|
| 1 | Demolition of brick work including all quoins, arches,pillars etc, but excluding ashlar facings built in cement mortar, complete all as specified and directed. |
| 2 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6, complete all as specified and directed. |
| 3 | All as per item No. 2 mentioned in above but except bricks,(Serviceable bricks obtained from item no. 1 above to be reused), complete all as specified and directed. |
| 4 | M&L Brick work with fly ash modular bricks of size-600x200x200mm, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 5 | S&F for cast iron arrow, tee, bends and designs of varoius pattern as per requirement of site for gates, rails, braces etc, complete drilled for fixing of hooks and hinges or steel hanging door fittings also fastening, welding and fixing, complete including dismantling/ taking down old existing, complete all as specified and directed. |
| 6 | Material and labour and fixed in repair for precast cement concrete louvers and jallies 40 mm thick, fixed over boundry walls using two Nos vertical members of size 100 x 90 x 800 mm height and one Nos member surmounted over vertical members of jalli (like ropes of the same materials) including all moulding, complete all as specified and directed. |
| 7 | S&F in repair of RCC M-30 Grade approved Design Precast concrete post of size 150mm x 150mm x 2100 mm height, having two grooves of size 55 x 28 mm so as to receive 7 Nos of panels having size of 1500 mm x 300 mm x 50 mm thickness (1 Panel at bottom + 4 Design Panel bottom to top +1 Jafari type panel at top as approved by Engr-in Charge/GE). The post shall be reinforced with 4 Nos of 8 mm dia bars with 4 mm dia stirrups @ 150 mm C/C, panels shall be reinforced with 4 Nos of longitudinal bars of 6mm dia plain steel & 6mm plain MS stirrups @ 150 C/C all welded. The post shall be fixed to the ground by digging a hole of 300mm x 300mm x 600 mm and filled with PCC 1:3:6 after the post should be aligned in these holes, including removal of excavated earthwork outside MoD land. The post will be erected @1.615m C/C. Height of the pillar shall be 2700mm (600mm below the ground and 2100 mm above the GL) with any approved design by Engr-In-Charge, complete all as specified and directed. |
| 8 | Demolition of cement concrete in ground floor and paving not exc. 15cm thick (below or above ground level) and removed from site of work etc, complete all as specified and directed. |
| 9 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete and like etc, complete all as specified and directed. |
| 10 | M&L for PCC 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) as in coping, bed conc and all other similar works including necessary formwork, complete all as specified and directed. |
| 11 | Material and labour for providing PCC type C-2 (1:3:6) 40 mm graded aggregate as in surface channels and drains finished even and smooth, complete all as specified and directed. |
| 12 | Material and labour for 75mm PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection and all other similar works finishing the cement concrete surface even and smooth without using extra cement, complete all as specified and directed. |
| 13 | Material and labour for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in flooring and all other similar works, complete all as specified and directed. |
| 14 | Demolition of reinforced cement concrete reinforcement cut as required to facilitate, demolition of any description and in any position, complete all as specified and directed. |
| 15 | M&L for RCC type B-1 1:2:4 (20mm graded aggregate) as in Slabs supported on walls, and all other similar works, complete all as specified and directed. |
| 16 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick, complete all as specified and directed. |
| 17 | M&L for Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as directed. |
| 18 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forming moulds, mitered/stopped ends etc, complete all as specified and directed. |
| 19 | Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 20 | Material and labour for 15-25 mm average thick Ready Mix Plaster in multy layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, including use of scaffolding, complete all as specified and directed. |
| 21 | M&L for preparing new surfaces of walls/ceilings by scrapping/rubbing and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over one coat of primer including necessary scafolding of any height for external painting, complete all as specified and directed. |
| 22 | M&L for preparing old surfaces of walls/ceilings by scrapping/rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) including necessary scafolding of any height for external painting and for complete removal of existing finish, complete all as specified and directed. |
| 23 | M&L for preparing old/new plastered surfaces of external walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Apex Ultima Protek of Asian Paint or equivalent make over a coat of primer including use of scaffoldings, complete all as specified and directed. |
| 24 | Material and labour for preperation of old / new concrete kerb stone surfaces and applying two coats of retro-reflective enamel paint of any colours and patteren, complete all as specified and directed. |
| 25 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 26 | M&L Rolled mild steel for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any of Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and directed. |
| 27 | M&L Rolled mild steel for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete confirming to Fe 410- W (Gde -E -250 quality A), complete all as specified and directed. |
| 28 | S&F mild steel for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to FE 290 Gde -E-165, complete all as specified and directed. |
| 29 | S&F MS FI 40mmx6mm as in fencing post for security post with fencing wire mash incl drilling boiling with required nuts, bolts of reqd length conforming to Fe-410-0 & Fe 310-0 (nuts & bolts to be measured separately), complete all as specified and directed. |
| 30 | S&F Rolled mild steel work in tubular trusses including special shaped washer, making curvature, bending or in other any shape complete using ERW or induction butt welded tubes conforming to IS 1161 1979 grade St 240, complete all as specified and directed. |
| 31 | M&L for excavating in trenches n.exc 1.5m wide & n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan & n exc 1.5 m in depth & getting out in soft/loose soil, complete all as specified and directed. |
| 32 | M&L for removing excavation material outside of MD land, complete all as specified and directed. |
| 33 | M&L for returning, filling in, including spreading, levelling, watering & well ramming in layer s not exc 25 cm, complete all as specified and directed. |
| 34 | Demolition and breaking up drain pipes of diameter 200 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed. |
| 35 | M&L in repairs 200 mm dia reinforced concrete pipes ,class NP3 aid and jointed with collar, complete all as specified and directed. |
| 36 | Material and labour for cement concrete type C-2 (1:3:6) using 40 mm graded aggregate bed to darin pipe 200 mm dia including packing and haunching against the sides of pipe and testing, complete all as specified and directed. |
| 37 | Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc, and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc 30 cm but n.exc 60 cm, complete all as specified and directed. |
| 38 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid, bedded and pointed in any mortar and removal of rubbish off the site outside MoD land, complete all as specified and directed. |
| 39 | M&L for 20mm thick Granite machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and rounding if required, complete all as specified and directed. |
| 40 | M&L for glazed finish chequred cement concrete coloured tiles of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) after and including 15 mm thick in cement plaster in CM (1:4) for fixing tiles, complete all as specified and directed. |
| 41 | M&L for laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, complete all as specified and directed. |
| 42 | Material and labour for crushed sand filling under precast interlocking paver blocks and all other similar works, complete all as specified and directed. |
| 43 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises, complete all as specified and directed. |
| 44 | M&L for any coloured vitrified heavy duty outdoor anti skid tiles 10 mm thick (Square/rectangular) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and including 20 mm thick in cement plaster in CM (1:4) for fixing tiles, complete all as specified and directed. |
| 45 | M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 46 | M&L for SS 304 grade stainless less tubing (Square/ Round/ Rectangular) of suitable gauge as in SS guard bars, railings, SS frame works including all fixing arrangments, including taking down of old SS guard railing, complete all as specified and directed. |
| 47 | Excavating in post holes (or similar holes) each n exc 0.5 Cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, complete all as specified and directed. |
| 48 | Dismanling of post or struts embedded in ground (wood,steel or RCC) any section including taking out embedded portion and making good to distrubed ground, complete all as specified and directed. |
| 49 | S&F PVC coated chain link wire gauge 4 mm and wire thickness 4 mm including line wire and mesh size type of standard staining bolts etc and size is 75x75mm including taking down old fence of any type and any size, complete all as specified and directed. |
| 50 | S&F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm barbed at 75 mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at corssing with and provision of galvanised mild steel wire staples or steel pins etc all as specified and as directed (Each line of wire to be measured), complete all as specified and directed. |
| 51 | S&F in repair Concertina coil with punched tape of 600mm dia centre core wire shall be minimum 2.5mm dia of mild steel wire confirming to IS 280-2006.Galvanised coating of steel concertina coil shall confirm to the requirements as laid down for medium coated wire in IS 4826 \\"Hot dipped galvanised coating of round steel wires\\" concertina coil shall be fixed in dimond shape with the help of dovetail to handle and spikes shall be fixed at both end of coil, minimum staight length of the wire 150 RM of 10 RM of work, minimum weight 13.5 Kg for 10 RM of work i.e 90 Gm/Rm of wire, complete all as specified and directed. |
| 52 | M&L MS screw bolts (machine made) 5 to 10mm Dia with hexagonal head, at one and screwed the other or screwed both ends, each screwed and to be fitted with washer and one hexagonal nut, length of bolts n.exc 5 cm long, complete all as specified and directed. |
| 53 | M&L for taking down and refixing of chequred tiles of any type and size including prepration of sub base and also including 20 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 54 | M&L for taking down and refixing of interlocking tiles including prepration of sub base and also including 25mm thick sand cushion incl watter and ramming (Compacted) and joints filled with sand, complete all as specified and directed. |
| 55 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 56 | Supply & fix corrugated/plain Pre-painted galvalume aluminium zinc coating GI based trapezoidal/mangalore tile profile roofing sheets, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg, complete all as specified and directed. Please Enable Macros to View BoQ information |
