|
| 1 | Construction of tube well after completion of drilling by rotary/ percussion method & upto 100mtr depth in all type of rocks by DTH system as per IS:2800 Part-1 1991 and IS:2800 Part-II 1979(both amended upto date) and technical specifications. The work shall be deemed completed only after obtaining sand free water. The bore well should have a throughout nominal size bore beyond casing pipe : (A) Nominal bore 200mm dia.. (P/2.3.2) |
| 2 | (B) Nominal bore 150mm dia. (P/2.3.1) |
| 3 | Add 15% extra on above item(item no. 2.3.1 to 2.3.3) for drilling depth beyond 100mtr and upto 200mtr from ground level, rte shall be applicable for only extra depth beyond 100 mtr and upto 200 mtr. (P/2.3.4) |
| 4 | P-2/2.11.2: Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) |
| 5 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 6.0 Sq.mm 3 core flat / Round (E-4.7.4) |
| 6 | Providing & Fixing of HDPE pipe Confirming to IS:4984:2021 for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . for vertical installation 40 mm OD 6 kg / cm2(E-21.4.1.1) |
| 7 | Providing & Laying of Polypropylene rope Confirming to IS:5175 for submersible pump of following sizes. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 12mm (suitable up to 50 mm OD pipe)(E-21.3.1) |
| 8 | SITC of Radial / mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034 : 2018 and IS: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe G.I./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 100 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively.2.0 HP, 1-Ø, (7-95)Mtr, (55-22) LPM Copper Wound (E- 21.6.1.3) |
| 9 | 3.0 HP, 1-Ø, (40 -170)Mtr, (60- 20) LPM Copper Wound (E- 21.6.1.4) |
| 10 | SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . For single phase Submersible / Monoblock pump 2.0 HP to 3.0 HP (DOL starter) (E21.13.1.2) |
| 11 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2\\" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug.200 mm dia.(P-2.23.3) |
| 12 | Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. (P-2.22) |
| 13 | S-2/2.39.1:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 15 mm dia nominal bore. |
| 14 | (B) 25mm dia nominal bore |
| 15 | P-2/2.7.1: Deepening of existing tube well by DTH system beyond existing depth up to 100 mtr. and above in all type of rocks including flushing of tube well and obtaining sand free water. : Nominal bore 150 mm dia. |
| 16 | Rewinding of motor of submersible pump set including all necessary material and of the same characteristics as original with required size of super enamelled wire 'E' class insulation material and testing etc. as required. and complete in all respect as per direction of engineer in charge.1.5HP to 3.0HP. The job also includes warranty of winding upto 3 months from date of rewinding or maturity of SD of work, whichever is earlier, including lowering & delowering operation at bore, transportation upto shop required if rewinding of motor attended again within waranty period). |
| 17 | Repair of pump of submersible pump set including changing of required parts like impellor, bush, sleeve, shaft etc. & any other material required for this purpose and testing etc. and complete in all respect as per direction of engineer in charge. 1.5HP to 3.0HP. The job also includes warranty of pump upto 3 months from date of repair or maturity of SD of work, whichever is earlier, including lowering & delowering operation at bore, transportation upto shop required if repairing of pump attended again within waranty period). |
| 18 | Repair of panel board for submersible pump installed at various JPD premises under SWM Circle, including changing/ repairing of capacitor/voltmeter/ ammeter/relay/indicating lamps for start and run position/ any part to make panel board in working condition complete in all respect as per direction of engineer in charge.1.5HP to 2.0HP. The job also includes warranty of panel board upto maturity of SD of work including freight charges of parts with mechanic upto shop required if repairing of panel board attended again within warranty period.). |
| 19 | Labour charges for only delowering of submersible motor pump set, pipes, cables, accesssories etc. from tube well/open well installed at various JPD premises under Sawai Madhopur Circle & transporting the submersible motor to repairing shop/store if unserviceable. The job also includes charges of all T&P, machine & any other material required for this purpose and complete in all respect as per direction of engineer in charge for all lead & lift. |
| 20 | Labour charges for only lowering of repaired submersible motor pump set, pipes, cables, accesssories etc. & transporting repaired submersible motor pump set from repairing shop to tube well/open well installed at various JPD premises under Sawai Madhopur Circle.The job also includes charges of all T&P, machine & any other material required for this purpose and complete in all respect as per direction of engineer in charge for all lead & lift. |
| 21 | P&F steel nipple with nut & bolts for jointing/extending 40mm dia HDPE pipe including all T &P, labour etc as per direction engineer in charge with all lead & lift. |
| 22 | Removing stuck submersible motor pump set at any depth from existing borewell by using temporary tripod pulley and tractor/labour or by any other means. The job also includes charges of all T&P, machine, labour charges & other materials required for this purpose and complete in all respect as per direction of engineer incharge for all lead & lift. |
| 23 | Changing of internal connection cable/mechanical seal/thrust bearing plate etc of submersible complete in all respect as per direction engineer incharge. 1.5HP to 2.0HP. The job also includes warranty of changed part upto maturity of SD of work. |
| 24 | Flushing of existing tube well upto 300 mtr. deep installed in JPD premises under Sawai Madhopur Circle as per IS specification using suaitable comperessor including all T&P, required for this purpose. The work would be completed after obtaining sand free water complete in all respect for all lead and lift as per direction of Engineer in charge. Please Enable Macros to View BoQ information |
