|
| 1 | Name of Items |
| 2 | Pump House |
| 3 | Earth work: Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.5m lead upto 30m including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal & disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30m from the foundation trenches. |
| 4 | P/l cement concrete with 1:6:12 in foundation including supply of all the material labour T&P complete with 40 mm gauge brick ballast |
| 5 | Class-150 brick work in 1:6 cement and fine sand of 1:25 fineness modulous mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work .Ch-6 SOR 23 S.I.No. 1 |
| 6 | 25 mm thick damp proof course with cement and approved course sand 1:2:4 ( 1 cement : 2 coarse sand : 4 stone grit) 12.5 mm gauge nominal size.Ch-7 SOR 23 S.I.No. 1 |
| 7 | Class-150 brick work in 1:4 cement and Coarse sand Mortar for one brick thick wall in the super structer.Ch-6 SOR 23 S.I.No. 2 |
| 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :1 Cement mortar 1:4 (1 cement : 4 coarse sand)Ch-6 SOR 23 S.I.No. 6 |
| 9 | RCC work with cement approved coarse sand and 2cm (3/4\\")gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates)in raft foundation and footing including bending of reinforcement and binding with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete. |
| 10 | RCC work with cement approved coarse sand and 2cm (3/4\\") gauge approved stone grit in the proportion 1:2: 4 but in lintal and Sun shade |
| 11 | RCC work with cement approved coarse sand and 2cm (3/4\\") gauge approved stone grit in the proportion 1:1½: 3 but in lighter beams having spans upto 6 metrs. |
| 12 | RCC work with cement approved coarse sand and 2cm (3/4\\") gauge approved stone grit in the proportion 1:1½: 3 but in SLAB |
| 13 | RCC work with cement approved coarse sand and 2cm (3/4\\") gauge approved stone grit in the proportion 1:1½: 3 in R.C.C Column all complete. |
| 14 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work wrought to reinforced shape as necessary including bending for proper completion of work. |
| 15 | Mild steel or iron work of small size and holding down bolts, hold, hold fast, tie rods grating etc.wrought to required shape as necessary . |
| 16 | (i) Fabricatoin of holes, Door, chaukhats Nosing |
| 17 | (ii) Fabricatoin of Grill/Stairs case railing. |
| 18 | (iii) Fabricatoin of Z- Section steel windows. Including necesssary steel fitting such as handles stay etc. |
| 19 | Mild steel or iron in work in heavy size such as trusses. Build up gates record racks, roof work, gates etc wrought to required form all complete. |
| 20 | P/Fixing pans & Hexagonal fans box including supply of all materials. Ch-19 SOR 23 SI.No.6 |
| 21 | Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone grit) 40 mm gauge for fixing of hold fast including supply of all matrial labour T & P etc. required for proper complete of work. |
| 22 | 12 mm thick cement plaster 1: 4 (1 Cement 4 fine sand ) in single coat on fair side of single or half brick wall for interior plastering upto floor two level including supply of all matrials labour T & P etc. all complete. |
| 23 | 15 mm thick cement plaster 1: 4 (1 Cement 4 fine sand ) in single coat on fair side of single or half brick wall for interior plastering all complete. |
| 24 | 20 mm thick cement plaster 1: 3 (1 Cement and 3 C sand mortar) DSR SI No.13.9.2 DSR Rate 587.20 X 0.735 X (112/107) = 451.76 / - |
| 25 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the costof nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate. |
| 26 | P/Fixing glass strips including supply of all materials. (22 mm) |
| 27 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestorywindows, all complete with :4.0 mm thick glass panes CH-10 SOR 23 SI No. 26/10.3.1 |
| 28 | Supply and fixing of PVC SWR ring fit (as per IS 13592 with latest 84amedments) type-A) phenolex prince suprime make soil waste and vent pipe dia 110 mm (OD) PSR |
| 29 | Earth filling incluing supply of necessary quantity of Earth form a distance exceeding 5 kms. Form the site of work and including watering dressing etc. labour and T & P etc. required for the proper competion fo the work. |
| 30 | Sand Filling in plinth including supply of necessary quantity of sand |
| 31 | Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. (Ch-10 SOR 2023-24 SI.No-30/New) |
| 32 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat. |
| 33 | Painting two coat over priming coat on iron works in small areas or new wood work with one coat of ready mix priming paint and two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all material Labour & T&P etc. required for proper complete of work paint to be used should confirm to the ISI no 103 1950. |
| 34 | Water supply and Sanitary Fittings (staff quarter) |
| 35 | Chlorinated Polyvinyl Chloride (CPVC) pipes.having thermal stability for hot & 15 mm nominal outer dia Pipes |
| 36 | P/ Fixing brass Bib cock 15 mm heavy quality weigast 200 Gram incluing supply of all materials, labour, T&P etc. and including threading the pipe if requried for proper complete of the work . |
| 37 | Same as item no.2 but for stop cock heavy size. CH-23 SOR 23 SI No.9 |
| 38 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessar holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 39 | Construction of chamber of Internal size 046mx0 45x0.45m with class 150 B/W in 1:4 cement and coarse sand morter base concrete 1:5:10 (1 cement: 5 coarse sand: 10 Brick ballast 40 mm size) 12mm thick plaster in 14 cement and coarse sand morter with neat finished and 8cm thick PCC 124 (1 cement 2 coarse sand 4 stone grit 20 mm size in floor and cunet including RCC. Cover with 8.0cm thick including cost of all material, labour T&P etc required for proper completion of the work (A/R) |
| 40 | Supply and fixing of ISI mark parrywater/ Jonshon / Cerra make Orrisa pattern WC pan size 580 mm of approved quality including 10 lit capacity low level PVC Cistern with all accessories. The rate is inclusive of supply and fixing of WC pan-1 no, low level cistern PVC 10 lit capacity-1 No, SWR P-trap-1 No, Flush pipe 30 mm dia PVC (of approved make- 1 PVC connection of heavy duty (appropriatelength) and fixing is to done in cement concrete 1:2:4 (1 cement, 2 coarse sand 4 stone grit 20 mm size) along with all other consumables necessary for fixing etc. complete required for proper completion of the work as per direction. of E/I. AR AS PER DSR 17.1 |
| 41 | Supply and fixing of PVC SWR ring fit (as per IS 13592 with latest 84amedments) type-A) phenolex prince suprime make soil waste and vent pipe dia 110 mm (OD) PSR |
| 42 | Making House connecting chamber size 600mm x600mm x600 mm with class 150 B/W in 1:4 cement and coarse sandmorter base concrete 1:5:10 PSR |
| 43 | Electrification of Staff Quarter |
| 44 | Wiring for light point with 1.5 sqmtr FR PVC insulated multistrand single core copper conductor cable in heavy guage rigid PVC conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting complete with 1.5sq mm FR PVC insulated multistrand copper, conductor cable as earthwire drewn inside piano type switch & celling rose/angle/battem holder on 3mm thick phenolic paminated sheet etc. complete in all respect as directed including matching colour wash |
| 45 | Same as above but for fan as per (SI. No. 140 c) |
| 46 | Same as above but for plug as per (SI. No. 141c) |
| 47 | S&F of 4 way 16 A SPN metal clad rewire able type distribution fuse board complete with 32A/240A SPN metal clad rewire able type switch fuse on M.D.F.E.G /Teak wood board complete in all respects. (S.I 364 Cat B) |
| 48 | Supply and burying of 600x600x6 mm GI plates vertically for earthing with its top at least 3 metres below ground leveas complete with 20mm dia G.I pipe and funnel for watering and one earthing lead of one no. 8 to10 SWG GI Wire in 15mm dia G.I pipe upto swictch board ( from appron to switch board the cost of G.I pipe & G.I wire will be extra)30cm square C.I frame with hinged cover masonry housing alternate layers of charcotion/coke and salt at least 150mm thick alround etc. as per direction of Engineer in charge complete in all respects. (SI. No. 703) |
| 49 | Construction of Resses 480x480x200 mm size for fixing of main boards, disribution boards of all sizes including cutting of brick work providing lintel of suitable labour T&P for proper completion of work.(1141A) |
| 50 | Supply and Fixing single leaf factory MS cover with mounting frame for 600x480x200mm size sunk fabricated from 18 SWG M.S sheet duly painted with red oxide primer followed by two coats of synthetic enamel spray paint complete with steel almirah type handle & locking arrangements & fixed with hold fasrs etc. including supply of all material labour and T&P etc. required for proper completion of work. |
| 51 | S/Wiring of submain with two number 2.5 sqmm FR PVC insulated 1100 volts grade multistand single core copper conductor cable in 20 mm heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 1 number 1.5 Sqmm FRLSHinsulated 1100 v gread multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect. |
| 52 | Supply & fixing fluorescent 1x20/1x18 watt tube light complete including tube etc. on surface complete in all respects. |
| 53 | WATER LINE |
| 54 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. PSR |
| 55 | Supply, Laying & Jointing of follwing dia D.I . Pipe |
| 56 | 150mm dia |
| 57 | 250mm |
| 58 | Providing and fixing of follwing dia C.I. sluice valves(with cap) complete with bolts, nuts, rubber insertionsetc. (the tail pieces if required will be paid separatelysanctioned rate of PMAY sec 3& 4 |
| 59 | 150 mm dia |
| 60 | 250 mm dia |
| 61 | Construction of 1.00 x1.20x1.50m internal size manhole as per standard design and specification of KDA & including 30 cm thick cement concrete 1:4:8 base & channel, brick work one & half brick work thick in 1:4 cement & coarse sand mortar 12 mm thick cement plaster in 1:4 cement & coarse sand mortar & with neat cement finish including 18 mm square M.S bar foot rest embedded with 1:2:4 cement concrete at 23 cm centre to centre and 15 cm thick RCC slab with 1:1.5:3 cement , coarse sand and 2 cm gauge stone grit with including ferro cement seat and ferro cement cover floor with 1:2:4 cement concrete all complete as per of Engineer in charge of work (height will be measured from invert of pipe to bottom of the seat) |
| 62 | Providing and laying DI specials of class - K12 suitablefor push and joint as per IS:9523 DSR 18.68.1 PSR |
| 63 | Providing push on joints for DI pipes of following dia |
| 64 | 150 mm dia |
| 65 | 250 mm dia Please Enable Macros to View BoQ information |
