|
| 1 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead (DSR No.15.26) |
| 2 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead (DSR No.15.27) |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below (DSR No.15.12.1) |
| 4 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.(DSR No.15.25) |
| 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar (DSR No.15.7.4) |
| 6 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge (DSR No.15.3) |
| 7 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. (DSR No.14.79) |
| 8 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead (DSR No.15.52) |
| 9 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. (DSR No.14.82) |
| 10 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge. 15 mm to 40 mm nominal bore (DSR No.15.44.1) |
| 11 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead 100 mm dia pipe (DSR No.15.42.2) |
| 12 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR No.15.60) |
| 13 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. (DSR No.2.8.1) |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40mm nominal size derived from natural sources) (DSR No.4.1.10) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR N.6.1.2) |
| 16 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) (DSR No. 4.10) |
| 17 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil (DSR No.4.13) |
| 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR No.6.4.2) |
| 19 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) (DSR No.6.13.2) |
| 20 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) (DSR No.13.7.2) |
| 21 | 15 mm cement plaster on rough side of single or half brick wall of mix (DSR no.13.5.2) |
| 22 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate) finished with a floating coat of neat cement, including cement slurry,but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (DSR No.11.3.1) |
| 23 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(DSR No. 5.3) |
| 24 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR No.5.2.2) |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform (DSR No.5.9.3) |
| 26 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts (DSR No.5.9.6) |
| 27 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.(DSR No.5.22.6) |
| 28 | Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 12.15.1 With residual type petroleum bitumen of grade VG -10 (DSR No.12.15.1) |
| 29 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat : With common burnt clay F.P.S.(non modular) brick tile of class designation 10 (DSR No.12.16.1) |
| 30 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75mm deep chase (DSR No.12.21.1) |
| 31 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR No.12.22) |
| 32 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent (DSR No.11.56.1) |
| 33 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.(DSR No.8.5) |
| 34 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 500x500 mm (DSR No.11.48.1) |
| 35 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/ Ruby red. Area of slab over 0.50 sqm (DSR No.8.2.2.2) |
| 36 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR No.8.31) |
| 37 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.(DSR No.16.90) |
| 38 | Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): Flush/ Ruled/ Struck or weathered pointing (DSR No.13.32.1) |
| 39 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(DSR No.13.80) |
| 40 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR No.13.41.1) |
| 41 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR No.13.46.1) |
| 42 | 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. Decorative finish (wood grained finish)(DSR No.9.142.2) |
| 43 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. (DSR No.9.141) |
| 44 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (weight not less than 10 kg/ sqm) (DSR No.10.30.1) |
| 45 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm (DSR No.9.100.1) |
| 46 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm (DSR No.9.97.1) |
| 47 | 250x10 mm (DSR No.9.97.2) |
| 48 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper (DSR No.9.101.2) |
| 49 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR No.17.1.1) |
| 50 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR No.17.2.1) |
| 51 | P/F vitreous china ware star white colour under counter wash hand basin of size of 56x43cm Hind ware make model no 10049 or any equivalent make parry ware etc as per instruction of EIC including cost of wicking make cp 32mm waste, chair type adjustable brackets, Jaquar 167/B nova make central hole mixer including the cost of cutting granite for WHB and making hole in granite for fixing mixer, plugs, screws, white cement, complete in all respect.(NSI) |
| 52 | Providing and fixing of Chrome plated stainless steel Grab rail for disabled person in Toilet Block complete in all respects as height 2'-6\\" with minimum clearance 2\\" from wall/washbasin to the entire satisfaction of EIC. (NSI) |
| 53 | Providing and fixing of Urinal Partition 10mm thick Toughned Glass frosted both sides of size 3x1.5 fixed in position with clamps holdings the glass. All exposed edges to be grined with smooth finish to the entire satisfaction of Engineer in charge including carriage of materials to site of work.(NSI) |
| 54 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (DSR No.17.16A) |
| 55 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR No.17.31) |
| 56 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern (DSR No.17.4.1) |
| 57 | Providing and fixing CP brass auto closing concealed urinal press matic taps complete in all respect as per the entire satisfaction of Engineer in charge (NSI) |
| 58 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore (DSR No. 18.16.1) |
| 59 | Providing and fixing of CP stainless steel bib cock, Pressmatic Taps of approved make complete in all respect as per the entire satisfaction of Engineer in charge. (NSI) |
| 60 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.(DSR No.17.71) |
| 61 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.(DSR No.17.72) |
| 62 | Providing and fixing toilet paper holder : C.P. brass (DSR No.17.34.1) |
| 63 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore (DSR No.18.11.1) |
| 64 | 20 mm dia nominal bore (DSR No.18.11.2) |
| 65 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore (DSR No.18.12.3) |
| 66 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore (DSR no.18.47.1) |
| 67 | 20 mm nominal bore (DSR No.18.47.2) |
| 68 | 25 mm nominal bore (DSR No. 18.47.3) |
| 69 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. (DSR No.18.78) |
| 70 | Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 (DSR No.17.35.1.1) |
| 71 | 75 mm diameter : Sand cast iron S&S pipe as per IS: 1729 (DSR No.17.35.2.1) |
| 72 | Providing and fixing collar : 100 mm Sand cast iron S&S as per IS - 1729 (DSR No.17.57.1.1) |
| 73 | 75 mm Sand cast iron S&S as per IS - 1729 (DSR No. 17.57.2.1) |
| 74 | Providing and fixing Drip Seal Joints for HCI pipes of size 75 mm including the cost of yarn, caulking complete in all respect sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameter (NSI) |
| 75 | Providing and fixing Drip Seal Joints for HCI pipes of size 100 mm including the cost of yarn, caulking complete in all respect sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameter (NSI) |
| 76 | Providing and fixing plain bend of required degree : 100 mm dia Sand cast iron S&S as per IS - 1729 (DSR No. 17.39.1.1) |
| 77 | 75 mm dia Sand cast iron S&S as per IS -1729 (DSR No. 17.39.2.1) |
| 78 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729 (DSR No. 17.60.2.2) |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes (DSR No. 18.8.1) |
| 80 | 25 mm nominal outer dia Pipes (DSR No. 18.8.2) |
| 81 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks (DSR No. 18.76.1) |
| 82 | Providing and laying of water proofing compound (special quality) on roof (NSI) |
| 83 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand 100 mm dia pipe (DSR No.17.61.1) |
| 84 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof (DSR No.18.77) |
| 85 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No.19.30.1.1) |
| 86 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.4.1.1) |
| 87 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps 150 mm diameter (DSR No.19.5.2) |
| 88 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter (DSR No. 19.1.2) |
| 89 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe (DSR No.19.2.2) |
| 90 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For pipes 100 to 250 mm diameter (DSR No. 19.21.1) |
| 91 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia (DSR No.2.10.1.2) |
| 92 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore (DSR No. 18.17.1A) |
| 93 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore(DSR No.18.18.3) |
| 94 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (DSR No.18.48) |
| 95 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. (DSR No.18.53A) |
| 96 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (DSR No. 17.22.A) |
| 97 | Providing and fixing 100 mm sand cast Iron grating for gully trap.(DSR No.17.29) |
| 98 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore (DSR No.18.21.2.1) |
| 99 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc For 100 mm dia pipe (DSR No.17.37.1) |
| 100 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia (DSR No.17.28.1.1) |
| 101 | Providing and fixing of Crompton Greeves 1 HP water pump with help of fasteners to be fixed at site as per entire satisfaction of Engineer in charge (NSI) |
| 102 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (DSR No.9.84) |
| 103 | Providing and installation of sanitary napkin vending machines with sanitary napkin pad (1 Box = 200 pads). The cost include basic cost of equipment, taxes, delivery charges, training charges & warranty of 12 months complete in all respect. (NSI) |
| 104 | Providing and installation of sanitary napkin incinerator for the disposal of sanitary napkin pads of approved quality complete in all respect as per the entire satisfaction of Engineer in Charge. (NSI) |
| 105 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand (Recycled Concrete Aggregate), filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (NSI based 16.68) |
| 106 | Providing and fixing of wall mounted Touch-free infrared activation Steel Hand dryer, 65 Decibel noise level, width 200 millimeter Height 300 millimeter length 200 millimeter with hand dry time less than 20 sec for without heater element, motor speed in range 15001 - 30000 rpm with 900 watt Rated power and 1 year warranty. Make: Cronax/ Euronics/ Dyson/ Technocrat/ Dryflow (NSI) |
| 107 | Providing and fixing of exhaust fan of 12\\" of reputed make with metallic blades make of Crompton/Bajaj heavy duty complete in all respect as per the satisfaction of Engineer in charge. (NSI) |
| 108 | Providing and fixing of ceiling fan of 48\\" of reputed make of Usha/Crompton/ Khaitan complete in all respect as per the satisfaction of Engineer in charge. (NSI) |
| 109 | Providing and fixing of tubelight 4', 1x40 watt type Usha/ Havells/ Philpis complete in all respect as per the satisfaction of Engineer in charge.(NSI) |
| 110 | Providing and fixing of concealed type fitting in walls including the cost of CFL 32 W lamp box, fitting complete in all respect as per the satisfaction of Engineer in charge.(NSI) |
| 111 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (E&M DSR No.1.3.2)Group B |
| 112 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required Group B (E&M DSR No.1.6) |
| 113 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required 5/6 amps switch (E&M DSR No1.23.1) |
| 114 | 15/16 A switch (E&M DSR No 1.23.3) |
| 115 | 3 pin 5/6 A socket outlet (E&M DSR No 1.23.4) |
| 116 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole (As per Elect. DSR No. 2.10.1) |
| 117 | Double pole and neutral (As per Elect. DSR No. 2.10.2) |
| 118 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 6 way, Double door (As per electrical DSR item no 2.3.1) MCB Box |
| 119 | Earthing of sheet / iron clad switches & metallic cases with no 8 SWG (4mm dia) GI wire in 15 mm dia GI pipe partly recessed & party on surface complete 135 cm long 50mm dia GI earth pipe with GI reducing socket including erection of 4 mtr below ground level with necessary charcoal salt mixture etc upto 9 mtr in length (including boring & refilling) (NSI) |
| 120 | 100 mm X 100 mm X 60 mm deep (As per Elect. DSR No. 1.22.2) |
| 121 | 200 mm X 125 mm X 60 mm deep (As per Elect. DSR No. 1.22.6) |
| 122 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm (As per Elect. DSR No. 1.21.2) |
| 123 | Providing and fixing of 50 Watt LED Flood light with bracket outside on the wall complete in all respect as per the entire satisfaction of Engineer in Charge (NSI) |
| 124 | Providing and fixing of acrylic multiligual Braillc (raised dots) Directional Signboards of size 6\\"X9\\" designed as per accssibility standerd and having 3 mm thick acrylic base plate with Upper case San Serif words made of white acryrlic non flare cut out letters of height 15 mm raised not less than 0.8 mm above base plate and the equivalent word written in Hindi with Devanagri non flare acrylic letter of height 15mm raised not less than 0.8 mm above base plate and having a non glare acrylic cut arrow pointing in the glae acrylic cut arrow pointing in the required direction. Each signboards to be fixed as per manufacturers specifications on the wall at the approval locations and at a height of 1200 mm from FFL complete as per design/ specifications and guidlines as per entire satisfication of EIC. (NSI) |
| 125 | Providing and placing Round shape plastic flower POT (Gamla) size 12\\" dia Green in colour including decorative plant for outdoor decoration. (NSI) |
| 126 | Providing and placing HDPE waste cantainer for wet and dry waste of capacity 20 Ltr with foot pedestal operated opening lid (NSI) |
| 127 | Providing and fixing of Acrylic sheet with silver remark engraving plate 24\\"x24\\" in position at required place to the entire satisfaction of Engineer in charge. (NSI) |
| 128 | Providing and fixing of Acrylic sheet with silver remark engraving plate 12\\"x12\\" in position at required place to the entire satisfaction of Engineer in charge (NSI) |
| 129 | Providing and fixing of Acrylic sheet with silver remark engraving plate 48\\"x24\\" in position at required place to the entire satisfaction of Engineer in charge (NSI) |
| 130 | Providing and fixing a disabled person toilet alarm kit (comprising an over-the-door/wall light and sounder, one toilet reset switch, ceiling/wall pull unit with pull cord, and disabled WC sticker). The system operates by simply pulling the cord to activate the sound alarm and over-door light outside the toilet (pull cord length more than 275 cm). The alarm system should consist of a red pull cord with red bangles of 50 mm diameter, with one bangles at a height between 800 mm and 1000 mm, and the other at 100 mm above floor level. Complete set in all respects, as per the direction of the Engineer-in-charge (NSI) |
| 131 | providing and fixing of Emergency distress button (waterproof) inside barrier-free toilet, along with a siren sound louder than 120 dBA, and blue/red strobe flashing light. Rated voltage/current: 12VDC/120mA, power adapter input voltage: 110-120 VAC, output voltage: 12 VDC/3A (36W) Complete set in all respects, as per the direction of the Engineer-in-charge (NSI) |
| 132 | Designing, providing and fixing of aluminum composite glowing sign board of clear size 5’ x 1’-3’’ after moulding 3” both side made out of size 5’ x 1’-9’’ sheet having thickness 3mm, CNC Router Cut Letters Acrylic sheet 2.8mm with CNC laser cut, MS SQ pipe 42mm o/d having 1mm thick, 3mm thick sun board box for housing glowing LEDs module, backside board covered with 2mm ACP sheet, LED Module and water proof power supplies, installation at specific height by fixing with 2 No. L-type brackets and 2 No. flat brackets on wall i/c cost of anchor bolts and electrical wiring with making connection with switch boards at site including loading, unloading, carriage & labour charges complete in all respects (NSI) |
| 133 | Providing and fixing of Customer Feedback device having 3 No. push buttons, metal body, wall mounted machine use for giving rating on Public Toilet including terminal box, electrical paints, wiring complete in all respects. (NSI) |
| 134 | Providing, fixing, testing, commissioning of solar panel based inverters 165W Polcrystalline Module Battery 180 Amp. Invertors 800VA with invertors stand including cost of wiring, construction of panel stand on roof top complete in all respects as per satisfaction of EIC. (NSI) |
| 135 | Providing and fixing ABS material wall mounted cylindrical shaped liquid soap dispenser of capacity of 500ml and complete in all respect as per the entire satisfaction of Engineer in Charge. (NSI) |
| 136 | Providing and fixing wall mounted ABS Plastic Bottom Napkin Dispenser with Maximum 200 Number Of Wipes with dimension 250 mm length, 75 mm width, 260 mm height complete in all respect as per the entire satisfaction of Engineer in Charge.(NSI) |
| 137 | NOTE:-Credit against old MS steel bar |
| 138 | Credit against old MS doors, ventilators, windows etc (NSI) |
| 139 | Credit against old Roof tiles |
| 140 | Credit against old bricks Please Enable Macros to View BoQ information |
