|
| 1 | PART(A) Street Light Work |
| 2 | S/Fof decorative pole of Durable Mild Steel with a total height of 8mtr above ground level. Pole bottom base section shall be 300x150x1500mm, 4mm thickness column with predesigned laser cut Pattern to illuminate the surroundings in 20W with noticeable mode, next-section of double pipe of size 60x6500x3mm to work together to form unique design with mid section of illuminated in warm white laser cut design with golden casting embellishment and predesign laser cut illuminated in arm white 60W double arm bracket of 3900mm long. The base plate of pole shall be of size 550x350x12mm. Bracket hold street light of 150W each.Provision for inside termination box with 4way connector & 2 nos 6 AMPS MCB for local isolation. The pole is primarily coated with primer, secondary epoxy resin and top coated with UV stabilized powder coat and cured. The decorative pole is suitable for outdoor lighting application. Pole light is complete in all aspects with all accessories. as per direction of engineer-in-charge. (A.R.) Make Ligman/Regent/Kesselac/Philips or any other equivalent make as per E/I. |
| 3 | Construction of civil foundation for 10/8.0M decorative pole (RCC 1:2:4) size 600x600x2300mm having verticle m.s. bar size 12mm, 8 Nos. of square m.s. ring of 500mmX500mm from 8mm bar with 63mm HDPE pie for cable entry size 0.5mX2Nos. etc. complete in all respect as per direction of Engineer-in-charge. PSR. |
| 4 | S/F of decorative column light is 3mtr above the ground level.Bottom Section of the column 2000X160mm, Illuminated section 1000mm.Base Pleate size:250X250X10mm thickness.Diffuser made of UV stabilized clear or PL.Column light is faricated from aluminium extrusion or MS with precisely cut patterns for a sophisticated presentation.Fitting is wired with control gear suitable for LED engine of 30W,CRI>80,110lm/W, IP65 and life time 50000hrs. CCT 3000K/4000K/6500K as per the Project. The decorative pole is suitable for outdoor lighting application.Column light is complete in all aspects with all accessories. as per direction of engineer-in-charge. (A.R.) Make Ligman/Regent/Kesselac/Philips or any other equivalent make as per E/I. |
| 5 | Construction of civil foundation suitable for upto 7Mtr. pole (R.C.C. 1.2.4) size 500x500x1800mm having vertical m.s. bar size 12mm, 8Nos. & square m.s. ring of 400x400x8mm bar with 63mm HDPE pipe for cable entry size 0.5mtr x 2 Nos.. etc complete in all respect as per direction of E/I. |
| 6 | Supply, Laying, jointing, testing & commissioning of ISI marked HDPE pipe (PE 80) 63mm dia as per IS 4984 including transportation upto the site jointing by butt welding, providing and fixing all fittings i.e. bends, tees, couples junction, tapers, reducers, adoptors end caps, flange with nut & bolts for fixing of appurtenances compete in all respect as per direction of Engineer-in-charge. (ISI Approved). |
| 7 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only SOR/Elec/18/Ch.8/812. |
| 8 | (a) Incoming 200 Amp. MCCB 1 No. Outgoing 100 Amp MCCB-1 Nos. & 63 Amp. MCCB-3Nos. |
| 9 | S/F of 40A TPN of Automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc, in case of TPN, complete in all respect as per direction of Engineer-in-charge. |
| 10 | S/L of following cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and protected with burnt bricks on side an top on surface the cable run shall be fixed on MS clamp of suitable size, approved make UPPPCL/Kesco Approved as per direction of E/I. complete in all respects. |
| 11 | (a) 16 Sq.mm 4 Core |
| 12 | (b) 50 Sq.mm 3½ Core |
| 13 | (c) 95 Sq.mm 3½ core |
| 14 | (d) 120 Sq.mm. 3½ core |
| 15 | S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I. |
| 16 | (a) 16 Sq.mm |
| 17 | (b) 25 sq.mm. |
| 18 | (c) 50 Sq.mm |
| 19 | (d) 70 Sq.mm |
| 20 | (e) 95 Sq.mm |
| 21 | (f) 120 Sq.mm |
| 22 | S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole. A.R./ 2018 |
| 23 | S/B of 600mmx600mmx6mm G.I plate vertically for earthing with it top at least 3 mtr below G.L. complete with 20mm dia G.I. pipe and funnel for watering and 1 earthing lead of 1 No 8 to 10 SWG G.I. wire in 15mm dia G.I. pipe, plate up to switch board 30Cm C.I. frame with hinged cover masonry housing Alternate layers of charchole/coke and solt at least 150mm thick allround etc. as per direction of E/I. Complete in all respects. |
| 24 | S/L of following size G.I. ''B'' class pipe at a depth of 750mm below ground level as cable carrier as direction of E/Inch. A.R. /2018 |
| 25 | 80 mm dia |
| 26 | Trenchless horizontal boring with more than 2 mtr. And up to 3mtr below ground level with 180mm HDPE pipe (PE-80 PN-6 Grade) by mechine technology including cost of HDPE pipe , T&P, Labour and all required material suitable for laying of HT 33000V cable 300sqmm to 400sqmm and 33000V HT cable 120sqmm to 4000 sqmm and 33000V HT cable upto 120sqmm with proper comletion of work. |
| 27 | Deduct in item No. 8 of this estimate due to cable is passed through GI/MS/Hume pipe the cost of pipe is to be extra. |
| 28 | (PART-B) H.T./L.T. work |
| 29 | S/F of double pole structure with 2 nos S.T. pole for S/S 410 SP-61 in 1:3:6 CC foundation 1/6 of pole length below G.I. and 30cm above G.I. 20cm thick around the pole with 1 nos. channel 100mmx50mm 1 Nos. channel 75mmx40mm necessary nuts bolts complete with painting etc. as per direction of E/I. |
| 30 | S/E of S.T. pole 11.00 mtr long designated 410-SP-55 including base plate in 1:3:6 c.c. foundation excavation 1/6 of pole length below G.L. and plinth 30 cm above G.L. around the pole 20 cm thick and back filling etc. complete in all respects as per direction of E/Ic PSR. |
| 31 | Painting of the electric pole with 2 coats of AL’ paint over red oxide primer complete in all respects SI.No.634/18. |
| 32 | S/E of stay set at 3.5mtr away from the pole with galvanized 19mm dia 1.8 mtr long stay rod 30cmx30cmx6.3mm anchor plate thimble stay clamp stay insulator 19mmx600mm double screw tightener, 7/3.5mm G.I. stay wire etc. in 1:3:6 C.C. in all respects. |
| 33 | S/F of “V” shape cross arm of 75mmx40mm. (6.8Kg/Mtr.) channel on pole, pin hole for 11 K.V. pin insulator, distance between pin hole insulator is 1220mm and total length of channel 1818mm including half clamp made of 50x6mm flat iron complete with red enamel paint. as per direction of E/Ich. |
| 34 | S/F of M.S. Channel 0.35 meter long on top pole chaneel 100x50mm as per direction of E/I (PSR). |
| 35 | S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole. A.R./ 2018 |
| 36 | S/F of 11 KV Pin insulator with G.I. Bolt /spindle nut etc. complete in all respects. A.R/ 2018 |
| 37 | S/F of 11 KV Disc insulator including gun fitting on cross arm/clamps fixed on pole complete in all respects. A.R/2018 |
| 38 | S/E of over head line with A.C.S.R. conductor on pole/service bracket including binding etc. complete in all respects. S.I.No-627/18. Racoon/Dog |
| 39 | S/F of M.S. Channel 1.38 meter long on top pillar size 100x50mm as per direction of E/I. (Analysed as per SOR-2020 civil) |
| 40 | S/E of 11 K.V L.A. set of 3 Nos. suitable for mounting on steel support complete in all respect as per direction of E/I. A.R./2018. |
| 41 | S/E of 11 K.V. T.P.M.O. switch on pole including handle rod etc. complete in all respects as per direction of E/Ich. A.R./2018 |
| 42 | S/E of 11 K.V. D.O. fuse set on pole complete in all respect as per direction of E/I. |
| 43 | S/L of 70 Sq.mm 3 Core XLPE 11 KV HT cable proper completion of work As per direction of E/I( Make havells, Gloster, Polycab) (Analysed as per UPPCL SI Rate 2022-23) |
| 44 | S/F of 70 Sq.mm size 3 core XLPE 11 KV outdoor type jointing kit proper completion of work as per direction of E/I A.R. Make: Raycheme, Mahindra. (Analysed as per UPPCL SI Rate 2022-23) |
| 45 | S/F of level 2 following capacity 11/0.433 K.V. Al’ wound conventional 50Hz 3 phase oil immersed naturally cooled distribution T/F confirming and with amendments there of, having losses as per BEE standered with all standard fittings, including first filling of oil complete in all respects, of make UPPCL/KESCO Approved . |
| 46 | 100 KVA |
| 47 | S/B of 600mmx600mmx6mm G.I plate vertically for earthing with it top at least 3 mtr below G.L. complete with 20mm dia G.I. pipe and funnel for watering and 1 earthing lead of 1 No 8 to 10 SWG G.I. wire in 15mm dia G.I. pipe, plate up to switch board 30Cm C.I. frame with hinged cover masonry housing Alternate layers of charchole/coke and solt at least 150mm thick allround etc. as per direction of E/I. Complete in all respects. |
| 48 | S/L of 32mmx6mm GI strip from earth electrode directly in the ground as required complete in all respect . |
| 49 | S/F of Henley type switch fuse unit complete in all respect as per direction of E/I. |
| 50 | S/E of 2.24 Mtr. Long cross arm 100mm x 50mm (ISLC 100) channel on pole including clamps, eye bolts etc. with red enamel paint as per direction of E/Inch . |
| 51 | S/E of 2.24 mtr. Long cross arm 50mmx50mmx 6mm. Angle iron on pole including clamps, eye bolts with red enamel paint etc. as per direction of E/I. |
| 52 | S/L of following size G.I. ''B'' class pipe at a depth of 750mm below ground level as cable carrier as direction of E/Inch. |
| 53 | 80 mm dia |
| 54 | S/F of Hexagonal cradle type guards made of 8 to 4 SWG G.I wire etc complete in all respects.. including binding. |
| 55 | S/E of over head line with G.I. wire on 8 to 4 SWG on pole/service bracket including binding etc. complete in all respects. |
| 56 | Deduct in item No. 15 of this estimate due to cable is passed through GI/MS/Hume pipe the cost of pipe is to be extra. |
| 57 | S/F of 11000 V danger board and Fabricated from 10 gauge MS sheet on pole as per electricity rule as per direction of E/Ich. |
| 58 | S/L of following cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and protected with burnt bricks on side an top on surface the cable run shall be fixed on MS clamp of suitable size, approved make UPPPCL/Kesco Approved as per direction of E/I. complete in all respects. |
| 59 | 120 Sq.mm. 3½ core |
| 60 | S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I. |
| 61 | (a) 70 Sq.mm |
| 62 | (b) 120 Sq.mm |
| 63 | Part C (AMC) |
| 64 | Annual Operation and maintenance including all i.e. Labour, Material, Hydraulic Sky Lift, Hydra Crane, T&P etc. as per direction of engineer in charge. (Cost variation depend on actual completion of installation work Part A section). |
| 65 | Part-D Divider work |
| 66 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil. |
| 67 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 68 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.. Dsr 4.3.1 |
| 69 | Providing and laying in position machine batched and machine mixed design mix M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying but including the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.(Note :- Cement content considered in this item is @ 330 kg/cum.Excess cement used as per design mix is not extra payable (All work upto Plinth Level) dsr no. 5.33.1.1 |
| 70 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 71 | Providing and applying white cement based putty of average thickness of 1mm ,of approved brand and manufacture over the plasterd wall surface to prepare ecen and smooth including cost of materials , labour & T&P etc.complete. |
| 72 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 73 | Part-E HORTICULTURE WORK |
| 74 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 75 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 76 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : |
| 77 | Rough dressing the trenched ground including breaking clods. |
| 78 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. |
| 79 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 80 | Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). |
| 81 | Providing and stacking of Ficus benjamina (green) of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge. |
| 82 | Providing and Displaying Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot as per direction of the officer-in-charge. |
| 83 | Providing and stacking of Thuja compacta of height 45-60 cm., well branched in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 84 | Providing and stacking of Nerium oleander (kaner) of height 45-60 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge. |
| 85 | Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 86 | Providing and stacking of Lagerstromia flosreginae of height 150-165 cm in poly bags of size 25 cm as per direction of the officer-in-charge. |
| 87 | Providing and displaying of Phoenix palm having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 88 | Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. |
| 89 | Providing and stacking of Alstonia scholaris of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. |
| 90 | Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge. |
| 91 | Providing and Displaying Euphorbia milli hybrid variety with multi branch, full bloom, with fresh and healthy well developed having 30 to 45 cm ht. in 35 cm Cement Pots as per direction of the officer-in-charge. Please Enable Macros to View BoQ information |
