Tender For Annual Maintenance Estimate Of Master Water Supply Rewari, Providing And Fixing Of Chowkhat, Flush Door And Other Wood Work, Plastering Work , New Paint Work In Filteration Unit At Water Works Kalka And All Other Works Contingent Thereto, Rewari-Haryana
TDR : 55438769
Tender Notice
BOQ
5 Days Left
Rewari
Haryana
Tender For Annual Maintenance Estimate Of Master Water Supply Rewari, Providing And Fixing Of Chowkhat, Flush Door And Other Wood Work, Plastering Work , New Paint Work In Filteration Unit At Water Works Kalka And All Other Works Contingent Thereto
Name of Work:- Annual maintenance estimate of Master Water Supply Rewari,`` providing and fixing of chowkhat, flush door and other wood work, plastering work , new paint work in filteration unit at water works Kalka and all other works contingent thereto``
Sl. No.
Item Description
1
[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)
2
[11.95.1]Finishing walls with Acrylic Smooth exterior paint of required shade : 1. New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
3
[12.36.1]Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
4
[13.21.1]Supply and fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm and Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets and screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification and entire satisfaction of Engineer-in-charge. 1. Door Frame of size 80mm x 50mm with 37mm wide single rebate for 35mm door shutter
5
[13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
