|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m . All kinds of soil.(DSR No.2.8.1) |
| 2 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : of Make :- ELECTRO STEEL/ JINDAL/ TATA /Welspun 100 mm dia Ductile Iron Class K-7 pipes (DSR No.18.72.1) |
| 3 | 150 mm dia Ductile Iron Class K-7 pipes (DSR No.18.72.2) |
| 4 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket :100 mm dia pipes (DSR No.18.70.1) |
| 5 | 150 mm dia pipes (DSR No.18.70.2) |
| 6 | Labour for cutting C.I. pipe with steel saw100 mm diameter C.I. pipe (DSR No. 18.83.2) |
| 7 | 150 mm diameter C.I. pipe (DSR No 18.83.4) |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m (DSR No.2.25) |
| 9 | Supplying and filling of fine sand Recycled Aggregate (RA) under floors including, watering, ramming consolidating and dressing complete. Inn all respects (sand will be taken from C&D waste plant wof M.C. (Based on DSR I. No. 2.27). (NSI) |
| 10 | Carriage of materials by mechanical transport including loading, unloading and stacking of earth upto 5 Km : Earth (DSR No.1.1.2) |
| 11 | Extra cutting through metalled road and their foundation including sorting screening ans stacking at the site. Complete in all respects (NSI) |
| 12 | Providing and fixing of DI/ CI specials ISI marked complete including cost of rubber gasket, solvent solution etc. complete in all respects (NSI) |
| 13 | Making ferrule connection including cost of ½” G.M.ferrule -1No., Elbow 1/2” x ¾: =1No., Elbow ¾” = 1No. Nipple ¾” x 12” – 2no., Union ¾” -1 no. , GI pipe ¾”-3.50m approx, excavation, dewatering, drilling, taping of newly laid water supply pipe line etc complete in all respect as per site requirement. (NSI) |
| 14 | Supplying, laying, jointing & testing, commissioning of D.I. Sluice Valve Resilient seated including the cost of rubber packing, nut & bolts, carriage, loading unloading complete in all respects make: VAG/ AVK/ IVC/ Kirloskar/ /Tails. D.I. 100mm i/d (NSI) |
| 15 | D.I. 150mm i/d (NSI) |
| 16 | Construction of brick masonary chamber for sluice valve including excavation Ist class brick work in cement sand mortar 1:6 etc complete in all respect as per entire satisfaction of Engineer in Charge of size 3'x3'x4' inner (NSI) |
| 17 | Providing and fixing of RCC cover 1:2:4 of 3\\" thickness including cost of steel winding wire etc complete in all respect as per entire satisfaction of Engineer in Charge (NSI) |
| 18 | Labour for making arrangements for connection with existing line including cost of execution, cutting, jointing alignment, dewatering, caution board etc complete in all respect.Exsting 6\\" i/d to proposed i/d 6\\" (NSI) |
| 19 | Making Scour arrangement on 4\\" DI pipe line including cost of CI Tee (S/F) 4\\"x4\\"x4\\" 1 No. CI collar 4\\" i/d = 1 No. DI Sluice Valve = 1 No. (VAG/ AVK/ IVC), CI tail piece (S/F) = 1 No. Pig lead, hemp yarn, rubber sheet, nut bolt, excavation, dewatering cutting of exisiting pipe, jointing, tetsting etc. complete in all respect as per the entire satisfaction of Engineer in Charge. (NSI) |
| 20 | Providing plain cement concrete thrust block 1:2:4 of including cost of cement, sand, bazri, labour etc. complete in all respects based in DSR item 4.1.3 size 2'6\\" x 2'0\\" x 1'6\\" (NSI based on DSR No.4.1.3) |
| 21 | Disconnection of existing CI water supply lines to make new provided lines proper functional cost of providing CI tail piece (F/P) = 1 No. , MS Flange = 1 rubber hern, nut bolt complete in all respect4\\" i/d (NSI) |
| 22 | 3\\" i/d (NSI) |
| 23 | Repair of Damaged Sewer connection including lost of cutting jointing and hunching etc complete in all respect as per the entire satisfaction of Engineer in Charge (NSI) |
| 24 | Providing and fixing of Compond pressure gauge 100mm dia including drilling the MS pipe, stop cock etc complete in all respect as per the entire satisfaction of Engineer in Charge (NSI) |
| 25 | Note :- (i) Less against C l Scrap @Rs. 40/ Per Kg (ii) If JCB will be provided by Deptt. (Govt. JCB) in repair work then recovery will be made @Rs.850/-Hr Please Enable Macros to View BoQ information |
