|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil. DSR 2023- 2.8.1 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). DSR 2023- 4.1.8 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 2023- 6.1.1 |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 2023- 15.56 |
| 5 | 12 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand) DSR 2023- 13.4.1 |
| 6 | SF of FRP DAKOCO vpes big size designer dustbin of approved quality approved by El etc made of polycorbonate or equvalent materials with including differont otourtull colours of 3X1/2*X2\\" dia size etc including cartage of dustbin contractor their won sources etc including supply of all materials T &P all complete work (S/R) |
| 7 | 'Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all material & labour required fixing and orienting etc all complete under the direction of the E'/I. Sanction Rate |
| 8 | Supply & fixing of wave slide (m) four seater SD-05B (height6\\") including cost of| wave slider (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal gnt with CC 1:2:4 cement coarse sand & 20 mm gauge stone gnit including all material & labour equired fìng and onienting etc all complete under the direction of the Engineer.S/R |
| 9 | |Supply & Fixing of Swing 4 seater SW-2 including cost of swing seater (shape & size attached witth estime) fixing the swing seater including excavation PCC 1:4:8 cement C0arse sand & 40 mm nominal gnt with CC 1:2:4 cement coarse sand & 20 mm gauge stone gnt incduding all material & labour required fixing and onenting etc all complete under the direction of the EN, Sanction Rate |
| 10 | CHEST PRESS DIMENSIONS: PRODUCT AREA:3.6 FT X 2.8 FT SAFE PLAY AREA :7.6 FT X 6.8 FT FUNCTIONS: STRENGTHENS GLUTES, CHEST, SHOULDER. UPPER & MID ABS, FORE ARM & TRICEPS TECHNICAL SPECIFICATIONS: CENTER FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE MAIN FRAME: 40 NB & 32 NB GI B-CLASS PIPE JINDAL MAKE HANDLE FRAME: 32 NB & 25 NB GI B-CLASS PIPE-JINDAL MAKE CONNECTING PIPE: 32 NB & 25 NB & 40 NB GI B-CLASS PIPE- JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN SEAMLESS PIPE & ROUND BAR BEARINGS: REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 |
| 11 | \\"PROVIDING AND FIXING OF SHOULDER TWRIL DOUBLE FUNPLAY FNF 032 HAVING DIMENSION: • PRODUCT AREA : 3 FT X 2.1 FT • SAFE PLAY AREA :7 FT X 6.1 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHEN SHOULDER AND IMPROVES BODY CONSISTENCY & ELIGIBILITY. TECHNICAL SPECIFICATIONS: MAIN FRAME: 100 NB GI C-CLASS PIPE -JINDAL MAKE WHEEL FRAME: 25 NB & 20 NB GI B-CLASS PIPE -JINDAL MAKE PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached\\" |
| 12 | \\"PROVIDING AND FIXING OF FUN ROWER FUNPLAY FNF 003 HAVING DIMENSION: • PRODUCT AREA : 4.7 FT X 2.5 FT • SAFE PLAY AREA : 8.7 FT X 6.5 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS BACK MUSCLES, SHOULDER ARM MUSCLES AND ABDOMEN, ALSO IMPROVES CARDIO VASCULAR ENDURANCE. TECHNICAL SPECIFICATIONS: MAIN FRAME: 80 NB GI B-CLASS PIPE JINDAL MAKE SEAT FRAME:50 NB GI B-CLASS PIPE -JINDAL MAKE HANDLE FRAME:32 NB GI B-CLASS PIPE -JINDAL MAKE PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS BEARINGS:PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached |
| 13 | \\"PROVIDING AND FIXING OF TWISTER THREE WAY FUNPLAY FNF 009 HAVING DIMENSION: • PRODUCT AREA : DAIMETER 5.5 FT • SAFE PLAY AREA : DIAMETER 11 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS ABDOMINAL MUSCLE TECHNICAL SPECIFICATIONS: MAIN FRAME : 100 NB GI C-CLASS PIPE -JINDAL MAKE HANDLE FRAME: 20 NB GI B-CLASS PIPE JINDAL MAKE TWISTER DISC: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\"\\" X 1.5\\"\\". PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached\\" |
| 14 | PROVIDING AND FIXING OF AIR WALKER DIMENSION: PRODUCT AREA :4.8 FT X 2.1FT SAFE PLAY AREA :8.8FT X 6.1FT AGE GROUP: 13 ABOVE YRS. FUNCTION: STRENGTHENS LEG MUSCLES, IMPROVES CARDIO VASCULAR ENDURANCE TECHNICAL SPECIFICATIONS: MAIN FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE LEG FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE FRAME: 25 NB GI B-CLASS PIPE -JINDAL MAKE FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE END CAP: GALVANISED CAP. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS, IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. NUT BOLTS: GALVANISED NUT BOLTS, BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT DONE BY FIRST COAT OF PRIMER - JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS, TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE Sanctioned Rate |
| 15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 2023- 13.80 |
| 16 | Finishing walls with textured exterior paint of required shade :, New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm. DSR 2023- 13.45.1 |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:, Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR 2023- 13.62.1 |
| 18 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. DSR 2023- 16.83 |
| 19 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layer with motor graded on perpared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratoy roller to achieve the desired density complete as per clause 401. for grading I material (GSB-1) (Sanction rate) |
| 20 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be supplied by the department free of cost). DSR 2023- 16.84 |
| 21 | Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)., Light shade pigment using white cement. DSR 2023- 11.20.1 Please Enable Macros to View BoQ information |
