-duty MS (Mild Steel) pipes of minimum 48 mm OD, 2.5 mm thick, FRP-coated / PU PAINT for rust resistance.• Platforms and Panels: 3.0 mm thick MS sheet with anti-skid surface, FRP-coated.• Fasteners: PLATING bolts, tamper-proof, with plastic caps.• SEATING: FRP (Fiber Reinforced Plastic) fire-station theme seat for 8 children in bright red with fire station logo.ii. Dimensions• Height: 2.0-2.4 m (depending on design).• Length: Approx. 2.5-3.5 m.• Width: 1.5-2.0 m.• Platform height: 1.2 m – 1.5 m.iii. Components• Fireman’s Pole: Vertical GI/MS pipe of 50 mm OD, FRP-coated.• Bridge (optional): Rope/metal bridge connecting two platforms.• Themed Panels: Fire station decorative FRP panels with cut-outs for windows/doors.• Wheel: 4 wheels, dia: 15-18 inch iv. Safety Features• All edges rounded and smooth for child safety.• Minimum 2 feet clear space around the climber for safety zone.• Compliant with IS 9873 (Part 1, 2 and 3) and EN 1176 safety standards for playground equipment.• No sharp projections or hazardous entrapments.v. Finishing• FRP coating / pu paint non-toxic and weather-resistant.• FRP parts: UV stabilized, fade-resistant, child-safe paints.v. Capacity• Suitable for 6–8 children at a time, age group 5–12 years. |
| 31 | Supply of LED street light 150 Watts fittings other technical parameters are details is attached |
| 32 | Provision of Porta cabin at Entry and Exit of the Transfer station of Size (20 x 10 x 8.5) with provision of Furniture and its transportation complete in all respect |
| 33 | 1. FRP Molded Canopy (Gazebo Hex. Shape) Double Finishing sheet in 18`Diai) 6 Nos. Ornamental Design FRP Molded PillarsFRP hexagonal pillars with base size 195 mm on each side, vertical fitted design, and FRP height of 970 mm, incorporating B-Class M.S. round pipe of size 88 mm diameter x 2.5 mm thickness and 2890 mm height as internal support. The M.S. pipe shall hold FRP molded “Taj” caps, 6 Nos., each of size 260 x 260 x 210 mm height, suitably mounted at appropriate height as per approved design.All pillars shall be properly ground for smooth finish and spray painted with two coats of P.U. paint, comprising:1st Coat: Epoxy Surface Tolerance Primer (INTERSEAL 670HS or equivalent)2nd Coat: PU Finish Paint (INTERTHANE 990 or equivalent) in approved shade.ii) 12 Nos. Spandrels and 6 Nos. FriezesFloral and ornamental decorative combination of spandrels and friezes, suspended between M.S. pillars as per approved design.Spandrel (L-Bracket): Length 420 mm, Height 400 mmFrieze (Top Panel): Height 250 mm and length as per gazebo sizeThe frieze shall be mounted on an M.S. tubular pipe frame of size 50 mm x 25 mm, properly welded to the column pillars at both ends. The complete assembly shall be uniformly ground, spray-primed, and painted with two coats of P.U. paint as follows:1st Coat: Epoxy Surface Tolerance Primer (INTERSEAL 670HS or equivalent)2nd Coat: PU Finish Paint (INTERTHANE 990 or equivalent) in approved shade.iii) 3 Nos. M.S. Rectangular Tube Railing Panels with FrameFloral and ornamental decorative M.S. square pipe side railing panels as per design, having height of 730 mm and length as per gazebo size. Each panel shall be mounted with top and bottom M.S. tubular pipe frame of size 50 mm x 25 mm.The bottom M.S. pipe shall have 2 Nos. M.S. holdfasts of size 40 mm x 40 mm x 250 mm length, welded at the base for anchoring into the ground.All panels shall be properly ground for smooth surface finish, spray-primed, and painted with two coats of P.U. paint, comprising:1st Coat: Epoxy Surface Tolerance Primer (INTERSEAL 670HS or equivalent)2nd Coat: PU Finish Paint (INTERTHANE 990 or equivalent) in approved shade. iv) Top Frame with Double-Finishing FRP Molded RoofThe top frame shall be fabricated from M.S. tubular pipe of size 40 mm x 40 mm, properly welded and ground. The frame shall be mounted with FRP molded sheets of 4 mm thickness, with top and bottom smooth finish (double-finish) for corrosion and weather resistance.Sheets shall be bent to the required profile of 245 mm width on either end and fixed horizontally along the length between column pillars.The roof shall include a central FRP molded diamond shape panel of size 14” x 3 mm thickness for aesthetic enhancement.All FRP sheets shall be securely riveted to the horizontal members, ensuring proper alignment and finish.v) Canopy FlooringProviding and laying Kota stone flooring / tile flooring within the canopy area, as decided and approved by the Engineer-in-Charge, including base preparation, leveling, joint filling, and surface finishing complete in all respects.vi) Additional Facilities• LED light strip fixed inside the canopy for ambient lighting.• 1 No. ceiling fan inside the canopy, including complete wiring and accessories.• FRP Bollard Light, approximately 700 mm height and 200 mm x 200 mm section, with UV-stabilized gel-coat finish and 9W warm-white/white LED, including complete wiring using 3-core XLPE armored cable in HDPE conduit and IP65 junction box. Electrical safety to include MCB, testing, and commissioning complete in all respects.• Ornamental green hedge, 18 inches wide, developed around the canopy boundary to enhance aesthetics and promote a green environment. Post-greening maintenance shall rest with the department, and the contractor shall bear no liability for upkeep or maintenance of greenery. The scope includes complete fabrication, transportation, on-site installation, and commissioning with all necessary materials, labor, and accessories and to be completed as directed by the Engineer-in-Charge. |
| 34 | Beautification of undeveloped Park in Village Ranhera khera Sector-25, Opp. Imperial Company Ward No. 01 Devision-I, Faridabad. Please Enable Macros to View BoQ information |
