|
| 1 | CIVIL WORK |
| 2 | Earth work in stoney earth and gravels mixed with stone and boulder not exceeding 0.014 cum in volume within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.3m in depth and as per specification approved by the dept. |
| 3 | Ordinary Soil |
| 4 | Stoney earth |
| 5 | Soft Rock |
| 6 | Hard Rock |
| 7 | Extra for every additional lift of 1.5 m or part there of in excavation/ banking excavated or stacked materials |
| 8 | Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour cess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge. |
| 9 | Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. |
| 10 | Making plinth protection 150 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth |
| 11 | Supplying , diluting and and preparing chemical emulsion like CHLORPYRIPHOS or other chemicals approved by central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, surrounding the pipes and conduits etc. complete at the rate of 7.5 litres ( or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc. complete.as per IS:6313/1981 (PART-II) and as per the direction of engineer-in-charge including all cost of materials labour, taxes etc. all complete. |
| 12 | Providing and laying P.C.C[1:4:8] using 4cm size metal etc in foundation and floors using cement , 40 mm size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry including hoisting ,lowering and laying concrete to the required level, ramming ,watering and curing etc |
| 13 | Providing and laying in position ready mixed M25 grade concrete having compressive strength at 28 days test not lessthan 250kg/sq.cm for reinforced cement concrete work using cement content as per approved design mix etc including Rigid & smooth centering and shuttering. |
| 14 | For R.C.C foundation, footing bases of column, mass concrete,pre-cast etc. |
| 15 | For R.C.C plinth band etc. |
| 16 | R.C.C Beam & Coloum |
| 17 | Lintel |
| 18 | Chaja |
| 19 | Roof slab,Landing,Balcony, |
| 20 | Cutting ,Straightening coiled or bend up HYSD/TMT Reinforcement bars welding or jointing if necessary , bending ,tying the grills as required for R.C.C works etcwinding wire extra |
| 21 | Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 11 c.m x 8 c.m in Foundation & Plinth having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. |
| 22 | Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 11 c.m x 8 c.m in superstructure having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. |
| 23 | Fly Ash Brick masonry in cement mortar of mix [1:4] using Fly Ash bricks of size 25cm12cmx8cm in superstructure having crushing strength not less than 75 kg /m2 etc[Half Brick work] |
| 24 | Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost,conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P,sundries and scaffolding required for the work etc. as directed by the Engineer-in- charge. |
| 25 | Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary)including watering and curing,rounding of corners etc. complete with cost,conveyance,loading, unloading,royalities and taxes of all materials,cost of all labour,T&P,sundries and scaffolding required for the work etc. as directed by the Engineer-in- charge. |
| 26 | Providing average 6 mm thick cement plaster(1:4) to R.C.C surfaces finished smooth including deep chipping & slurring treatment etc. complete.as per the direction of the Engineer-in-charge. |
| 27 | Providing and applying 2 coats with 100% acrylic emulsion paint on New surface including one coat of primer (exterior quality) of approved make & shade by reputed manufacturer to make an even finished surface over a coat of primer with water bound cement primer in all heights with all scaffolding and staging charges including cost , conveyance, taxes of all materials, cost of all labours , T & P, sundries etc. as required for the work complete. |
| 28 | Supplying and painting of internal walls and ceiling with two or more coats of ACRYLIC emulsion paint on New surface which includes two coat of internal putty with a coat of primer all complete. The shade and brand to be of approved brand & shade over the surfaces including preparation of surface, with cost of all materials, labour, conveyance taxes of all materials,scaffolding etc., as per the direction of the Engineer-in-charge. |
| 29 | Painting with synthetic enamel paint over a coat of primer of approved colour, shade and brand on New wood work /steel work in two or more coats as required to give an even shade including an under coat of suitable primer of approved brand and manufacturer including cost of all materials with taxes and transportation, loading, unloading, scaffolding, all labour, Labour cess, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge including filling gaps with putties, scrapping, sand papering and cleaning the surface to make free from rusts, dusts and oily substances before applying primer etc. complete. |
| 30 | Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make conforming to I.S 13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 sand )and filling joints with white cement of approved quality including cost of all materials, labour T&P etc.required for the work all complete as per direction of engineer in charge. |
| 31 | Fixing vitrified tiles (600mm x 600mm) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete as per direction of engineer in charge. |
| 32 | Fixing Granite tiles (19MM thk) in floors treads or steps and landing on 25mm thick bed of cement mortar 1 :1 (1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete as per direction of engineer in charge. |
| 33 | Fixing Manglore tiles (400mm x 250mm) on roof top over 25mm thick cement plaster (1:1) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete as per direction of engineer in charge. |
| 34 | Providing and fixing 30 mm thick factory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of required size fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all complete as per direction of engineer in charge. |
| 35 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778 as windows frame, section No. 4095, 4096 and 9777, 3994 as shutter frame with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. including cost of frosted glass. |
| 36 | Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing including cost, conveyance, loading, unloading, stacking, royalties and taxes of all materials, cost of all Labour, Labour cess ,Sundries, T&P required for the work etc.complete as per the direction of Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.) |
| 37 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr.C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification ,buffing, polishing etc with cost,conveyance,taxes of all materials, labour, T & P etc. requird for the complete in all respect. |
| 38 | 2.5 cm thick grading Plaster (1:4) on roof slab with 6mm size HG chips including all cost, conveyance, royalty & taxes etc.comp.to work site for new work as per the specification approved by the department & direction of E.I.C |
| 39 | Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. |
| 40 | Group A |
| 41 | Group B |
| 42 | Group C |
| 43 | Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. |
| 44 | Recessed wiring to fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked, ceiling rose and Modular Stepped Fan Regulator mounted on G.I modular box with face plate & cover of suitable size with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. |
| 45 | Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge. |
| 46 | Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required and approved by Engineer-i-Charge. |
| 47 | Ceiling mounted 600mm X 600mm 36W Surface/recessed LED fixture |
| 48 | Ceiling mounted 15W LED of Recessed/Surface light. |
| 49 | 45W LED Street Light fixture with required size GI clamp and accessories as required for fixing in wall. |
| 50 | BLDC type 1200mm Ceiling Fan |
| 51 | 250mm PVC Exhaust fan with louvers |
| 52 | Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 53 | Finishing wall surface of wall with cement based wall putty [water based] of approved make and finished smooth and even surface to receive painting including cost etc |
| 54 | Fixing Ceramic tile (300mm x 300mm) in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of engineer in charge. |
| 55 | Fixing Ceramic glazed wall tile in dados skirting and risers of step on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete as per direction of engineer in charge. |
| 56 | Providing and fixing unplasticised poly vinyl chloride (uPVC) chowkhat in cluding all fittings and cost, conveyance of all materials, labours and T&P required for the work etc, all complete as per direction of engineer in charge. |
| 57 | Providing and fixing FRP door in cluding all fittings and cost, conveyance of all materials, labours and T&P required for the work etc, all complete as per direction of engineer in charge. |
| 58 | Painting 2 (Two) or more coats with Weather Coat Paint of premium brand Such as Asian/ Berger/ ICI paints or equivalent of approved quality & colour, using required quantities of paint as specified by the manufacturer to give an even shade over a coat of wall priming(water based) on the finished external plastered surface at all height , watering the surface before applying the Weather Coat Paint and curing for the required period including cost, coveyance, loading , unloading ,stacking and all taxes , cost of all Labour, Labour cess, Sundries ,Scafffolding ,Staging and T&P etc. required for the work complete in all respect as directed by the Engineer-in-charge. |
| 59 | Fixing Manglore tiles (400mm x 250mm) on roof top over 25mm thick cement plaster (1:1) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete as per direction of engineer in charge. |
| 60 | Providing and fixing factrymade 100% solid wood plastic composite (WPC) door frames made from wood plastic composite (single extructed process) material with density 0.78 kg per cum. water obsorption not more than 0.01% cum. as per direction of engineer in charge. |
| 61 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778 as windows frame, section No. 4095, 4096 and 9777, 3994 as shutter frame with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. including cost of frosted glass & SS mosquito net. |
| 62 | Fitting & fixing GI Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties including cost of materials ,labour for fixing etc all complete |
| 63 | Supplying & Fixing of Hume Pipe 1200mm dia |
| 64 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table 600.1, cement content not to be less than 150kg/cum, optimum moisture content to be determined during trial length construction , concrete strength not to be less than 10Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver and compacting with vibratory roller, finishing as per the instruction of Engineer-in-Charge |
| 65 | Fixing of interlocking blocks (PAVER STONE) of 75mm thick of approved pattern & shade over required thick bed of sand. |
| 66 | Providing bricks masonry work using (230mmx110x0cm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6) make the surface wet by water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings. including cost, conveyance, all taxes, royalties, loading and unloading of all materials, including cost of all labour, scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 67 | Fixing Ceramic tile (300mm x 300mm) in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of engineer in charge. |
| 68 | Painting marking with adequate nos of coats on the kerb stone on both sides of road to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of oil dirt, scales, oil, grease and other foreign mater;al etc. and lining out etc. complete as per direction of Engineer-in-Charge. New work (Two or more coats) |
| 69 | Supplying and painting of internal walls and ceiling with two or more coats of ACRYLIC emulsion paint on New surface which includes a coat of primer all complete. The shade and brand to be of approved brand & shade over the surfaces including preparation of surface, with cost of all materials, labour, conveyance taxes of all materials,scaffolding etc., as per the direction of the Engineer-in-charge. |
| 70 | Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make conforming to I.S 13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 sand )and filling joints with white cement of approved quality including cost of all materials, labour T&P etc.required for the work all complete as per direction of engineer in charge. |
| 71 | Fixing vitrified tiles (600mm x 600mm) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete as per direction of engineer in charge. |
| 72 | Fixing Granite tiles (19MM thk) in floors treads or steps and landing on 25mm thick bed of cement mortar 1 :1 (1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete as per direction of engineer in charge. |
| 73 | Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing including cost, conveyance, loading, unloading, stacking, royalties and taxes of all materials, cost of all Labour, Labour cess ,Sundries, T&P required for the work etc.complete as per the direction of Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.) |
| 74 | Jhulla Bridge-Earth work in stoney earth and gravels mixed with stone and boulder not exceeding 0.014 cum in volume within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.3m in depth and as per specification approved by the dept. |
| 75 | Ordinary Soil |
| 76 | Soft Rock |
| 77 | extra for every additional lift of 1.5 m or part there of in excavation/ banking excavated or stacked materials |
| 78 | Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour cess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge. |
| 79 | Providing and laying P.C.C[1:4:8] using 4cm size metal etc in foundation and floors using cement , 40 mm size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry including hoisting ,lowering and laying concrete to the required level, ramming ,watering and curing etc |
| 80 | Providing and laying in position ready mixed M25 grade concrete having compressive strength at 28 days test not lessthan 250kg/sq.cm for reinforced cement concrete work using cement content as per approved design mix etc including Rigid & smooth centering and shuttering. |
| 81 | For R.C.C foundation, footing bases of column, mass concrete,pre-cast etc. |
| 82 | R.C.C Beam & Coloum |
| 83 | RCC in slab Ground Floor |
| 84 | Cutting ,Straightening coiled or bend up HYSD/TMT Reinforcement bars welding or jointing if necessary , bending ,tying the grills as required for R.C.C works etcwinding wire extra |
| 85 | Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make conforming to I.S 13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 sand )and filling joints with white cement of approved quality including cost of all materials, labour T&P etc.required for the work all complete as per direction of engineer in charge. |
| 86 | Steel work in built up tubular( round, square or recctangular hollow tubes etc) trusses etc, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete. |
| 87 | Fitting & fixing Decking Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties including cost of materials ,labour for fixing etc all complete |
| 88 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs ,sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviceable material and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 89 | Providing and laying P.C.C[1:4:8] using 4cm size metal etc in foundation and floors using cement , 40 mm size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry including hoisting ,lowering and laying concrete to the required level, ramming ,watering and curing etc |
| 90 | Fly Ash Brick masonry in cement mortar of mix [1:4] using Fly Ash bricks of size 25cm12cmx8cm in superstructure having crushing strength not less than 75 kg /m2 etc[Half Brick work] |
| 91 | Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost,conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P,sundries and scaffolding required for the work etc. as directed by the Engineer-in- charge. |
| 92 | Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary)including watering and curing,rounding of corners etc. complete with cost,conveyance,loading, unloading,royalities and taxes of all materials,cost of all labour,T&P,sundries and scaffolding required for the work etc. as directed by the Engineer-in- charge. |
| 93 | Providing and applying 2 coats with 100% acrylic emulsion paint on New surface including one coat of primer (exterior quality) of approved make & shade by reputed manufacturer to make an even finished surface over a coat of primer with water bound cement primer in all heights with all scaffolding and staging charges including cost , conveyance, taxes of all materials, cost of all labours , T & P, sundries etc. as required for the work complete. |
| 94 | Supplying, fitting and fixing of Antiskid Ceramic Floor Tiles in flooring using special plain / printed series Ceramic Floor Tile of premium grade ( having minimum thickness 7 mm to 8 mm & size 300 mm x 300 mm OR 600 mm x600 mm, confirming toI.S 13755 of approved quality and shade in floors, treads on steps and landings on 25 m.m thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened & washed sharp etc |
| 95 | Trenching in Ordinary soil Reclamation work like that Cleaning of unwanted shrubs uprooting of stumps ,vegitation,unwanted grass,wood,twigs,breaking colds,tilling of the area,segregation of debrish stones etc and lifting the above materials from thegarden area and disposing out side the premises as per instruction of Officer-in-Charge. |
| 96 | Supply of good quality garden soil preferably red alluvial/sandy loam with texture neither too coarse nor too fine with a fair degree of water retaining capacity at site as per direction by the Officer/Site-In-Charge. |
| 97 | Supply of cow dung manure well decomposed garbage free including,unloading and delvery ,in all respect complete as per instructionby Officer/Site -in-Charge. |
| 98 | Supply & lifting and sprading of soil unifermally over the surface landscape design/advice of the Officer/Site-in-Charge. |
| 99 | Supply,Lifting and Sprading of manure unifermally as per direction by the Officer/Site -in-Charge. |
| 100 | Supply of good quality garden soil preferably red alluvial/sandy loam with texture neither too coarse nor too fine with a fair degree of water retaining capacity at site as per direction by the Officer/Site-In-Charge. |
| 101 | Supply of cow dung manure well decomposed garbage free including,unloading and delvery ,in all respect complete as per instructionby Officer/Site -in-Charge. |
| 102 | Supply & lifting and sprading of soil unifermally over the surface landscape design/advice of the Officer/Site-in-Charge. |
| 103 | Supply,Lifting and Sprading of manure unifermally as per direction by the Officer/Site -in-Charge. |
| 104 | Supply of hedge and edge plant,healthy desease ferr in ply bags/container including transportion and delevery at site.Planning of Duranta Goldian/Durant Verigata(poly) 8'' height 1.e 7 nos per metre at specified location by appilication of fertilizer and pesticide including watering as per instruction by the Officer-in-Charge. |
| 105 | Supply of Plants with all labour ,T & P,Materials and Planting including applying of Utrients/Pesticides (Bio/Organic/Inorganic)all complete as per the instruction by the Engineer-in-Charge. |
| 106 | Supply and Planting of 1.5 to 2 m tall plants -Flowery/Shady etc as per direction of the officer-in-charge. |
| 107 | Supply and Planting of Speciman plants -Flowery/Shady etc as per direction of the officer-in-charge. |
| 108 | Supply and planting of Herbs & Shrubs well developed in big poly bag as per direction of the officer-in-charge. |
| 109 | Supply and planting of Topiary including all labour charges with in all respect complete, as per direction of the officer-in-charge. |
| 110 | Supply and planting of Foxtail Plam Tree including all labour charges with in all respect complete, as per direction of the officer-in-charge. |
| 111 | Supply and planting of Water Lilly Tree including all labour charges with in all respect complete, as per direction of the officer-in-charge. |
| 112 | Supply and planting of Cactus Tree including all labour charges with in all respect complete, as per direction of the officer-in-charge. |
| 113 | Supply and planting of Bonsai Tree including all labour charges with in all respect complete, as per direction of the officer-in-charge. |
| 114 | Supply and planting of Green House Fern Tree including all labour charges with in all respect complete, as per direction of the officer-in-charge. |
| 115 | Supply and planting of Orchid Tree including all labour charges with in all respect complete, as per direction of the officer-in-charge. |
| 116 | Supply and planting of Creepers Tree including all labour charges with in all respect complete, as per direction of the officer-in-charge. |
| 117 | Supply and laying of good quality Grass including all labour charges with in all respect complete, as per direction of the officer-in-charge. |
| 118 | Maintenance of like weeding ,hoeing,pruning,watering etc.for a period of six months after completion of development and establishment of greenery works complete and as per directionby the Officer/Site-in-Charge. |
| 119 | CHILDREN PLAY EQUIPMENT |
| 120 | MGR 4 Seater Big of Size H: 3, DIA : 3.25 ft |
| 121 | See Saw of Size H: 2.8, A: 10 X 2 ft |
| 122 | Funstation of Size H:22, L: 22, W:12ft Play Area 26 x 25 x 14 |
| 123 | Twirly Climber of Size H:7, A 10 x 10 ft |
| 124 | Horse Rider of size H: 2.6 A: 2x 1.5 |
| 125 | Fish Rider of size H: 2.6 A: 2 x 1.5 |
| 126 | Bird Rider of size H: 2.6 A: 2x 1.5 |
| 127 | 4 Seater Sea Saw of Size H: 2.8, A : 10' x 6' |
| 128 | Sand Bed |
| 129 | GYM EQUIPMENT |
| 130 | Air Walker |
| 131 | Sit Up Board |
| 132 | Double Twister Standing |
| 133 | Twister 2 in 1 |
| 134 | Chest Press |
| 135 | Leg Press Double |
| 136 | Sky Walker |
| 137 | Weight Lift |
| 138 | Push up Bars |
| 139 | Surf Board |
| 140 | Horizontal Bar |
| 141 | Cross Trainer |
| 142 | Shoulder Builder |
| 143 | Life size MERMAID in bronze / black granite stone |
| 144 | Budha by sand stone of 18 ft height |
| 145 | Angry Fish by scrap metal |
| 146 | Hungry fish by scap metal |
| 147 | Horse by scrap metal |
| 148 | Bonda adivasi couple with children in scrap metal |
| 149 | Rooster, Frog, Birds in scrap metal |
| 150 | Mural of a them event/story by Terracota/ stoneware/ stone of approved quality size(30'x8') |
| 151 | Lamp post by sand stone/ khondolite |
| 152 | General stone monuments and sculptures |
| 153 | MS and SS Metal sculpture of life size |
| 154 | Metal sculpture of large size |
| 155 | Wooden sculpture of abstract human |
| 156 | S/F of 8 Mtr SST Painted Grouted type Pole (Top -2 1/2'', Middle - 3'' , Bottom - 4'' base plate- 300 x 300 x 5mm)Make - ELEMECH or equivalent. |
| 157 | S/F of 1 Mtr overhang detachable bracket suitable for above 8 Mtr SST pole |
| 158 | S/F of External Juncton Box Material (i.e - Syntax Box with, 10 Amp SP MCB, 63 Amp 4 Pole stud connector..etc) |
| 159 | S/F of 1.5 Sqmm / 3 Core Cu. Flexible Cable for wiring of light fitting from junction box to light fitting. |
| 160 | S/F 8 SWG Coil earthing for Each pole. |
| 161 | Foundation Casting of above Pole (with required steel , Aggregate, Sand and necessary T&P) |
| 162 | S/F of 45W LED Street Light Fitting equivalent to jaquar make item code no - LSRTO1SO45XW or equivalent. (Make - Bajaj / Crompton / HPL / JAQUAR or Equivalent) |
| 163 | S/F of Feeder Panel for Smooth Operation of street Lights. Input - 40 Amp TPN MCCB , with - 40 Amp TP Contactor,and Timer with switch for auto / manual operation..etc) Outgoing 32 Amp SP MCB 6 Nos, Complete with factory wiring. |
| 164 | S/F 50 mm Dia GI Perporated Earthing Pipe with RCC chamber and GI Flat for Earthing of Feeder Panel. |
| 165 | S/L of 4C x 10 Sq mm2 Al. Armoured X LPE Insulated At- Cable with termination. (Make - Polycab / KEI / Mescab / Havels or Equivalent.) |
| 166 | S/F of Flood light fitting within - built LED of IP 65 rated LED Bollard complete with its wiring equivalent to CAT NO-LBLTW-500-WW OF Crompton make complete with its foundation. (Make - Bajaj / Crompton / HPL/Jaquar or Equivalent) |
| 167 | S/F of 15 Mtr SST Painted Grouted type Pole (Top -2 1/2'', Middle - 3'' , Bottom - 4'' base plate- 300 x 300 x 5mm)Make - ELEMECH or equivalent. |
| 168 | S/F of 1 Mtr overhang detachable bracket suitable for above 8 Mtr SST pole |
| 169 | S/F of External Juncton Box Material (i.e - Syntax Box with, 10 Amp SP MCB, 63 Amp 4 Pole stud connector..etc) |
| 170 | S/F of 1.5 Sqmm / 3 Core Cu. Flexible Cable for wiring of light fitting from junction box to light fitting. |
| 171 | S/F 8 SWG Coil earthing for Each pole. |
| 172 | Foundation Casting of above Pole (with required steel , Aggregate, Sand and necessary T&P) |
| 173 | S/F of External Juncton Box Material (i.e - Syntax Box with, 10 Amp SP MCB, 63 Amp 4 Pole stud connector..etc) |
| 174 | S/F 8 SWG Coil earthing for Each pole. |
| 175 | S/F of Feeder Panel for Smooth Operation of street Lights. Input - 40 Amp TPN MCCB , with - 40 Amp TP Contactor,and Timer with switch for auto / manual operation..etc) Outgoing 32 Amp SP MCB 6 Nos, Complete with factory wiring. |
| 176 | S/F 50 mm Dia GI Perporated Earthing Pipe with RCC chamber and GI Flat for Earthing of Feeder Panel. |
| 177 | S/L of 4C x 6 Sq mm2 Al. Armoured X LPE Insulated At- Cable with termination. (Make - Polycab / KEI / Mescab / Havels or Equivalent.) |
| 178 | S/L of 4C x 10 Sq mm2 Al. Armoured XLPE Insulated cable with termination.(Make - Polycab / KEI / Mescab / Havels or Equivalent.) |
| 179 | Earthwork in ordinary soil for excavation of foundation with initial lead of 50m and lift of 1.50m including rough dressing, breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mt in depth. As per direction of Engineer-in-Charge. |
| 180 | Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 30cm in depth. Consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-in-Charge. |
| 181 | Supplying and filling the foundation & plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150cm thick watering & ramming including cost, conveyance, royalty and taxes of all materials, cost of all labours, T & P etc as required for the work complete as per direction of the Engineer-in-Charge. |
| 182 | Providing & laying plain cement concrete 1:3:6(1 cement: 3 sand:6 stone aggregate 20mm nominal size) as levelling course in foundation & plinth etc including tampering, curring, shuttering etc. complete all depth and height including cost, conveyance, royalty and taxes of all materials, cost of all labour, T & P etc as required for the work complete and as direction of Engineer-in-Charge. |
| 183 | Providing and laying in position ready mixed M25 grade concrete having compressive strength at 28 days test not lessthan 250kg/sq.cm for reinforced cement concrete work using cement content as per approved design mix etc including Rigid & smooth centering and shuttering. |
| 184 | Column Base footings |
| 185 | Column |
| 186 | Plinth Beam |
| 187 | Cutting, straightening colled or bent up M.S. rods, HYSD steel or Tor steel or grade Fe-415 confirming to I.S.-1786 - 1985 welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of m.S. rods, HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod, HYSD steel or Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost). |
| 188 | Providing, Fitting & Fixing of Vertified (600 mm x 600 mm) Tiles in floors on 12mm thick Cement Plaster in Cement mortar (1:3) jointed with neat cement Slurry mixed with Pigments including cost of Tiles, labour, T&P all comp. |
| 189 | Providing, Fitting & Fixing of Readymade Benches including cost of materials, T&P, labour, T&P all comp. |
| 190 | Providing, Fitting & Fixing of Structural Readymade Gazebo including cost of Instalation,materials,T&P, labour, T&P all comp. Please Enable Macros to View BoQ information |
