Tender For Work Of Thematic Development Of Hastinapur Road In Meerut District., Meerut-Uttar Pradesh

TDR : 55426980

Tender Notice
BOQ

6 Days Left

Meerut , Uttar Pradesh

Tender Brief : Tender For Work Of Thematic Development Of Hastinapur Road In Meerut District.

Document Fees
₹ 5700 /-

EMD
₹ 12533000.0 /-

Tender Value
₹ 62.66 Crore /-

Submission Date
29-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	DEMOLITION WORKS
2	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
3	Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar
4	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
5	Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
6	Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
7	PROPOSAL WORK
8	Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. All kinds of soil
9	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Ditance upto 25 km
10	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
11	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
12	Brick work with common burnt clay F.P.S. (non modular) bricks of class -150 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
13	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)
14	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for thefollowing grades of concrete. For Foundation
15	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for thefollowing grades of concrete. For SuperStructure
16	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more
17	12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
18	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
19	Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
20	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge
21	60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern
22	62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
23	Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.
24	Providing & fixing of Quartz Cobble Stone Paving Size 100x100x 100 mm including filling of mortar in joints & 40 mm thick base including all necessary T&P all complete in direction of engineer in charge.
25	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
26	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
27	40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.
28	Providing and laying Ceramic glazed floor tiles of size 300x300 mm( thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
29	Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone
30	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - exposed face fine dressed with rough backing. 30 mm thick
31	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
32	Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
33	Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of differentfinished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigmentof matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
34	Cost of Center Scuplture
35	EXTERNAL ELECTRIFICATION & LANDSCAPE LIGHTING
36	Supply & Fixing of’ 5mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket single arm for mounting of 1nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output>110lmn/watt. Design as per Architect in charge. (Make - Twinklelite/ wipro/ K Lite/ Luster)
37	Supplying Testing & Installation of Led Flood Light Luminaire 50W Philips Make Model - BVP 140 Led 50 CW PSU WH/ Wipro/ Luster etc all complete of direction of engineer in charge.
38	Supplying Testing & Installation of Led Flood Light Luminaire 100WV Philips Make Model- BVP 142 Led 100 CW PSU WH / Wipro/ Luster etc all complete of direction of engineer in charge.
39	Supply and fixing of decorative 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect.
40	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
41	Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
42	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brassn nut bolt & spring washer spaced at 50mm)
43	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
44	6.00 Sqmm 4 Core
45	25.00 Sqmm 3.5 Core
46	70.00 Sqmm 3.5 Core
47	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required.
48	63 mm dia (OD-63 mm & ID-51 mm nominal)
49	90 mm dia (OD-90 mm & ID-76 mm nominal)
50	Horticulture and Landscaping
51	Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
52	Providing and stacking of Plant (As per Architect approval) height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.( Big Tree)
53	Providing and stacking of Plant (As per Architect approval) height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..( MediumTree)
54	Providing and stacking of Plant (As per Architect approval) height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. ( Small Tree)
55	Providing and stacking of Plant (As per Architect approval) height 15 cm to 20 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.(Seasonal Trees).
56	Providing and stacking of Plant (As per Architect approval), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. (Shrubs)
57	Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications.
58	Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
59	Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment)
60	Mixing earth and manure in specified proportion or as directed.
61	Rough dressing the trenched ground including breaking the clods.
62	Fine dressing the ground
63	Spreading of mixed good earth and manure in specified proportions as above and in required thickness.
64	Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
65	Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
66	Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
67	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
68	Shifting of Existing pedestal with scuplture
69	Stone Stambh
70	Bitumen Road
71	Scarifying metalled (water-bound) road surface including disposal of rubbish, lead upto 50 m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity.
72	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Distance upto 10km
73	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete
74	Supplying & Laying of Stone Agrregate 45 to 63 mm etc all complete in direction of engineer in charge.
75	GSB Construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC. And compacting with smooth wheel roller to archieve the desired density, complete as per (MORD) technical specifcation Clause-401.
76	Wet Mix Macadam (plant Mix Method) Providing, laying, spreading and comacting graded stone aggegate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base /base course on well preared surface and compacting with vibratory roller to achieve the desired density.
77	Dense graded bituminous macadam Providing and laying dence graded bituminus macadam with higher capacity HMP using crushed aggregates of specified grading, premixxed with bituminus binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieved the desired compaction as per MoRTH specifcation clause No. 505 complete in all respects.
78	Prime Coat over WMM/WBM Providing and applying primer coat with SS-2 grade bitumen emulsion on prepared surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.
79	Tack Coat on Bituminous Surface Providing and applying tack coat with bitumen VG-10using bitumen pressure distributor at of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
80	Bituminus Concrete Providing and laying bituminus concrete with higher capacity hot mix plant using crushed agrregate of specied grading. premixed with bituminus binder @5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and aligment rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH spcification clause No. 507 complete in all respects.
81	BC with Waste Plastic additive : Providing and laying Bituminous concrete using crushed stone aggregates of specifiled grading. premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver flnisher equlped with electronic sensor to the requlred grade, evel and alignment and rolling wlth smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-charge. 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) and waste plastic additive @ 8% (percentage by weight of bitumen) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
82	CGBM : Providing and laying Porous hot bituminous mix as pergrading of IRC SP 125 2019 with Drum/batch type hot mixplant producing an average output of 75 tonnes per hourusing crushed aggregates of specified grading. premixed withbituminous binder @ 3 percent of mix and filler, transportingthe hot mix to work site, laying with a hydrostatic paverfinisher with sensor control to the required grade level andalignment rolling with smooth wheeled, tandem, rollers toachieve the desired compaction as per MORTH specificationclause No.507 complete in all respects and then cooling toair temperature. Subsequently then grouting through cementitious material to ensure full depth grouting for CGBM layer.
83	Road Marking with Hor Applled Thermoplastie Compound with Reflectorising Glass Beads on Bituminous Surtace, Providing and laying of hot applied thermoplastic compound 2.5 mm trick including reflectorising glass baads. © 250 gms per som area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be lavel, uniform and tree from streaks and holes.
84	Supply and fixing of raised pavement marker with Made of Plastic body of RPM Road Stud shall be Suggestive moulded from ASA (Acrylic Styrene Acrylonitrile) or HIPS (High-imoad Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with AST D4280. The Reflective panes shall consist of number of lenses contating single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecryiate conforming to ASTM 0788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro '-reflecting surface shail not be less than 13.00 sq.cm. the marker height shai not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker. excess adhesive on the pavement and adhesive on tha exposed surfaces of the markers shall be immediately removed. The contractor shall submil a two year warranty for salisfaciory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer, In addition. a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contracior who carries out the work of fixing of reflective road markers. In case the markers are displaced, damaged, get wom out or lose their reflectivity compared to stipulaled standards. the contractor would be required lo replace all such markers within 15 days of the intimation from the [Engineer, at his own cost. The rate shall include all malerials, labour, T8P, transportation, instaliation and incidentals all complete as per direction of the Engineer-in-Charge. RPM with Shank
85	Horticulture and Landscaping
86	Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.
87	Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge.
88	Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
89	Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
90	Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
91	Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..
92	Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge..
93	Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..
94	Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
95	Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size ofPoly bags & as per direction of the officer-in-charge.
96	Providing and stacking of Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..
97	Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.
98	Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
99	Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications.
100	Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
101	Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment)
102	Mixing earth and manure in specified proportion or as directed.
103	Rough dressing the trenched ground including breaking the clods.
104	Fine dressing the ground
105	Spreading of mixed good earth and manure in specified proportions as above and in required thickness.
106	Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
107	Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
108	Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
109	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete.
110	Sculpture Setting
111	Screen Wall with White Marble Cladding
112	Seating Roadside
113	Footpath Work
114	Drain
115	Electrification & Landscape Lighting
116	Supply & Fixing of’ 5mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket single arm for mounting of 1nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output>110lmn/watt. Design as per Architect in charge. (Make - Twinklelite/ wipro/ K Lite/ Luster)
117	Supplying Testing & Installation of Led Flood Light Luminaire 50W Philips Make Model - BVP 140 Led 50 CW PSU WH/ Wipro/ Luster etc all complete of direction of engineer in charge.
118	Supply & Fixing of’ 7mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket Double arm for mounting of 2nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output>110lmn/watt. Design as per Architect in charge.
119	Supply and fixing of decorative 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. Make Twinkle Light/ K lite/ Lusture
120	Supplying Testing & Installation of Led Flood Light Luminaire 100WV Philips Make Model- BVP 142 Led 100 CW PSU WH / Wipro/ Luster etc all complete of direction of engineer in charge.
121	Supplying Testing & Installation of Solar Light Luminaire 40 W Philips Make Model- BVP 142 Led 100 CW PSU WH / Wipro/ Luster etc all complete of direction of engineer in charge.
122	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
123	Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
124	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brassn nut bolt & spring washer spaced at 50mm)
125	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
126	6.00 Sqmm 4 Core
127	25.00 Sqmm 3.5 Core
128	70.00 Sqmm 3.5 Core
129	Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides.
130	The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only Incoming200 Amp. TPN-1 No Outgoing 100 Amp. TPN-1 No and 63 Amp. TPN-3 Nos. Cat. B. Cubicle Type
131	Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40 A TPN
132	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required.
133	63 mm dia (OD-63 mm & ID-51 mm nominal)
134	90 mm dia (OD-90 mm & ID-76 mm nominal)
135	HORTICULTURE AND LANDSCAPING
136	Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.
137	Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge.
138	Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
139	Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
140	Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
141	Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..
142	Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge..
143	Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..
144	Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
145	Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size ofPoly bags & as per direction of the officer-in-charge.
146	Providing and stacking of Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..
147	Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.
148	Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
149	Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications.
150	Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
151	Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment)
152	Mixing earth and manure in specified proportion or as directed.
153	Rough dressing the trenched ground including breaking the clods.
154	Fine dressing the ground
155	Spreading of mixed good earth and manure in specified proportions as above and in required thickness.
156	Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
157	Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
158	Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
159	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete.
160	Planter portable type
161	Planter with seating
162	Pergola
163	Thematic wall Painting
164	Bronze Mural on Wall
165	Bronze Sculptures (Jhanki)
166	Pedestal
167	Bronze Sculptures
168	Pedestal
169	Drip Irrigation
170	Rain Water Harvesting
171	SIGNAGES
172	Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white orother colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm
173	Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame workfrom the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage
174	Providing & Fixing of Signages made in sand Stone including carving & Moulding as per drawing
175	Screen Wall with White Marble Cladding
176	Seating Roadside
177	Footpath Work
178	Drain
179	Electrification & Landscape Lighting
180	Supply & Fixing of’ 5mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket single arm for mounting of 1nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output>110lmn/watt. Design as per Architect in charge. (Make - Twinklelite/ wipro/ K Lite/ Luster)
181	Supplying Testing & Installation of Led Flood Light Luminaire 50W Philips Make Model - BVP 140 Led 50 CW PSU WH/ Wipro/ Luster etc all complete of direction of engineer in charge.
182	Supply & Fixing of’ 7mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket Double arm for mounting of 2nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output>110lmn/watt. Design as per Architect in charge.
183	Supply and fixing of decorative 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. Make Twinkle Light/ K lite/ Lusture
184	Supplying Testing & Installation of Led Flood Light Luminaire 100WV Philips Make Model- BVP 142 Led 100 CW PSU WH / Wipro/ Luster etc all complete of direction of engineer in charge.
185	Supplying Testing & Installation of Solar Light Luminaire 40 W Philips Make Model- BVP 142 Led 100 CW PSU WH / Wipro/ Luster etc all complete of direction of engineer in charge.
186	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
187	Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
188	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brassn nut bolt & spring washer spaced at 50mm)
189	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
190	6.00 Sqmm 4 Core
191	25.00 Sqmm 3.5 Core
192	70.00 Sqmm 3.5 Core
193	Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides.
194	The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only Incoming200 Amp. TPN-1 No Outgoing 100 Amp. TPN-1 No and 63 Amp. TPN-3 Nos. Cat. B. Cubicle Type
195	Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40 A TPN
196	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required.
197	63 mm dia (OD-63 mm & ID-51 mm nominal)
198	90 mm dia (OD-90 mm & ID-76 mm nominal)
199	HORTICULTURE AND LANDSCAPING
200	Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.
201	Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge.
202	Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
203	Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
204	Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
205	Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..
206	Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge..
207	Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..
208	Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
209	Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size ofPoly bags & as per direction of the officer-in-charge.
210	Providing and stacking of Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..
211	Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.
212	Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
213	Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications.
214	Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
215	Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment)
216	Mixing earth and manure in specified proportion or as directed.
217	Rough dressing the trenched ground including breaking the clods.
218	Fine dressing the ground
219	Spreading of mixed good earth and manure in specified proportions as above and in required thickness.
220	Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
221	Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
222	Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
223	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete.
224	Planter portable type
225	Planter with seating
226	Pergola
227	Thematic wall Painting
228	Bronze Mural on Wall
229	Bronze Sculptures
230	Pedestal
231	Drip Irrigation
232	Rain Water Harvesting
233	SIGNAGES
234	Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white orother colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm
235	Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame workfrom the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage
236	Providing & Fixing of Signages made in sand Stone including carving & Moulding as per drawing
237	Footpath Work
238	HORTICULTURE AND LANDSCAPING
239	Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
240	Providing and stacking of Plant (As per Architect approval) height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.( Big Tree)
241	Providing and stacking of Plant (As per Architect approval) height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..( MediumTree)
242	Providing and stacking of Ficus reginald well branched, bushy of height 60- 75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
243	Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge
244	Providing and stacking of Euphorbia pulcherrima (dark red double bracts)well branched of height 60-75 cm. in earthen pots of size 25 cm as perdirection of the officer-in-charge.
245	Providing and stacking of Hamelia patens of height 90-105 cm. bushy in big size HDPE bags as per direction of the officer-in-charge
246	Providing and displaying of Aglaonema Butterfly having ht.30 cm 10 to 12fresh, healthy and attractive colorful leaves, well developed in 25 cm sizeEarthen pot/Plastic pot & as per direction of the officer-in-charge.
247	Providing and Displaying of Aglaonema Sam plant ht.30 cm well developedthree in one, having 18 to 20 fresh, healthy and attractive colorful leaves in35 cm size Earthen pot/Chali/Tray & as per direction of the officer-in-charge
248	Providing and displaying of Aglaonema Silver Queen having 30 cm to 45cm. ht. with 12 to 15 leaves, multi suckers, fresh and healthy leaves, welldeveloped in 25 cm dia Earthen pot/Plastic pot & as per direction of theofficer-in-charge
249	Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring,Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, PeruvianaOdissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge
250	Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge.
251	Providing and stacking of Petra volubilis of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge
252	Providing and stacking of winter seasonal seedling/cutting at site of workwell developed and healthy free from disease in per tray and each trayhaving 100 Nos plants as per direction of the officer-in-charge.
253	Antirrhinum dwarf
254	Carnation (double) Dutch
255	Carnation (double) Lilliput
256	Gerbera hybrid double
257	Providing and stacking of summer & rainy seasonal seedling at site ofwork well developed and healthy free from disease in per tray and eachtray having 100 Nos plants as per direction of the officer-in-charge
258	Celosia argentea & Celosia crostata Hybrid
259	Cosmos hybrid
260	Gaillardia Double
261	Providing and stacking of Plant (As per Architect approval) height 15 cm to 20 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.(Seasonal Trees).
262	Providing and stacking of Plant (As per Architect approval), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. (Shrubs)
263	Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
264	Providing and Displaying Carissa carandas (Karonda) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
265	Providing and Displaying ELEPHANT EAR PLANT (Colocasia) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
266	Providing and Displaying Lawsonia Inermis (Henna Tree) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
267	Providing and Displaying Manokamini (Murraya Panculata) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
268	Providing and Displaying Wild Grass as per direction of the officer-in-charge.
269	Providing and Displaying GOLDEN BAMBOO (Phyllostachys aurea) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
270	Providing and Displaying Chrysopogon zizanioides (Vetiver GRASS) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
271	Providing and Displaying Canna Lily 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
272	Providing and Displaying Pretty Bearded Iris 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
273	Providing and Displaying Nepenthes Lady Luck 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
274	Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
275	Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, PeruvianaOdissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
276	Providing and Displaying Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
277	Providing and stacking of Michelia champa (Golden Champa) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
278	Providing and stacking of Ziziphus mauritianaIndian jujube (BER) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
279	Providing and stacking of Citrus limon LEMON TREE of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
280	Providing and stacking of Morus alba SHAHTOOT of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
281	Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
282	Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
283	Providing and stacking of Ficus Racemosa (Goolar) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge.
284	Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.
285	Providing and stacking of Ficus Virens (Paakad) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.
286	Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
287	Providing and stacking of Putranjiva roxburghii of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge.
288	Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications.
289	Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
290	Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment)
291	Mixing earth and manure in specified proportion or as directed.
292	Rough dressing the trenched ground including breaking the clods.
293	Fine dressing the ground
294	Spreading of mixed good earth and manure in specified proportions as above and in required thickness.
295	Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
296	Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
297	Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
298	Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
299	Stone Stambh
300	EXTERNAL ELECTRIFICATION & LANDSCAPE LIGHTING
301	Supply & Fixing of’ 5mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket single arm for mounting of 1nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output>110lmn/watt. Design as per Architect in charge. (Make - Twinklelite/ wipro/ K Lite/ Luster)
302	Supply & Fixing of’ 7mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket Double arm for mounting of 2nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output>110lmn/watt. Design as per Architect in charge.
303	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
304	Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
305	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brassn nut bolt & spring washer spaced at 50mm)
306	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
307	6.00 Sqmm 4 Core
308	25.00 Sqmm 3.5 Core
309	70.00 Sqmm 3.5 Core
310	Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides.
311	The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only Incoming200 Amp. TPN-1 No Outgoing 100 Amp. TPN-1 No and 63 Amp. TPN-3 Nos. Cat. B. Cubicle Type
312	Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40 A TPN
313	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required.
314	63 mm dia (OD-63 mm & ID-51 mm nominal)
315	90 mm dia (OD-90 mm & ID-76 mm nominal)
316	SIGNAGES
317	Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white orother colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm
318	Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame workfrom the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage
319	Providing & Fixing of Signages made in sand Stone including carving & Moulding as per drawing
320	Multi Duct System
321	Earth work in excavation in foundation in ordinary soil in trenches (loam,clay or sand) including lift upto 1.5m.lead upto 50 m. and dressing of sides and ramming of bottom and disposal of surplus earth as directed by Eng.incharge with in a distance of 50 m.
322	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm (nominal size) Using doncrete HPC @0.90gram per bag of cement IS:9013 Make Donbuilding chemical or equvellent
323	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard settingof concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mixor bear the cost of extra cement.
324	All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum
325	Centering and shuttering including strutting, propping etc. and removal of form for Foundation, footing, based of column, etc. for mass concrete.
326	Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
327	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.
328	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
329	120 mm dia (OD-120 mm & ID-103 mm nominal)
330	160 mm dia (OD-160 mm & ID-135 mm nominal)
331	Providing & Fixing of 7 Way 40mm Multi Ducts with solid permanently solidly lubricated Silicore in inner layer for ICT fibre cables comforming to ASTMF 2160, ASTM D 2444 and /or equivalent indian standard External Sheath shall be in Orange Color and shall be free from visual defects like blisters. shrink holes, flakıng, scratches, groove lines & surface roughness. The colour of the7 nos. PLB HDPE ducts shall be Green, blue, yellow, Brown, violet, Grey Red for differentiation. Outer sheet thickness shall S 1.2mm 0.2mm. The inner surface of the multi channel ducts shall be spirally ribbed & shall be of a configuration for faster installation of cables. Wall hickness(mm) of each of the ducts Excluding rib height shall be 2.9mm 0.3mm. ISO Requirements- ISO 9001, 14001, 18001 complete as per specifications and directions of Engineer-in-charge.
332	Providing & fixing of Prefabricated Manhole Suitable for 7 way multi Ducts (Size as per Drawing ) including all necessary T&P all complete in direction of engineer in charge.
333	Providing & fixing of Prefabricated Manhole Single Ducts (Size as per Drawing ) including all necessary T&P all complete in direction of engineer in charge.
334	Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
335	Supplying & Fixing of FRP COMPOSITE(Tested as per BS EN 124 or IS 1726) resin manhole cover and frame of appropriate size and load capacity of 12 tonne approved brand \\"THERMODRAIN\\" confirmingto BSEN – 124:1994. Product shall have top abrasion resistant layer of decorative grey granite finish. It shall also confirm “Permanent Set” criterion as per BSEN124.Product should be tested in test lab for load capacity and permanent set. The lifting arrangement should have an insert of 5mm in Glass Filled nylon socket type with key hole. (Make Thermodrain/ Aco Drain/ Zurn/Fibrocast) with outer frame size
336	upto 600mm X 600mm
337	Supplying & Fixing of FRP COMPOSITE Recess (Sunken )Cover (Tested as per BS EN 124 or IS 1726) resin manhole cover and frame of appropriate size and load capacity of 12 tonne approved brand \\"THERMODRAIN\\" confirming to BSEN – 124:1994. Product shall have top abrasion resistant layer of decorative grey granite finish. It shall also confirm “Permanent Set” criterion as per BSEN124.Product should be tested in test lab for load capacity and permanent set. The lifting arrangement should have an insert of 5mm in Glass Filled nylon socket type with key hole. (Make Thermodrain/ Aco Drain/ Zurn/Fibrocast) with outer frame size
338	upto 1000mmx1000mm
339	Junction Development
340	Cost of Upgradation Work of Junction
341	Cost of Center Scuplture
342	Electrification & Landscape Lighting
343	Supply & Fixing of’ 5mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket single arm for mounting of 1nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output>110lmn/watt. Design as per Architect in charge. (Make - Twinklelite/ wipro/ K Lite/ Luster)
344	Supplying Testing & Installation of Led Flood Light Luminaire 50W Philips Make Model - BVP 140 Led 50 CW PSU WH/ Wipro/ Luster etc all complete of direction of engineer in charge.
345	Supplying Testing & Installation of Led Flood Light Luminaire 100WV Philips Make Model- BVP 142 Led 100 CW PSU WH / Wipro/ Luster etc all complete of direction of engineer in charge.
346	Supply and fixing of decorative 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect.
347	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
348	Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
349	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brassn nut bolt & spring washer spaced at 50mm)
350	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
351	6.00 Sqmm 4 Core
352	25.00 Sqmm 3.5 Core
353	70.00 Sqmm 3.5 Core
354	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required.
355	63 mm dia (OD-63 mm & ID-51 mm nominal)
356	90 mm dia (OD-90 mm & ID-76 mm nominal)
357	HORTICULTURE AND LANDSCAPING
358	Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
359	Providing and stacking of Plant (As per Architect approval) height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.( Big Tree)
360	Providing and stacking of Plant (As per Architect approval) height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..( MediumTree)
361	Providing and stacking of Plant (As per Architect approval) height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. ( Small Tree)
362	Providing and stacking of Plant (As per Architect approval) height 15 cm to 20 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.(Seasonal Trees).
363	Providing and stacking of Plant (As per Architect approval), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. (Shrubs)
364	Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications.
365	Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
366	Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment)
367	Mixing earth and manure in specified proportion or as directed.
368	Rough dressing the trenched ground including breaking the clods.
369	Fine dressing the ground
370	Spreading of mixed good earth and manure in specified proportions as above and in required thickness.
371	Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
372	Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
373	Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
374	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
375	Bitumen Road
376	Scarifying metalled (water-bound) road surface including disposal of rubbish, lead upto 50 m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity.
377	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Distance upto 10km
378	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete
379	Supplying & Laying of Stone Agrregate 45 to 63 mm etc all complete in direction of engineer in charge.
380	GSB Construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC. And compacting with smooth wheel roller to archieve the desired density, complete as per (MORD) technical specifcation Clause-401.
381	Wet Mix Macadam (plant Mix Method) Providing, laying, spreading and comacting graded stone aggegate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base /base course on well preared surface and compacting with vibratory roller to achieve the desired density.
382	Dense graded bituminous macadam Providing and laying dence graded bituminus macadam with higher capacity HMP using crushed aggregates of specified grading, premixxed with bituminus binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieved the desired compaction as per MoRTH specifcation clause No. 505 complete in all respects.
383	Prime Coat over WMM/WBM Providing and applying primer coat with SS-2 grade bitumen emulsion on prepared surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.
384	Tack Coat on Bituminous Surface Providing and applying tack coat with bitumen VG-10using bitumen pressure distributor at of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
385	Bituminus Concrete Providing and laying bituminus concrete with higher capacity hot mix plant using crushed agrregate of specied grading. premixed with bituminus binder @5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and aligment rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH spcification clause No. 507 complete in all respects.
386	BC with Waste Plastic additive : Providing and laying Bituminous concrete using crushed stone aggregates of specifiled grading. premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver flnisher equlped with electronic sensor to the requlred grade, evel and alignment and rolling wlth smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-charge. 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) and waste plastic additive @ 8% (percentage by weight of bitumen) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
387	CGBM : Providing and laying Porous hot bituminous mix as pergrading of IRC SP 125 2019 with Drum/batch type hot mixplant producing an average output of 75 tonnes per hourusing crushed aggregates of specified grading. premixed withbituminous binder @ 3 percent of mix and filler, transportingthe hot mix to work site, laying with a hydrostatic paverfinisher with sensor control to the required grade level andalignment rolling with smooth wheeled, tandem, rollers toachieve the desired compaction as per MORTH specificationclause No.507 complete in all respects and then cooling toair temperature. Subsequently then grouting through cementitious material to ensure full depth grouting for CGBM layer.
388	Road Marking with Hor Applled Thermoplastie Compound with Reflectorising Glass Beads on Bituminous Surtace, Providing and laying of hot applied thermoplastic compound 2.5 mm trick including reflectorising glass baads. © 250 gms per som area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be lavel, uniform and tree from streaks and holes.
389	Supply and fixing of raised pavement marker with Made of Plastic body of RPM Road Stud shall be Suggestive moulded from ASA (Acrylic Styrene Acrylonitrile) or HIPS (High-imoad Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with AST D4280. The Reflective panes shall consist of number of lenses contating single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecryiate conforming to ASTM 0788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro '-reflecting surface shail not be less than 13.00 sq.cm. the marker height shai not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker. excess adhesive on the pavement and adhesive on tha exposed surfaces of the markers shall be immediately removed. The contractor shall submil a two year warranty for salisfaciory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer, In addition. a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contracior who carries out the work of fixing of reflective road markers. In case the markers are displaced, damaged, get wom out or lose their reflectivity compared to stipulaled standards. the contractor would be required lo replace all such markers within 15 days of the intimation from the [Engineer, at his own cost. The rate shall include all malerials, labour, T8P, transportation, instaliation and incidentals all complete as per direction of the Engineer-in-Charge. RPM with Shank
390	Stone Stambh
391	HORTICULTURE AND LANDSCAPING
392	Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.
393	Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge.
394	Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
395	Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
396	Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
397	Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..
398	Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge..
399	Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..
400	Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
401	Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size ofPoly bags & as per direction of the officer-in-charge.
402	Providing and stacking of Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..
403	Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.
404	Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
405	Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications.
406	Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
407	Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment)
408	Mixing earth and manure in specified proportion or as directed.
409	Rough dressing the trenched ground including breaking the clods.
410	Fine dressing the ground
411	Spreading of mixed good earth and manure in specified proportions as above and in required thickness.
412	Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
413	Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
414	Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
415	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete.
416	Screen Wall with Sandstone Cladding
417	Seating Roadside
418	Footpath Work
419	Drain
420	Electrification & Landscape Lighting
421	Supply & Fixing of’ 5mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket single arm for mounting of 1nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output>110lmn/watt. Design as per Architect in charge. (Make - Twinklelite/ wipro/ K Lite/ Luster)
422	Supplying Testing & Installation of Led Flood Light Luminaire 50W Philips Make Model - BVP 140 Led 50 CW PSU WH/ Wipro/ Luster etc all complete of direction of engineer in charge.
423	Supply & Fixing of’ 7mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket Double arm for mounting of 2nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output>110lmn/watt. Design as per Architect in charge.
424	Supply and fixing of decorative 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. Make Twinkle Light/ K lite/ Lusture
425	Supplying Testing & Installation of Led Flood Light Luminaire 100WV Philips Make Model- BVP 142 Led 100 CW PSU WH / Wipro/ Luster etc all complete of direction of engineer in charge.
426	Supplying Testing & Installation of Solar Light Luminaire 40 W Philips Make Model- BVP 142 Led 100 CW PSU WH / Wipro/ Luster etc all complete of direction of engineer in charge.
427	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
428	Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
429	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brassn nut bolt & spring washer spaced at 50mm)
430	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
431	6.00 Sqmm 4 Core
432	25.00 Sqmm 3.5 Core
433	70.00 Sqmm 3.5 Core
434	Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides.
435	The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only Incoming200 Amp. TPN-1 No Outgoing 100 Amp. TPN-1 No and 63 Amp. TPN-3 Nos. Cat. B. Cubicle Type
436	Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40 A TPN
437	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required.
438	63 mm dia (OD-63 mm & ID-51 mm nominal)
439	90 mm dia (OD-90 mm & ID-76 mm nominal)
440	HORTICULTURE AND LANDSCAPING
441	Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.
442	Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge.
443	Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
444	Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
445	Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
446	Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..
447	Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge..
448	Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..
449	Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
450	Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size ofPoly bags & as per direction of the officer-in-charge.
451	Providing and stacking of Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..
452	Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.
453	Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
454	Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications.
455	Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
456	Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment)
457	Mixing earth and manure in specified proportion or as directed.
458	Rough dressing the trenched ground including breaking the clods.
459	Fine dressing the ground
460	Spreading of mixed good earth and manure in specified proportions as above and in required thickness.
461	Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
462	Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
463	Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
464	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete.
465	Planter portable type
466	Planter with seating
467	Pergola
468	Thematic wall Painting
469	Bronze Mural on Wall
470	Bronze Sculptures
471	Pedestal
472	Drip Irrigation
473	Rain Water Harvesting
474	SIGNAGES
475	Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white orother colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm
476	Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame workfrom the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage
477	Providing & Fixing of Signages made in sand Stone including carving & Moulding as per drawing
478	Footpath Work
479	HORTICULTURE AND LANDSCAPING
480	Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
481	Providing and stacking of Plant (As per Architect approval) height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.( Big Tree)
482	Providing and stacking of Plant (As per Architect approval) height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..( MediumTree)
483	Providing and stacking of Ficus reginald well branched, bushy of height 60- 75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
484	Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge
485	Providing and stacking of Euphorbia pulcherrima (dark red double bracts)well branched of height 60-75 cm. in earthen pots of size 25 cm as perdirection of the officer-in-charge.
486	Providing and stacking of Hamelia patens of height 90-105 cm. bushy in big size HDPE bags as per direction of the officer-in-charge
487	Providing and displaying of Aglaonema Butterfly having ht.30 cm 10 to 12fresh, healthy and attractive colorful leaves, well developed in 25 cm sizeEarthen pot/Plastic pot & as per direction of the officer-in-charge.
488	Providing and Displaying of Aglaonema Sam plant ht.30 cm well developedthree in one, having 18 to 20 fresh, healthy and attractive colorful leaves in35 cm size Earthen pot/Chali/Tray & as per direction of the officer-in-charge
489	Providing and displaying of Aglaonema Silver Queen having 30 cm to 45cm. ht. with 12 to 15 leaves, multi suckers, fresh and healthy leaves, welldeveloped in 25 cm dia Earthen pot/Plastic pot & as per direction of theofficer-in-charge
490	Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring,Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, PeruvianaOdissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge
491	Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge.
492	Providing and stacking of Petra volubilis of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge
493	Providing and stacking of winter seasonal seedling/cutting at site of workwell developed and healthy free from disease in per tray and each trayhaving 100 Nos plants as per direction of the officer-in-charge.
494	Antirrhinum dwarf
495	Carnation (double) Dutch
496	Carnation (double) Lilliput
497	Gerbera hybrid double
498	Providing and stacking of summer & rainy seasonal seedling at site ofwork well developed and healthy free from disease in per tray and eachtray having 100 Nos plants as per direction of the officer-in-charge
499	Celosia argentea & Celosia crostata Hybrid
500	Cosmos hybrid

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Road Construction Tenders

Road Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Work Of Thematic Development Of Hastinapur Road In Meerut District., Meerut-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Work Of Thematic Development Of Hastinapur Road In Meerut District., Meerut-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us