|
| 1 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 2 | Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead. |
| 3 | Dismantling kerb stone channel by manual means and disposal of dismantled material with all lifts and upto a lead of 1000 metre as per MORTH Specification 202 |
| 4 | Cleaning of the existing black topped surface with brooms soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. etc. Complete |
| 5 | Filling of potholes with bituminous concrete and removal of all failed material trimming of completed excavation to provide firm vertical faces cleaning of surface painting of tack coat with 0.24 kg/sqm on the sides and base of excavation as per Clause 503 back filling the pot-holes with hot bituminious material @ 4.59 kg/sqm to an average thickness of 40 mm as per clause 504 compacting trimming and finishing the surface to form a smooth continous surface all as per per MORTH Specification 3004.2>Grade - I ( 19 mm nominal size) |
| 6 | Providing and laying 50mm(consolidated thickness)full grout using granitic or basaltic stone of specified grading at 6.00 cu.m. per 100 sq.m. grouting with hot bitumen straight run bitumen(or with such bituminous material of grade and type as specified by the Engineer-in-Charge)at 5.0kg. per sq. m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m. including Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu.m. bucket capacity to the specified levels grade and cross fall using Type A seal coat with 0.98 kg/sqm of bitumen of grade as per MoRT&H specifications clause 513. |
| 7 | Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503.>Bitumen 80/100@ 0.375 kg/sq.m |
| 8 | Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503.>Bitumen 80/100 @ 0.20 kg/sq.m |
| 9 | Providing and laying bituminous macadam with 40-60 TPH hot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder to the specified percentage of total mix transported to site with all leads laid over a previously prepared surface with sensor paver finisher to the required grade level and alignment and rolled with smoth wheeled roller and vibratory roller to achieve the desired compactionusing antistripping agent complete as per MoRT&H Specifications Clause 504>Grade-II (19mm nominal size)@3.3% of Bitumen-mix>Antistripping agent @ 0.5% of bitumen content |
| 10 | Providing and laying bituminious concrete with 40-60 TPH Drum Mix type Hhot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading premixed with bituminious binder to mix with filler transporting the hotmix to work site with all leads laying with a hydrostatic/hydraulic paver finisher with sensor control to the required grade level and alignment using antistripping agent rolling with smooth wheeled vibratory or tandem rollers to achieve the desired compaction complete as per MoRT&H Specifications Clause 509>Grade-II (13mm nominal size) @ 6.0% Bitumen of grade 60/70>Antistripping agent @ 0.5% of bitumen content |
| 11 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803 |
| 12 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 13 | Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering shuttering and finishing in:>All works upto plinth level |
| 14 | Providing & laying of minimun 60mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand filling the joints with coarse sand etc. all complete as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant.Size: 150mm x 150mm x 60 mm (Type: Square Shape)>Other Colours |
| 15 | Providing and and laying rustic floor tiles (rectified) 374 x 374 mm of Johnson Somany Kajaria or equivalent (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc. complete>Light Shades |
| 16 | Supplying and fixing Pre-cast cement concrete kerb-stones(factory madethe factory should be ISO certified and registered under Dirctorate of Industries Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification.>Size 30 cm L x 40 cm H x 15 cm T |
| 17 | Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces) |
| 18 | Supplying and fixing of Precast RCC slabs(factory madethe factory should be ISO certified and registered under Dirctorate of Industries Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate consolidated by means of mechanical platform vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge.>Size 600 x 500 x 75 mm with steel reinforcement not less than 2.25 kg per unit Please Enable Macros to View BoQ information |
