|
| 1 | Earthwork excavation in trenches for foundation in sand and other loose soils not exceeding 1.50m in width and including dressing of sides and ramming of bottom lift upto 1.50m including getting out of the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m and lift of 1.50m, cost including shuttering, strutting, bailing out seepage of water wherever necessary etc., complete complying with AISS and as directed by the departmental officers. |
| 2 | Providing and laying Plain Cement Concrete 1:4:8 (One part of cement, 4 parts of Coarse sand & 8 Parts of 40 mm nominal size metal ) for foundation using 40 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers. |
| 3 | Providing Form work including centring, shuttering, (shuttering Planks shall not less than 38 mm thick) so as to give a rough finish shuttering and propping etc., in all floors upto full height of the building and removal of the same for in situ RCC work such as beam, slabs, lintels, sunshade etc., complete complying with AISS and as directed by the departmental officers. |
| 4 | Providing and laying Reinforced Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of Coarse sand & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., and excluding the cost of form work and reinforcement grills for all RCC works in all floors upto full height of the building etc., complete complying with AISS and as directed by the departmental officers. |
| 5 | Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers. |
| 6 | Providing and laying Plain Cement Concrete 1:2:4 (One part of cement, 2 parts of Coarse M. Sand (Crushed Stone Sand) & 4 Parts of 40 mm nominal size metal ) for foundation using 40 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers. |
| 7 | Filling basement with available excavated earth in trenches, plinth, sides of foundation etc., in layers not exceeding 20cm in depth, consolidating and watering etc., complete complying with AISS and as directed by the departmental officers. |
| 8 | Filling in basement with M. Sand (Crushed Stone Sand) to the required thickness in layers including watering, ramming, consolidating and dressing etc., complete complying with AISS and as directed by the departmental officers. |
| 9 | Filling the low lying area using dredging material / available approved material by cutting, loading, transporting by deploying required equipments like excavator, tipper, with all lifts and leads to site with an average lead of 1 Km., spreading in uniform thickness, watering, compacting by deploying required equipments like grader, roller etc., The rate inclusive of conveyance, tools & plants, hire charges for machinery, fuel charges, all labour etc., complete and as directed by the departmental officers. |
| 10 | Supplying and fixing in position of best Indian make heavy duty Gun Metal Wheel Valve at 32mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 11 | Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) ( One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in Ground Floor of the building including cost of all materials, labour, curing etc., complete complying with AISS and as directed by the departmental officers |
| 12 | Providing Half Brick Masonry wall using chamber burnt bricks in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) (One cement, three M. Sand (Crushed Stone Sand)) for partition walls etc., in Ground level including cost of all materials, labour, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 13 | Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 14 | Providing and laying terrace lime concrete weathering course with grade brick aggregate 25 mmtal officers.nominal size and 50% mortar comprising of 1 lime putty and 2 surkhi and curing including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers. |
| 15 | Finishing the top of weathering course with one course of machine pressed tiles of size 23 cm X 23 cm X 2cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers. |
| 16 | Supplying and fixing UPVC WINDOWS( Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles aremulti chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with overall the edges of frame and shutter.The shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers. |
| 17 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm X 58mm and shutter profile size of 60 X 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work. The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers. officers. |
| 18 | Providing and fixing of Anodized Aluminium Door of various size (manufactured to relevant IS Specification) of 37.5 x 37.5mm Vertical and Door bottom rails using 67.5 x 37.5mm including providing 5.5 mm thick glass superior quality for top panel and with Novapan of 8 mm thick at bottom panel with necessary accessories like snap on beading (clips), cleat angles, fully threaded 75mm long metal screws, wooden plugs & metal screws etc., wherever required, all as directed at site of work including all materials, labour, tools, equipments, scaffolding, transport, fuel, etc., complete. Note: Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including using glazing clip, rubber beading for glazing and necessary screws, plugs etc., complete and as directed by the departmental officers. |
| 19 | Supplying and fixing of Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN (make) 'GAZEL' (or) Equivalent (with ISI Monogram) for the doors including cost of door closer, accessories, labour, tools, etc., complete and as directed by the departmental officers. |
| 20 | Supplying and fixing Solid Panel PVC door with frame - Supplying and fixing Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames.15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., complete and as directed by the departmental officers. |
| 21 | Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary labour and furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work. |
| 22 | Providing and laying approved colour and quality of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 20 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISS and as directed by the departmental officers. |
| 23 | Supplying and fixing in position of best Indian make chinaware water closet of indian style (white color) of approved quality (make parryware/Hindware) and size 580mmx440mm with foot rests (Oriya type) with necessary 'P' or 'S' trap in brick jelly concrete in lime mortar 1:2 (one lime two sand) and plastering with CM 1:3 (one cement, three sand) finshing roughly to receive floor finish including all materials, labour etc., complete complying with AISS and as directed by departmental officers. |
| 24 | Supplying and fixing in position of best Indian make chinnaware water closet of European type (White) of double trap syphonic with fibre cover including all fittings and necessary lead pipe jointing the trap with C.I. pipe, the pipe connection being embedded below floor level in brick jelly concrete in lime mortar 1:2 including cost of fittings of low level flushing cistern with syphonic fitting tank of 12.5 litre capacity with inlet and over flow at bottom and connecting it with water supply pipe line and painting the pipe line with two coats of paint approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 25 | Supply of Ewc Tank (flush TANK) at Maintenance subdivision office including conveyance charges complete and as directed by the departmental officers. |
| 26 | Supplying and fixing of Lipped Mouth Porcelin Flat Urinal (White) of approved quality with all accessories such as 32mm dia bell mouth PVC connection, 15mm dia G.M wheel valve, 15mm ida 'B' class GI waste water pipe, 15mm dia nylon coneection, 15mm dia brass nipple, including all materials, labour etc., complete complying with AISS and as directed by the departmental officers |
| 27 | Supplying and fixing in position of Brass Chromium Plated Shower Rose - 100mm dia. including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 28 | Supplying and fixing in position of 600 x 450 mm size Mirror of best make, first quality approved by the department including plywood back, plugs, screws etc., complete complying with AISS and as directed by the departmental officers. |
| 29 | Supplying and fixing in position Brass Chromium Plated Soap Tray of size 150mm x 100mm first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 30 | Supplying and fixing in position of Brass Chromium Plated Towel Rail 60cm long and 20mm dia. with Brackets first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 31 | Supplying and fixing in position of 100mm inlet and 75mm OD outlet PVC floor Nahini Trap of self cleaning design including necessary cement mortar should be provided wherever if required with necessary cement concrete 1:2:4 for embedding, curing, finishing including all materials, labour charges, & conveyance etc., complete and as directed by the departmental officers. |
| 32 | Supplying and fixing of 1000 litres capacity Sintex double layer water tank with approved brand including cost of PVC water tank, making connection with input and output water pipe line and valves. Cost inclusive of all materials, labour charges, & conveyance etc., complete and as directed by the departmental officers. |
| 33 | Supplying and fixing in position of chinnaware Wash Basin (White color) 550 mm x 400mm size with pedestal of approved quality with necessary fittings such as cast iron bracket, 1 no 15mm C.P heavy duty piller tap with pentagonal head, 32mm dia PVC wastewater pipe and 15mm dia nylon connection, 1 No 15 mm dia G.M. wheel valve and fixing it with the wall with necessary plugs, clamps and screws, and giving water supply connection and painting the exposed pipe connection with two coats of paint of approved colour, including all labour, materials etc., complete complying with AISS and as directed by the departmental officers. |
| 34 | Supplying and fixing 25mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls, packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers. |
| 35 | Supplying and fixing 32mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls, packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers. |
| 36 | Supplying and laying in trenches 110 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers. |
| 37 | Supplying and fixing in position 15mm dia. Heavy type Brass Chromium Plated Pillar tap of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 38 | Providing and fixing granite slabs (jet black) of 20mm thick (super fine polished with nosing edges) on the steps area of building, in between urinals and wherever required. The rate inclusive of costof granite slab, chemical component, white cement, labour charges & conveyance etc., complete and as directed by the departmental officers.. |
| 39 | Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade. Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 40 | Applying One coat of Alkali Resistant Primer and Two coats of APEX - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 41 | Writing letters or figure on any surface with enamel painting (stops, comas, hyphens and the like not to be measured and paid for seperately) of approved colour and quality for 15 CM height letters including cost of enamel paint, labours, scaffolding charges and cleaning the surface etc., complete complying with AISS and as didrectred by the departmental officers. |
| 42 | Providing and fixing of 12.5 mm thick Gypsum Board False ceiling with suspended GI channels for every 2'-0# x 2'-0# c/c fixed with brass screws, etc. The surface joints to be finished with paper tape and putty etc.,. The cost including for all the materials, labour charges ... etc. complete and as directed by the departmental officers. |
| 43 | Providing, Supplying and Laying of Pre-cast Cement Concrete Block of size 200mm x 100mm x 100mm for heavy drive road ways and heavy loaded truck parking area of required strength of M-40 grade made with suitable vibratory method mould, laid in requireddesign & patten at site over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand etc., complete and as directed by the departmental officers. |
| 44 | Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer). |
| 45 | Providing and fixing Precoated metal sheet 0.45mm for Roofing with hot dipped galvanised prepainted steel sheet for roof of make TATA or equivalent including cost of metal sheet, conveyance, fixing the sheet with necessary clamps / screws and labour charges for fixing sheet etc., complete complying with AISS and as directed by the departmental officers. |
| 46 | Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers. |
| 47 | Providing and fixing R.C.C. Pre-cast slab 100mm thick of various size in Cement Concrete 1:1.5:3 including all labour, materials, form work, reinforcement, conveyance and fixing the slab etc., complete complying with AISS and as directed by the departmental officers. |
| 48 | Supplying and fixing of 5HP (mud pump) Kirloskar KBL make SP3L+ with 5C4 motor model size 80x80mm, 3.7KW/5HP/415V/50HZ, Selfpriming Coupled Pumpset motor. The cost inclusive of motor, labour, fixing with necessary fixtures, conveyance & functioning etc., complete and as directed by the departmental officers. |
| 49 | Supplying and fixing Rolling shutters with ISI make of approved size and section using 18 GI sheet with Gear Operated Type (from 8 sqm. to 12 sqm. Area), M.S.laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength and M.S top cover to required thickness for rolling shtters. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., including cost of all materials, labour charges and minor tools, all handling and transportation charges to work site etc., complete and as directed by the departmental officers. |
| 50 | Supplying, fabrication and fixing knitted high strength wind screen mesh made up of HDPE mono filament yarn and UV stabilized. The colour of the fabric shall be blue / green / black or any approved colour withstanding capacity 150 Kmph Wind velocity with 60% blockage and weight of 220 gms / sqm. including cost of knitted high strength wind screen mesh, conveyance, fixing chatges, labour, tools, fuel, etc., complete and as directed by the departmental oficers. |
| 51 | Fabricating and fixing in position MS sheet Caution board of size 1.20m x 0.90m with MS angle 35mm x 35mm x 5mm for frame and MS angle 75mm x 75mm x 8mm for legs to a height of 3.0m including cost of angle, 2mm tk. MS Sheet, all materials, one coat of primer (Red oxide) and two coats of Synthetic enamel paint over the red oxide primer and writing letters & figures of height 7.50 cm, including Earthwork excavation, Plain Cement Concrete 1:4:8, labour, conveyance etc., complete and as directed by the departmental officers. |
| 52 | Supplying and fixing of Stainless Steel sink using 304L Grade of size 600mm x 450mm x 200mm. with necessary fittings. The rate inclusive of Stainless Steel Sink, fabrication charges, conveyance charges, fixing charges, labour, necessary fittings Such as1 No. of 32mm dia. Waste Water pipe, 32mm dia. C.P. Waste Coupling etc., complete and as directed by the departmental officers. |
| 53 | Providing and fixing Retro - Reflectorised Cautionary, Mandatory and Informatory traffic signs (with definition board) - 80 cm x 60 cm Rectangular made out of High Intensity Prismatic Grade Sheeting conforming to 'Type - IV' standards of IRC 67 : 2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild steel sheet and supported on a mild steel angle post 75mm x 75mm x 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67 - 2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm size including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the departmental officers. High intensity Retro - Reflectro sheet shall consist of minimumco-efficient of Retro-reflection as per Table 6.6 of IRC 67 : 2012. The Retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure reportshall be obtained as per IRC 67 : 2012 (As per MORT&H Specification (Fifth Revision) Clause No.801). Please Enable Macros to View BoQ information |
