|
| 1 | Earthwork in cutting or in embankment in ordinary soil excavation to be in the form of regular pit not exceeding 1/2m (20'') in depath and earthwork in embankment to be 20cm(8'') layer including ramming and dressing the surface to required levels and slopes and also including 1.5m lead. The earth form cutting to be used in making embankment or to be deposited on spoil banks with in 30m (100')distance as directed by the engineer incharge as per SI No 253. |
| 2 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. |
| 4 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 5 | Providing and Appluing Primer coat with emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and Spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specifications Clause 502 |
| 6 | Providing and applying tack coat with (RS-1)Bitumen emulsion using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 7 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a su |
| 8 | Providing and Laying seal coat sealing the voids in a bituminous surface using VG-10 laid to the specified levels, grade cross fail Type c, as per Technical Specification |
| 9 | Brick edging 7 cm wide on both sides of the road With Staraight over burnt bricks complete as per PWD specification no. 20.15 |
| 10 | supply of hume pipe 250mm |
| 11 | laying & fixing of hume pipe 250mm |
| 12 | Supply and fixing of informatory M.S. sign board size 1.20x0.90 mtr made of 18 gauge M.S. sheet in ISA 40x40x5 mm fraim supported in back side of 40x5 mm flat iron or on all of 2.15 mm with 150 mm long horizontal log (hold fast) at bottem braced with 40x5 |
| 13 | Provision of inauguration or Opening project including diging foundation layig c,c, in 1:6:12 as per S.I.No 273, brick work in 1:4 with S.I. No 305a, plaster in 1:4 with S.I. No 584. and snowcem S.I. No 660 including fixing 60x75 cm sixe 20 mm thick gran Please Enable Macros to View BoQ information |
