|
| 1 | Replacement of Valves, Actuators and Pipes in pipe galary. |
| 2 | 1.1) Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to requried size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc, complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). |
| 3 | 1.1.1) Dia of Pipe : 323.90 mm (O. D.) Thickness of pipe : |
| 4 | 1.2) 9.5 mm. |
| 5 | 1.2.1) Dia of Pipe : 406.00 mm (O. D.) Thickness of pipe : |
| 6 | 2) 10mm. |
| 7 | 2.1) Providing, erecting Electric Valve Actuator for non rising spindle type sluice valve of PN 1 & PN 1.6 rating, totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction |
| 8 | 2.1.1) Electric Valve Actuator for non rising spindle type sluice valve, PN 1 & PN 1.6 rating For Valve Size |
| 9 | 2.1.2) VA 1-9) 300 mm dia |
| 10 | 2.1.3) VA 1-11) 400 mm dia |
| 11 | 3) VA 1-13) 500 mm dia |
| 12 | 3.1) CI PIPES |
| 13 | 3.1.1) Providing and m aking f langed j oints t o f langed C .I./M.S. p ipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete. Note :Only 85 % rate shall be payable till s atisfactory Hydraulic testing is given. |
| 14 | 3.1.2) 300 mm. |
| 15 | 3.1.3) 400 mm. |
| 16 | 4) 500 mm. |
| 17 | 4.1) Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 18 | 4.1.1) Sluice valve - PN - 1.6 (Without by pass arrangement) |
| 19 | 4.1.2) 100 mm. |
| 20 | 4.1.3) 300 mm. |
| 21 | 5) 400 mm. |
| 22 | 5.1) Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 23 | 5.1.1) Lowering,laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves |
| 24 | 5.12) 100 mm. |
| 25 | 5.1.3) 300 mm. |
| 26 | 5.1.4 ) 400 mm. |
| 27 | 6) 500 mm. |
| 28 | 6.1) Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental store, excluding GST levied by GOI & GOM in all respect etc. complete. |
| 29 | 6.1.1) Air Valve Double Ball Flanged Type - PN - 1.6 |
| 30 | 7) 100 mm. |
| 31 | 8) Helper |
| 32 | 8.1) HIRE CHARGES OF MACHINERIES |
| 33 | 9) Rent for Concrete breaker & Compressor |
| 34 | 9.1) D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with I SI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. Diameter in mm |
| 35 | 9.1.1) Blank Flange -PN-1 |
| 36 | 10) 8) 400 mm dia |
| 37 | 10.1) Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. |
| 38 | 11) 10 mm. |
| 39 | 11.1) Credit for Dismantled Material |
| 40 | 11.2) H.G. / M.S. / G.I. Materials / Poles etc. |
| 41 | 12) Sangli Miraj Indl. Area…M&R to W.S.S…painting to filter house building at WTP Kupwad. |
| 42 | 12.1) Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed. |
| 43 | 12.2) Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. |
| 44 | 12.3) Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in one coat including scaffolding, preparing the surfaces. (excluding the primer coat.)etc. complete. |
| 45 | 12.4) Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. |
| 46 | 12.5) Removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete. |
| 47 | 12.6) Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. |
| 48 | 12.7) Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. Please Enable Macros to View BoQ information |
