Tender For Hiring Of Agency For Cng Stations Works On 2 Years Annual Rate Contract Basis At Puri-Ganjam-Nayagarh And Giridih-Dhanbad Ga Of Gail Gas Limited, Noida-Uttar Pradesh

TDR : 55426748

Tender Notice
BOQ

15 Days Left

Noida , Uttar Pradesh

Tender Brief : Tender For Hiring Of Agency For Cng Stations Works On 2 Years annual rate contract Basis At Puri-Ganjam-Nayagarh And Giridih-Dhanbad Ga Of Gail Gas Limited

Document Fees
Refer document

EMD
₹ 2000000.0 /-

Tender Value
Refer document

Submission Date
29-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Puri-Ganjam-Nayagarh
2	PART - I : Electrical Works
3	Electrical Works Supply
4	Supply including packing and forwarding, transportation, delivery at storage to site 63kVA, 11/0.433kV Outdoor type, 3 Ph, 50Hz, Cu wound, Dyn11,ONAN Distribution Transformer complete with all accessories and first oil filled as per tender speciifcation. Transformer shall be as per SEB approved make. (Star rating / Efficiency class of transformer shall be as per SEB standard during executiion).
5	Supply including packing and forwarding, transportation, delivery at storage to site 25kVA, 11/0.433kV Outdoor type, 3 Ph, 50Hz, Cu wound, Dyn11,ONAN Distribution Transformer complete with all accessories and first oil filled as per tender speciifcation. Transformer shall be as per SEB approved make. (Star rating / Efficiency class of transformer shall be as per SEB standard during executiion).
6	Supply of 11kV double pole structure with 9 mtr RCC poles including cross bracing’s of ISMC ,GOS with earth switch, polymeric type LA’s & pin insulator, HG fuses, ACSR conductor, stay sets, earthing, alkathine tube etc. as per the specification including civil works. Make of all components shall be as per SEB approved make.
7	Supply of Switchboards
8	Design, engineering, manufacture, shop testing, supply including packing and forwarding, transportation, delivery at storage and from storage to site of power distribution board (PDB) :
9	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD & as per standard Specification.
10	Single In-comer of 125 Amp (with Single phase preventer) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) along with VMR.
11	Outgoing with 01 no. 80 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for Booster Compressor.
12	Outgoing with 01 no. 63 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for APFC panel.
13	Outgoing with 02 nos. 32 Amp TPN MCCB (with TM based O/C, S/C & E/F RELASE) for UPS and Static Bypass.
14	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
15	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
16	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD no. & as per standard Specification.
17	Single In-comer 100A (with Single phase Protection ) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) etc as required along with VMR.
18	Outgoing with 3 nos. 63 Amp 4 pole MCCB (with TM based O/C,S/C & E/F RELASE) for i)Auxiliaries of Engine driven compressor like Exhaust fan/ lighting, etc ii) Air Compressor iii) APFC Panel
19	Outgoing with 2 nos. 32 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for UPS and Static Bypass.
20	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
21	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
22	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD & as per standard Specification .
23	Single In-comer 63A (with Single phase Protection ) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) etc as required along with VMR.
24	Outgoing with 2 nos. 32 Amp 4 pole MCCB (with TM based O/C,S/C & E/F RELASE) for i)Auxiliaries of DCU Unit ii)Spare
25	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
26	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
27	Floor mounted APFC Panel of 10KVAR capacitor bank in steps of 4x2.5 KVAR capacitors consisting of bus bar chamber, cable alley incoming (FSU), outgoing feeder (FSUs) as specified in tender specification
28	Outdoor type dust & weather proof sheet steel (2 mm thick) enclosed MCCB of following rating for mounting on wall or pedestal. 125A, 415V, 4 Pole, AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals and outgoing terminals, with RYB indication.
29	Outdoor type dust & weather proof sheet steel (2 mm thick) enclosed MCCB of following rating for mounting on wall or pedestal. 100A, 415V, 4 Pole, AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals and outgoing terminals, with RYB indication.
30	Supply including packing and forwarding, transportation, delivery at storage of lighting fixtures complete with mounting bracket, flame proof/non flame proof, control gear box/ Junction Box ,glands ,lugs as per the type of fixture, lamps etc. including civil work with pipe inserts for cables and connecting work, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Work to be completed in all respects.
31	Street lighting, integral flame proof well glass fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 72 W LED luminaire with flame proof control gear/ Junction box (Model no. FLPW-1095 of Baliga make or equivalent)
32	Supply of Integral flame proof Flood Light fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 72 W LED luminaire (Baliga make or equivalent)
33	Supply of Street lighting pole 6mtr high GI octagonal pole (Type BOP-6030 of Bajaj make or equivalent) complete with bracket, GI clamps for fixing flame proof control gear box as per standard drawing & specification.
34	Design, engineering, supply including packing and forwarding, transportation, delivery at storage, of the complete earthing and lightning protection system, earth electrodes/ pit, earth main ring, earthing of electrical equipments, instrument panels, field instruments, process equipments and pipes/ flanges including all associated civil work with all material (Like Bitumen coating) and labour as per specification and drawings approved by the company in with IS 3043.
35	Earth Pits- GI PIPE Electrode (size 3.0 m long, 65NB Class-B) with 6 mm thick chequered plate cover
36	Earth Pits- Copper plate Electrode with 6 mm thick chequered plate cover
37	GI Strip (50X6) mm
38	GI Strip (25X3) mm
39	Arrangement for Earthing of LCV with Flexible green Cu wire (25 sqmm of approx 30 Meter length) ,Clamp (including bolting arrangement) ,Flexible PVC, crcodile clamps(2 nos.each) and other item etc. including MS enclosure box with door of sheet thk (2.00mm) color etc.
40	GI lightning rod 25 mm dia. 1800 mm long including supply of all hardware bare copper rope labour etc. complete as per approved drawings, specifications and directions of Engineer-In-Charge.
41	Advance maintenance free earthing system with 3mtr earth electrode of low carbon steel with 250 micron copper coating with carbon based backfill compound as per IS 3043/IEEE-80.
42	Design, engineering,supply including packing and forwarding, transportation, delivery at storage, of the 1.1kV grade XLPE insulated, PVC sheathed, FRLS power and control cables (conforming to IS:7098 and specification) including Cable glands & Lugs etc.of following sizes in trenches/ excavated under ground trench /trays, pulling through pipes and its proper sealing, cutting of paved area, roads etc.
43	3.5x 120 mm2 A2XFY
44	3.5x 95 mm2 A2XFY
45	3.5x 50 mm2 A2XFY
46	3.5x 35 mm2 A2XFY
47	4x 25 mm2 A2XFY
48	4x10 mm2 2XWY
49	4x 6 mm2 2XWY
50	4x 2.5 mm2 2XWY
51	Design, engineering, supply including packing and forwarding, transportation, delivery at storage, of the 2.5 mm2, 1.1kV grade XLPE insulated, PVC sheathed, FRLS 2XWY Copper cable
52	Supply of following sizes of HDPE Pipe as per approved drawings and directions of Engineer-In-Charge.
53	50 mm NB
54	80 mm NB
55	100 mm NB
56	150 mm NB
57	Supply of point wiring as per details in construction drawing & specification includes PVC conduits in ceiling, complete wiring including flexible wire (FR PVC), switch boxes & switches (ANCHOR ROMA make or equivalent), Multi strand Flexible HR PVC insulated copper conductor wires/cables for following items-
58	Surface/ recess mounted LED light fixrure with LED lamp (type LCTLRN-36-FO-CDL - 2 X 2 ft of CG make or equivalent).
59	Surface/ recess mounted LED light fixrure with LED lamp (type LCTLRN-18-FO-CDL - 2 X 2 ft of CG make or equivalent).
60	Industrial Flame proof fluorescent lamp/LED fitting with lamp (type EXTL 240 of CG make or equivalent).
61	Exhaust fan (Industrial type 300/450 mm) with louvers,950 rpm,55watt with flap.
62	Flame Proof (CMIFR approved) 12\\" Exhaust Fan.0.25HP motor,1440 rpm. (Preferred Make: Baliga, FCG, CGL, Prompt)
63	Socket outlet (5/15 Amp combination) of ANCHOR ROMA make or equivalent
64	20 Amp sheet steel enclosed industrial type socket with 20 Amp DP MCB for AC.
65	Ceiling fan with electronic regulator ( Energy efficent, 50W, 1200 mm sweep)
66	Wall mounted fan with electronic regulator ( Energy efficent, 50W,) etc complete in all respect for wall mounting
67	SOLAR SYSTEM FOR OUTDOOR EMERGENCY LIGHTING
68	Design, manufacture, testing at works, supply, storage, transportation to site of Solar Street lighting system complete with GI pole and GI mounting bracket, control gear box, internal cable from fitting to junction box, and 15W LED fixture (Fixtures Bajaj Make or equvalent and Battery make Exide, Amron etc), three days battery backup with solar Module, earthing, electronics, dusk-dawn operation etc including pipe inserts for cables and connecting work and commissioning spares as required, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Nominal height of GI pole shall be 6m. Work to be completed in all respects.
69	Supply of following including necessary clamp, bolts, rawl plugs etc.
70	Shock hazard charts
71	First Aid Boxes
72	Carbon-di-oxide(CO2) type fire extinguisher 4.5 Kg capacity Complete with gunmetal valve conforming to IS : 3224 With ISI mark, Discharge horn with bend & wall fixing Bracket With Mfg. Test certificate.
73	Caution boards
74	Single Line Diagram in teak wood wall cabinet with glass door
75	Wooden key box with glass cover
76	Supply of 1.1kV grade insulated mats required for maintenance of electrical equipment in substation as required including cutting to required shape in running length and including all labour and materials etc. complete and as per directions of Engineer-In-Charge as per IS 15652 and Indian Electricity Rules.
77	Supply of following Hot Dip Galvanized Ladder/Perforated Type cable trays (as per IS 2629) including bends, tee, crosses,horizontal and vertical splices along with cable tray cover(Wherever required for Asthetic look ) etc. as required including supply of all G.I hardwares, all labour and material as required as per standard drawings, specification and direction of Engineer-in-charge.Perforated type, made from 50mm height and 2.5 mm thick sheet steel & galvanized (86 microns) of following sizes.
78	150mm wide
79	300mm wide
80	Supply of 2 Coats of Primer Painted & Fabricated support structure.
81	UPS SYSTEM
82	Design, engineering, manufacture, shop testing, supply, packing and forwarding, transportation, delivery at storage ,inspection, packing, forwarding, delivery including commissioning spares as required of UPS systems as per specification, block diagram and following rating:
83	3KVA, 230 V Single phase, 50 Hz, single industrial type, UPS system suitable for input Power supply voltage of 320V-460V-TPN with healthy single-Phase Selection, Output 230V +/-1%, AC with Bypass supply, Battery Bank, and 2.0 hrs. Battery backup (VRLA, 12V) and battery capacity shall not be less than 13.0 KVAh (where KVAH = battery AH x 12 V x No. of Batteries). As per enclosed Specification, Block diagram & Data sheet and shall be complete in all respect. Including All interconnecting cables among UPS, Rectifier, battery stand, ACDB etc (30 mtr shall be considered between battery bank and UPS panel, 30 mtr cable shall be considered between ACDB and UPS panel.
84	230 V, 36 KA single front type indoor wall mounted ACDB to receive input from UPS consisting of Incomer 32A DP MCB & Outgoing 10 Nos. 6A to 10A DP MCB, complete with wiring, indication lamp, ammeter, voltmeter etc including all labour and materials with operating mechanism & all accessories.
85	Erection Material
86	Supply of MS base frame support for switch gear and bracket for misc. electrical equipment,cable tray support out of roled MS section,pipes,plates etc including welding, bolting, reveting, supply of necessary anchor bolts and grouting etc supply of paints applying one coat of anti rust primer two finish coats of approved synthetic enamel paints including bracking walls, floors etc for structure as required including supply of all GI hardware materials including all labour and materials complete as required and the direction of Engineer-in-charge.
87	For COCO/RO/OLS/MS/DBS/DCU
88	Supply of electrical accessories including, cable tags, cable tie ,Flexible pvc conduit,cable marker, nickle plated lugs, double compressed brass cable glands,brass adaptar/reducers/nipples, fixing of metallic anchor fasteners for supporting of cable trays and misc. electrical switchgear including all labour and materials complete as required and as per directions of Engineer-In-Charge.
89	For COCO/RO/OLS/MS/DBS/DCU
90	Supply of required material for construction of Cable pit with pit cover (SFRC cover HD-20 of IS-12592) including civil works repair, concrete wall/brick wall & its materials, cable conduits interface & its water sealing, cable support structure including all labour and materials complete in all aspect as per approved drawings and directions of Engineer-In-Charge.
91	500X500(of inside clearance)X 600(Depth)
92	750X750(of inside clearance)X800(Depth)
93	1000X1000(of inside clearance)X1000(Depth)
94	ELECTRICAL WORKS - ERECTION
95	Installation, Testing and Commissioning of 63kVA, 11/0.433kV Outdoor type, 3 Ph, 50Hz, Cu wound, Dyn11,ONAN Distribution Transformer complete with all accessories and first oil filled as per tender speciifcation. Transformer shall be as per SEB approved make. (Star rating / Efficiency class of transformer shall be as per SEB standard during executiion).
96	Installation, Testing and Commissioning of 25kVA, 11/0.433kV Outdoor type, 3 Ph, 50Hz, Cu wound, Dyn11,ONAN Distribution Transformer complete with all accessories and first oil filled as per tender speciifcation. Transformer shall be as per SEB approved make. (Star rating / Efficiency class of transformer shall be as per SEB standard during executiion).
97	Installation, Testing and Commissioning of 11kV double pole structure with 9 mtr RCC poles including cross bracing’s of ISMC ,GOS with earth switch, polymeric type LA’s & pin insulator, HG fuses, ACSR conductor, stay sets, earthing, alkathine tube etc. as per the specification including civil works. Make of all components shall be as per SEB approved make.
98	STATUTORY APPROVALS, PERMISSIONS : Coordination & Liasioning with statutory authorities for obtaining Licence/NOC/ Approval /Permission with statutory authorities for GAIL Gas as required for setting of CNG stations .However, all the statutory payment required for such Licence/NOC/ Approval /Permission shall be reimbursed by GGL at actuals against production of documentary evidence and this statutory payment at actuals shall be over and above the coordination and liasioning charges in the items below. The bidder shall note that the rates for the items are inclusive of all expenses (except for statutory payments which shall be reimbursed on actuals) for carrying out the liasioning and coordination work till obtaining the final Licence/NOC/ Approval /Permission.To submit application on behalf of Gail gas to SEB for the incoming power Installation, Testing and Commissioning along with all the required documents, obtaining NOC from SEB for final charging, obtaining drawing approval from CEIG before commencemnt of work and obtaining safety & comissionming approval of Transformer by CEIG and SEB.The price shall be inclusive of Application Fee,liaisioning, Local Transport, Incidental travelling etc, and all other expenses.
99	Installation, Testing and Commissioning of Switchboards
100	Design, engineering, manufacture, shop testing, Installation, Testing and Commissioning including packing and forwarding, transportation, delivery at storage and from storage to site of power distribution board (PDB) :
101	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD & as per standard Specification.
102	Single In-comer of 125 Amp(with Single phase preventer ) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) along with VMR.
103	Outgoing with 01 no. 80 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for Booster Compressor.
104	Outgoing with 01 no. 63 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for APFC panel.
105	Outgoing with 02 nos. 32 Amp TPN MCCB (with TM based O/C, S/C & E/F RELASE) for UPS and Static Bypass.
106	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
107	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
108	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD & as per standard Specification .
109	Single In-comer 100A (with Single phase Protection ) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) etc as required along with VMR.
110	Outgoing with 3 nos. 63 Amp 4 pole MCCB (with TM based O/C,S/C & E/F RELASE) for i)Auxiliaries of Engine driven compressor like Exhaust fan/ lighting, etc ii) Air Compressor iii) APFC Panel
111	Outgoing with 2 nos. 32 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for UPS and Static Bypass.
112	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
113	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
114	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD no. MEC/23VF/05/E9/E/1081D & as per standard Specification .
115	Single In-comer 63A (with Single phase Protection ) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) etc as required along with VMR.
116	Outgoing with 2 nos. 32 Amp 4 pole MCCB (with TM based O/C,S/C & E/F RELASE) for i)Auxiliaries of DCU Unit ii)Spare
117	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
118	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
119	Floor mounted APFC Panel of 10KVAR capacitor bank in steps of 4x2.5 KVAR capacitors consisting of bus bar chamber, cable alley incoming (FSU), outgoing feeder (FSUs) as specified in tender specification
120	Outdoor type dust & weather proof sheet steel (2 mm thick) enclosed MCCB of following rating for mounting on wall or pedestal. 125A, 415V, 4 Pole, AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals and outgoing terminals, with RYB indication.
121	Outdoor type dust & weather proof sheet steel (2 mm thick) enclosed MCCB of following rating for mounting on wall or pedestal. 100A, 415V, 4 Pole, AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals and outgoing terminals, with RYB indication.
122	Installation, Testing and Commissioning including packing and forwarding, transportation, delivery at storage of lighting fixtures complete with mounting bracket, flame proof/non flame proof, control gear box/ Junction Box ,glands ,lugs as per the type of fixture, lamps etc. including civil work with pipe inserts for cables and connecting work, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Work to be completed in all respects.
123	Street lighting, integral flame proof well glass fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 72 W LED luminaire with flame proof control gear/ Junction box (Model no. FLPW-1095 of Baliga make or equivalent)
124	Installation, Testing and Commissioning of Integral flame proof Flood Light fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 72 W LED luminaire (Baliga make or equivalent)
125	Installation, Testing and Commissioning of Street lighting pole 6mtr high GI octagonal pole (Type BOP-6030 of Bajaj make or equivalent) complete with bracket, GI clamps for fixing flame proof control gear box as per standard drawing & specification.
126	Installation, Testing and Commissioning including packing and forwarding, transportation, delivery at storage, of the complete earthing and lightning protection system, earth electrodes/ pit, earth main ring, earthing of electrical equipments, instrument panels, field instruments, process equipments and pipes/ flanges including all associated civil work with all material (Like Bitumen coating) and labour as per specification and drawings approved by the company in with IS 3043.
127	Earth Pits- GI PIPE Electrode (size 3.0 m long, 65NB Class-B) with 6 mm thick chequered plate cover
128	Earth Pits- Copper plate Electrode with 6 mm thick chequered plate cover
129	GI Strip (50X6) mm
130	GI Strip (25X3) mm
131	Arrangement for Earthing of LCV with Flexible green Cu wire (25 sqmm of approx 30 Meter length) ,Clamp (including bolting arrangement) ,Flexible PVC, crcodile clamps(2 nos.each) and other item etc. including MS enclosure box with door of sheet thk (2.00mm) color etc.
132	Installation of GI lightning rod 25 mm dia. 1800 mm long including all labour etc. complete as per approved drawings, specifications and directions of Engineer-In-Charge.
133	Installation of Advance maintenance free earthing system with 3mtr earth electrode of low carbon steel with 250 micron copper coating with carbon based backfill compound as per IS 3043/IEEE-80.
134	Installation, Testing and Commissioning, Laying including packing and forwarding, transportation, delivery at storage, of the 1.1kV grade XLPE insulated, PVC sheathed, FRLS power and control cables (conforming to IS:7098 and specification) including Cable glands & Lugs etc.of following sizes in trenches/ excavated under ground trench /trays, pulling through pipes and its proper sealing, cutting of paved area, roads etc.
135	3.5x 120 mm2 A2XFY
136	3.5x 95 mm2 A2XFY
137	3.5x 35 mm2 A2XFY
138	3.5x 50 mm2 A2XFY
139	4x 25 mm2 A2XFY
140	4x10 mm2 2XWY
141	4x 6 mm2 2XWY
142	4x 2.5 mm2 2XWY
143	Laying and Commissioning including labour, transportation, delivery at storage, of the 2.5 mm2, 1.1kV grade XLPE insulated, PVC sheathed, FRLS 2XWY Copper cable
144	Installation, Testing and Commissioning of following sizes of HDPE Pipe
145	50 mm NB
146	80 mm NB
147	100 mm NB
148	150 mm NB
149	Installation, Testing and Commissioning of point wiring as per details in construction drawing & specification includes PVC conduits in ceiling, complete wiring including flexible wire (FR PVC), switch boxes & switches (ANCHOR ROMA make or equivalent), Multi strand Flexible HR PVC insulated copper conductor wires/cables for following items-
150	Surface/ recess mounted LED light fixrure with LED lamp (type LCTLRN-36-FO-CDL - 2 X 2 ft of CG make or equivalent).
151	Surface/ recess mounted LED light fixrure with LED lamp (type LCTLRN-18-FO-CDL - 2 X 2 ft of CG make or equivalent).
152	Industrial Flame proof fluorescent lamp/LED fitting with lamp (type EXTL 240 of CG make or equivalent).
153	Exhaust fan (Industrial type 300/450 mm) with louvers,950 rpm,55watt with flap.
154	Flame Proof (CMIFR approved) 12\\" Exhaust Fan.0.25HP motor,1440 rpm. (Preferred Make: Baliga, FCG, CGL, Prompt)
155	Socket outlet (5/15 Amp combination) of ANCHOR ROMA make or equivalent
156	20 Amp sheet steel enclosed industrial type socket with 20 Amp DP MCB for AC.
157	Ceiling fan with electronic regulator ( Energy efficent, 50W, 1200 mm sweep)
158	Wall mounted fan with electronic regulator ( Energy efficent, 50W,) etc complete in all respect for wall mounting
159	SOLAR SYSTEM FOR OUTDOOR EMERGENCY LIGHTING
160	Erection,testing and commissioning of Solar Street lighting system complete with GI pole and GI mounting bracket, control gear box, internal cable from fitting to junction box, and 15W LED fixture (Fixtures Bajaj Make or equvalent and Battery make Exide, Amron etc), three days battery backup with solar Module, earthing, electronics, dusk-dawn operation etc including pipe inserts for cables and connecting work and commissioning spares as required, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Nominal height of GI pole shall be 6m. Work to be completed in all respects.
161	Installation, Testing and Commissioning of following including necessary clamp, bolts, rawl plugs etc.
162	Shock hazard charts
163	First Aid Boxes
164	Carbon-di-oxide(CO2) type fire extinguisher 4.5 Kg capacity Complete with gunmetal valve conforming to IS : 3224 With ISI mark, Discharge horn with bend & wall fixing Bracket With Mfg. Test certificate.
165	Caution boards
166	Single Line Diagram in teak wood wall cabinet with glass door
167	Wooden key box with glass cover
168	Installation and laying of 1.1kV grade insulated mats required for maintenance of electrical equipment in substation as required including cutting to required shape in running length and including all labour and materials etc. complete and as per directions of Engineer-In-Charge as per IS 15652 and Indian Electricity Rules.
169	Erection testing and commissioning of following Hot Dip Galvanized Ladder/Perforated Type cable trays (as per IS 2629) including bends, tee, crosses,horizontal and vertical splices along with cable tray cover(Wherever required for Asthetic look ) etc. as required including supply of all G.I hardwares, all labour and material as required as per standard drawings, specification and direction of Engineer-in-charge.Perforated type, made from 50mm height and 2.5 mm thick sheet steel & galvanized (86 microns) of following sizes.
170	150mm wide
171	300mm wide
172	Painting work of 2 Coats of Primer Painted & Fabricated support structure.
173	UPS SYSTEM
174	Installation, Testing and Commissioning, packing, forwarding, delivery by equipment supplier at site including commissioning spares as required of UPS systems as per specification, datasheet, block diagram of the following rating :
175	3KVA, 50 Hz, Industrial Type,single UPS system suitable for input Power Installation, Testing and Commissioning voltage of 320V-460V- TPN (184-265V/Ph) , output 230 V +/- 1%, AC with Bypass Installation, Testing and Commissioning, Battery Bank , and 2.0 hrs. Battery backup (VRLA, 12V) and battery capacity shall not be less than 14 KVAh (where KVAH = battery AH x 12 V x No. of Batteries). Charger rating shall not be less than 6.5 kW. All interconnecting cables among UPS, Rectifier, battery stand, ACDB etc (30 mtr shall be considered between battery bank and UPS panel, 30 mtr cable shall be considered between ACDB and UPS panel and any other cable which is not defined here but necessary for satisfactory operation of the UPS system).
176	230V, 36 KA single front type indoor wall mounted ACDB to receive input from UPS consisting of Incomer 32A DP MCB & Outgoing 10 Nos. 6A to 10A DP MCB, complete with wiring, indication lamp, ammeter, voltmeter etc including all labour and materials with operating mechanism & all accessories.
177	Erection Material
178	Installation,welding and Commissioning of MS base frame support for switch gear and bracket for misc. electrical equipment,cable tray support out of roled MS section,pipes,plates etc including welding, bolting, reveting, Installation, Testing and Commissioning of necessary anchor bolts and grouting etc Installation, Testing and Commissioning of paints applying one coat of anti rust primer two finish coats of approved synthetic enamel paints including bracking walls, floors etc for structure as required including Installation, Testing and Commissioning of all GI hardware materials including all labour and materials complete as required and the direction of Engineer-in-charge.
179	For COCO/RO/OLS/MS/DBS/DCU
180	Installation, Termination and Commissioning of electrical accessories including, cable tags, cable tie ,Flexible pvc conduit,cable marker, nickle plated lugs, double compressed brass cable glands,brass adaptar/reducers/nipples, fixing of metallic anchor fasteners for supporting of cable trays and misc. electrical switchgear including all labour and materials complete as required and as per directions of Engineer-In-Charge.
181	For COCO/RO/OLS/MS/DBS/DCU
182	Civil Construction of required material for the construction of Cable pit with pit cover (SFRC cover HD-20 of IS-12592) including civil works repair, concrete wall/brick wall & its materials, cable conduits interface & its water sealing, cable support structure including all labour and materials complete in all aspect as per approved drawings and directions of Engineer-In-Charge.
183	500X500(of inside clearance)X 600(Depth)
184	750X750(of inside clearance)X800(Depth)
185	1000X1000(of inside clearance)X1000(Depth)
186	MECHANICAL & TUBING WORKS
187	SS TUBE LAYING & TESTING
188	Laying of SS Tubes with PVC tube clamp, Hydro testing at 375 bar and commissioning of SS tubes along with fittings, hose, mass flow meter and valves as given below and as per Technical Specification and scope of work including handling, lifting, transportation from stores to location of CNG stations.
189	1”OD X 0.120” min Wall thk. SS Tube
190	¾”OD X 0.095” min Wall thk. SS Tube
191	½”OD X 0.083” min Wall thk. SS Tube
192	Supply of SS Tubes as per Technical Specification
193	1”OD X 0.095” min Wall thk.,Material SS316 SS Tube (Refer TS)
194	¾”OD X 0.095” min Wall thk.,Material SS316 SS Tube (Refer TS)
195	½”OD X 0.083” min Wall thk.,Material SS316 SS Tube (Refer TS)
196	Note: Quantities beyond mentioned quantities may be provided as free issue.
197	Supply of SS Fittings
198	Union
199	Size : 1\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
200	Size : ¾” OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
201	Size : ½\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
202	Reducing Union
203	Tube OD 3/4\\" x Tube OD 1/2\\", Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
204	Tube OD 1\\" x Tube OD ¾\\", Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
205	1/2\\" NPT male to 3/4\\" OD Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
206	Equal Tee
207	Size:1\\" OD x 1\\" OD x 1\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
208	Size:3/4\\" OD x 3/4\\" OD x 3/4\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
209	Size:½” OD x ½” OD x ½” OD, Material:SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
210	¾ \\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
211	½\\" OD, Material : SS316(Rated pressure : 6000 PSI @ 70°F Temperature : 0°F to 400°F)
212	1\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
213	Front Ferrule
214	3/4\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
215	½\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
216	1\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
217	Back Ferrule
218	3/4\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
219	½\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
220	1\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
221	Size : ¾\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
222	Size : 1\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
223	Size : ½\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
224	Size : ¾\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
225	Size : 1\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
226	Size : ½\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
227	Cross
228	3/4\\" OD X 3/4” OD X 3/4\\" OD X 3/4\\" OD Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
229	Quick Connect Body & Stem
230	End connection:½\\" Tube OD, for stem & ½”NPT (F) for body Material : SS316; Rated pressure : 5000 PSI @ 70°F Temperature: 0°F to 400°F
231	Reducing Union Tee
232	¾\\" OD x ½\\" OD x ¾\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
233	Tube End Connection
234	½” Tube End & ¾” OD with Ferrule Fitting, SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
235	Male Connector
236	Size ¼” NPT (M) x 3/8” OD, SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
237	Size 1/2” NPT (M) x 3/8” OD, SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F)
238	Supply of SS Ball Valves conforming to Technical Specification for SS Ball Valves of following sizes, specifications as indicated below :
239	2-Way Floating Normal Bore Ball Valve ¾\\"
240	3-Way Trunnion Mounted, Reducer Bore Ball Valve ½\\" OD end Connection and ¼” NPT (F) bottom end connection
241	2-Way Floating Normal Bore Ball Valve 1/2\\"
242	SUPPLY OF HIGH PRESSURE CNG HOSE ASSEMBLY (CONDUCTIVE CORE THERMOPLASTIC HOSE ASSEMBLY)
243	Design, Manufacture, testing, Loading , Supply,Transportation & Unloading at GGL stores of 1/2” ID Conductive Core Thermoplastic Hose of 5.0m length for CNG Service with break away coupling along with Quick connect body & stem (End connection:½\\" Tube OD for stem & ½”NPT (F) for body, Material : SS316; Rated pressure : 5000 PSI @ 70°F Temperature: 0°F to 400°F) .One end of the hose shall be 1/4\\" NPT(M) and other end of the hose shall be 3/4\\" OD.Supply and assembling of all necessary fittings with the hose for making the end conncetions as indicated above are in the scope of contractor.
244	ERECTION OF MECH. EQUIPMENT
245	Handling (including lifting and transportation from Client's store within GA to CNG stations) and erecting in position, the following equipment either on the foundation or on roof at ~ 3 to 4 m above ground level. Contractor's scope includes supply of all material and accessories including but not limited to any fixtures, clamps, gasket, nut bolts, etc.. Scope also includes supply of all lifting tools / necessary accessories and hiring of cranes for same.
246	Type-I; Cascade 4500/3000 L water capacity. Erection at + 3.0 to 4.0 M level
247	Type-I; Cascade 4500/3000 L water capacity, Erection at + Ground level
248	Type-IV; Cascade 8800 Water capapcity, Erection at 0.0 level
249	Decompression unit-The item also includes supervision of OEM required for installation and commissioning of the equipment at station.
250	DISMANTLING, SHIFTING, RE-INSTALLATION & COMMISSIONING OF CNG Decompression unit and Conversion of DBS to Online
251	Dismantling,disconnecting cables,earthing, SS tube,pipe, removal of Decompression unit/Daughter Booster Compressor along with related accessories from one Station within GA and shifting/transportation including loading, unloading and then installation, erection, testing and commissioning of same equipment along with accessories, cables at other station within GANote: The above item also includes breaking/dismantling of foundation if required, supply of pipes/cables ,pipe fittings, foundation bolts, supervision of OEM required for installation and commissioning of the equipment at other station.
252	Handling including lifting and transportation of dispenser frame from Client's store within city to CNG stations and Erection at + Ground Level
253	The quantities given above against individual items are indicative and shall not be considered to be binding. The quantities may increase or decrease at site at the time of actual execution and as per the discretion of Owner/ Engineer-in-charge. The unit rate shall be operated to work out the final payment due to Contractor.
254	ERECTION OF MECH. EQUIPMENT
255	Supply, erection & commissioning of following miscellaneous items as per technical specification and at locations (within the stations) as directed by EIC
256	Fire fighting Equipments
257	Stored Pressure Type DCP -9 Kg confirming to IS 15683 and as per TS
258	DCP -75 Kg confirming to IS 10658 and as per TS
259	CO2 – 4.5 Kg confirming to IS 15683 and as per TS
260	Sand Bucket Stand with 4 Nos. Bucket and as per TS
261	Design, manufacture, assembly,testing & supply as well as installation, testing and commissioning of LCV Filling post consisting of the following.-4” Pressure Gauge for pressure monitoring of CNG,-1/2” ID Conductive Core Thermoplastic Hose of 5.0m length for CNG Service with break away coupling along with Quick connect body & stem (End connection:½\\" Tube OD for stem & ½”NPT (F) for body, Material : SS316; Rated pressure : 5000 PSI @ 70°F Temperature: 0°F to 400°F) .One end of the hose shall be 1/4\\" NPT(M) and other end of the hose shall be 3/4\\" OD.Supply and assembling of all necessary fittings with the hose for making the end conncetions as indicated above are in the scope of contractor.-3-Way Trunnion Mounted, Reducer Bore Ball Valve ½\\" OD end Connection and ¼” NPT (F) bottom end connection-2-Way Floating Normal Bore Ball Valve ¾\\"-Necessary SS tubing of sizes 3/4\\"OD and 1/2\\"OD, tube fittings-Vent tube -Required Structural frame and tube supports shall be payable through Structural SOR
262	STEEL STRUCTURAL WORKS
263	Structure Steel Works for Miscellaneous Structures like Grating , Handrails , Hoardings etc
264	Supplying, Fabricating & Erecting in position steel structures fabricated out of MS Girders, channels, Tees, angle, flats, plate, square hollow sections pipes etc. conforming to IS:2062 and/or from pipes conforming to IS:1161 for structural purpose for cascade supporting structure, loading/unloading platform, Gratings for platform, catladder,handrails, hoardings for sinages,Lcv stand, etc. of any size/dia for required design including cutting, welding, bolting, hoisting, fixing in position, including application of one coat of primer at shop and second coat of primer at site after erection and two coats of finishing paint at site .The work is to be completed in all respect as per specification ,scope of work, detailed construction drawings and directions of the Engineer-in-charge.
265	[ Rate to include cost of all labour, nut, bolts, tools, tackles, hire charges royalties, levies, transportation, scrap value, gas cutting, welding, other consumables, paints, compressed air, water, electric power etc. all complete.]
266	Providing and fixing Fencing Gates
267	Supplying, fabricating & fixing fencing gates fabricated from pipes conforming to IS:1161 and plates conforming to IS:2062 & fixing of GI weldmesh made from 3mm GI wire @ 75 mm bothways to structural steel frame by means of welding/bolting, painting with enamel paint in approved shade including supply of all raw materials, bolts, electrodes, transportation etc complete as per enclosed sketch, technical specifications and directions of the Engineer-In-Charge.
268	4m Wide x 2.1m High
269	2m Wide x 2.1m High
270	Providing and Fixing 6 O/P Chequered Plate Covers
271	Providing and fixing chequered plate in approved panel or over steel structure including cutting, welding, hoisting, fixing in position, and applying two or more coats of approved quality synthetic enamel over a priming coat of approved steel primer etc complete as per scope detailed drawings , technical specifications and directions of the Engineer-In-Charge.
272	[Rate to include cost of all labour, nut, bolts, stiffening sections, bars tools, tackles, hire charges, royalties, levies, transportation, scrap value, gas cutting, welding, other consumables, paints, compressed air, water, electric power etc. all complete.]
273	Providing and fixing Fencing Structure
274	Supplying, fabricating & fixing steel structural fencing fabricated from pipes conforming to IS:1161 and plates conforming to IS:2062 & fixing of GI weldmesh made from 3mm GI wire @ 75 mm bothways to structural steel frame by means of welding/bolting, including applying two coats of approved quality of synthetic enamel paint over a priming coat of in approved shade including supply of all raw materials, bolts, electrodes, transportation, including making pokets & pouring with PCC (1:2:4) in of block 500x500x500 for fixing of posts etc complete as per enclosed drawing, technical specifications,scope of works and directions of the Engineer-In-Charge.
275	Fencing height 2.1m
276	CIVIL WORKS
277	Site clerance and earth Work
278	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth for all leads and lifts, Excavated portion to be neatly rammed, leveled, dressed & compacted to receive bed concrete.Carting away excess excavated earth / debris as directed by the Engineer In Charge outside the premises to any place within GA designated by the local authority from site by mechanical transport.Item also include cutting and removing of bushes /tress upto 30cm girth (to be measured at 1.0m above ground) etc. (Approval of location of disposal from local authority is in scope of contractor.)
279	All kinds of soil
280	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan but upto depth of 3.0m) including dewatering of both ground and surface water in all season, removal of slurry generated while excavation and keeping the area free of water with necessary shoring, strutting required for keeping earth in position etc. and packing cavities (wherever required) including disposal of excess excavated earth and stacking of required excavated earth, for all leads and lifts, Excavated portion to be neatly rammed, leveled, dressed & compacted to receive bed concrete.Carting away excess excavated earth / debris as directed by the project manager outside the premises to any place designated by the local authority from site by mechanical transport. ( Approval of location of disposal from local authority to be in scope of contractor.)
281	All kinds of soil
282	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan but upto depth of 3.0m) including dewatering of both ground and surface water in all season, removal of slurry generated while excavation and keeping the area free of water with necessary shoring, strutting required for keeping earth in position etc. and packing cavities (wherever required) including disposal of excess excavated earth and stacking of required excavated earth, for all leads and lifts, Excavated portion to be neatly rammed, leveled, dressed & compacted to receive bed concrete.Carting away excess excavated earth / debris as directed by the project manager outside the premises to any place designated by the local authority from site by mechanical transport. ( Approval of location of disposal from local authority to be in scope of contractor.)
283	Ordinary rock
284	Felling of trees of the girth (measured at a height 1 m above ground level ) including cutting of trunks and branches , removing the roots and stacking of serviceable materials and disposal unserviceable material.
285	a) beyond 30 cm Girth upto and including 60 cm girth
286	b) Beyond 60 cm girth upto and including 120 cm girth
287	c) Beyond 120 cm girth upto and including 240 cm girth
288	d) Beyond 240 cm girth
289	Earthwork in excavation and backfilling in layer of 200mm for foundations of buildings, basements, pipe supports, equipments as well as for manholes, plinth, tunnels, trenches for pipes & sewers & storm water drains, culverts etc., in ordinary and hard soils in both dry and wet conditions including pumping and bailing out surface and subsoil water (dewatering), shoring, strutting, slush removal at all heights and depths as per drawing and specifications wherever required , and backfilling in foundation pits and other places with excavated suitable surplus earth, including reclaiming from other soil heaps kept elsewhere and dressing and levelling,watering and mechanical compaction etc.,transporting surplus unserviceable soil to a place within GA and spreading in layers as per specifications or heaping up to any heights and as per the direction of Engineer Incharge. The Measurement for payment shall be for the theoretical volume only i.e., the volume of the block of the excavation having maximum bottom dimension of the foundation as per drawing.(Approval of location of disposal from local authority is in scope of contractor.)
290	(The Contractor shall take into account in his rate the provision for excess excavation for necessary working space, slope etc., required for excavation and other allied works and refilling the side slopes and working space as mentioned in the specification).
291	For depth upto & including 1.50 m
292	For depth beyond 1.50 m and upto & including 3.00 m
293	Extra FOR disposal of surplus earth beyond initial lead of 50m upto 10 KM
294	Earth filling from available earth (excluding rock) under floors and other places with special compaction to achieve dry density of 95% standard proctor density including cost of excavation, reclaiming from soil heaps within work premises as per instruction of the EIC at all heights/depths, transporting, depositing, compacting and dressing, trimming complete as desired in layers not exceeding 15 cms including watering, consolidating by mechanical means as per specifications and instructions of the EIC.
295	a) With available good quality earth
296	Earth work in filling with good quality imported earth from approved source in the layers of 150 mm and compacted up to 95% to its MDD and any plan dimension including all testing, watering, rolling each layer with roller or wooden or steel rammers, and every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing / filling up ground depressions etc. complete in all respect as per scope of work, detailed construction drawings , as per technical specifications and directions of the Engineer-in-charge.
297	CEMENT CONCRETE
298	Supplying and laying plain cement concrete of the following proportions at all leads and lifts in all levelling courses under foundations, floors, pipelines, trenches, pits etc. using graded stone aggregate 20 mm max. size and down including mechanical mixing, transporting,shuttering (if required) consolidation, finishing, curing etc. complete,as per specifications, drawings and instructions of the Engineer Incharge.
299	M-15 1:2:4
300	M-10 1:3:6
301	STEEL REINFORCEMENT
302	Supplying, fabricating and fixing in position TMT steel reinforcements of grade Fe 500 at all levels and positions, all leads and lifts including the cost of transport, straightening, cutting, bending, cranking, binding, fixing, tying in position with annealed binding wire, welding provision of necessary chairs and spacers, including tying and bending dowel bars and their straightening upon deshuttering (wherever necessary) as per drawings and specifications and including cost of binding wire, labour, cover blocks in CM 1:2 etc., all complete for reinforced concrete as per specifications, drawings and instructions of the Engineer Incharge.
303	a) Reinforcement conforming to Grade Fe-500 of IS : 1786-2008 ( TMT bars from SAIL /RINL/TATA STEEL/JSW )
304	1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as steel Reinforcement, binding wire and other minor construction materials, testing etc. all bye works and sundry works. 2. Chairs, Laps, Spacers, Wastage etc. shall be to contractor's account.
305	Supplying and Laying of design mix,Reinforced Cement Concrete of following Grades at all depths and heights in all types of Foundations, Footings, equipment foundations,columns, pedestal,wall, lintels, ducts, beams, brackets, slabs of all shapes, sills, parapets,bands and any other works both in sub and Superstructures all complete with all bye works as per Drawings, Specification and instruction of Engineer. (The rates shall include the cost of necessary shuttering but excluding the cost of steel reinforcement)
306	M-25 Grade Design Mix Concrete using ordinary portland cement (20 mm down graded coarse aggregate.) UPTO PLINTH LEVEL
307	M-25 Grade Design Mix Concrete using ordinary portland cement (20 mm down graded coarse aggregate.) ABOVE PLINTH LEVEL
308	1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade OPC cement, other minor construction materials, shuttering , staging, removal of form work, testing of concrete, curing etc. except reinforcement steel with all bye works and sundry works complete. 2. Mix deisgn shall be prepared confirming to relevant IS Codes ( IS 10262, SP.23 & IS 456 Latest Codes) from NABL approved lab and the same shall be approved by EIC.
309	Providing, constructing and finishing of compound wall in RCC frame structure with precast RCC wall panels of 100mm thickness mounted on in-situ RCC columns of 400mmx450mm size at an interval of 3.0 m or as specified in construction drawing and height 2m as specified as per scope of work , including plastering, coping, painting, whitewash,concertina coil, embossing of logo of the client, on all columns, finishes all complete as per technical specifications, tender drawing and direction of the Engineer-In-Charge.
310	1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade OPC cement, pre cast wall panels ,ISMC channel section,hard drawn steel wire fabric as per IS 1566 ,RCC M25, concertina coil, RBT , finishes, bitumen, Y angle, other minor construction materials, shuttering, staging, coping, expansion gap filling with \\"Capcell\\" armoured board of \\"Supreme\\" make or equivalent and white sealant material, plastering,painting and all other sundry works.
311	2. Foundation/ sub-structure to be paid separately in respective SOR items.
312	3.Reinforcement for columns and beam for superstructure shall be paid separately in respective SOR Item.
313	Supplying & grouting for Foundations bolt holes/pockets for Equipments, Base plates, Anchoring etc, with cement based non shrink compound such as Shrinkomp of ACC or approved make of FOSROC/SIKA/ROFF including shuttering at all levels and as per drawings, specification and direction of Engineer in charge.
314	Providing and laying roof screed with M-15 grade concrete (12 mm down graded coarse aggregate) at all leads and lifts with wooden trowel finish and required slope including mixing of water proofing compound as per manufacturer's specification, curing etc. , as per drawings and direction of Engineer Incharge.
315	CC BLOCK work
316	Providing and laying cement blocks (solid blocks) masonry mix ratio of 1 :1.5:3 with 200 mm thick blocks upto plinth level and super structure above plinth level up to top level of building in cement mortar 1:3 (1 cement : 3 coarse sand ).
317	Upto Plinth level
318	Above plinth level
319	Brick work with bricks of class designation M 7.5 Grade with Mortar 1:6 (1 Cement: 6 Coarse sand) in all levels.
320	Providing and fixing 100mm thick M-25 factory made RCC drain/trench cover including cost of shuttering and minimum reinforement@ 10mm dia TMT Fe-500 bars @100mm c/c bothway in two layers as per direction of Engineer In Charge.The RCC cover shall have edge protection with 100mm wide 1.6mm thick MS sheet all around alongwith 2 nos 12 mm dia bar for hook etc complete including painting of MS sheet.
321	Providing and fixing 150mm thick M-25 Pre cast RCC drain/trench cover including cost of shuttering as per drawing and direction of Engineer In Charge. The RCC cover shall have edge protection with 150mm wide 1.6mm thick MS sheet all around alongwith 2 nos 16 mm dia bar for hook etc complete including painting of MS sheet. Reinforcement shall be paid in respective SOR Item.
322	Providing and laying R.C.C.(M25 Grade concrete) vacuum dewatering concrete flooring with floor hardener of approved make to be sprinkeled at the rate of 5 kg/sqm before mechanical troweeling as per manufacturer's specifications including mixing, tamping mechanically, consolidating, leveling cement concrete of grade M25 in grade slab, 200/150 thick including suction drying, mechanical trowelling (power float) and finishing, curing, cutting expansion grooves and filling expansion grooves with polysulphide joint fillers complete as specified and directed including shuttering but excluding reinforcement, including doweled construction joints as per drawings.
323	FINISHING
324	12 mm cement internal plaster on walls of all heights at all levels in perfect line and level
325	18 mm external cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:5 (1 cement : 5 fine sand) for all heights and levels in perfect line and level
326	Painting with APEX/Wheathershield make exterior paint with one coat of primer and two or more coat of approved paint on new work wherever required to achieve even shade and colour for all heights and levels.
327	Providing and laying paving of pre cast concrete interlocking pavers made of M30 grade concrete of 80 mm thickness of approved colour combination, pattern make, size, of compressive strength 300KG /sq cm. Paver blocks should be laid on sand cushion as required with a gap of 1.5mm between the blocks filled with sand including paving and curb gap to be filled with concrete of same grade of concrete pavers
328	DISMANTLING/DEMOLISHING
329	Demolishing of Cement Concrete (PCC) of all grades manually/mechanical means including disposal of debris as directed by the Engineer. Debris shall be disposed outside the site and this shall be entirly Contractor's responsibility irrespective of any Lead.
330	Demolishing of RCC of all grades manually/ mechanical means including disposal of debris as directed by the Engineer. Debris shall be disposed outside the site and this shall be entirly Contractor's responsibility irrespective of any Lead.
331	Giridih-Dhanbad
332	PART - I : Electrical Works
333	Electrical Works Supply
334	Supply including packing and forwarding, transportation, delivery at storage to site 63kVA, 11/0.433kV Outdoor type, 3 Ph, 50Hz, Cu wound, Dyn11,ONAN Distribution Transformer complete with all accessories and first oil filled as per tender speciifcation. Transformer shall be as per SEB approved make. (Star rating / Efficiency class of transformer shall be as per SEB standard during executiion).
335	Supply including packing and forwarding, transportation, delivery at storage to site 25kVA, 11/0.433kV Outdoor type, 3 Ph, 50Hz, Cu wound, Dyn11,ONAN Distribution Transformer complete with all accessories and first oil filled as per tender speciifcation. Transformer shall be as per SEB approved make. (Star rating / Efficiency class of transformer shall be as per SEB standard during executiion).
336	Supply of 11kV double pole structure with 9 mtr RCC poles including cross bracing’s of ISMC ,GOS with earth switch, polymeric type LA’s & pin insulator, HG fuses, ACSR conductor, stay sets, earthing, alkathine tube etc. as per the specification including civil works. Make of all components shall be as per SEB approved make.
337	Supply of Switchboards
338	Design, engineering, manufacture, shop testing, supply including packing and forwarding, transportation, delivery at storage and from storage to site of power distribution board (PDB) :
339	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD & as per standard Specification.
340	Single In-comer of 125 Amp (with Single phase preventer) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) along with VMR.
341	Outgoing with 01 no. 80 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for Booster Compressor.
342	Outgoing with 01 no. 63 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for APFC panel.
343	Outgoing with 02 nos. 32 Amp TPN MCCB (with TM based O/C, S/C & E/F RELASE) for UPS and Static Bypass.
344	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
345	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
346	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD no. & as per standard Specification.
347	Single In-comer 100A (with Single phase Protection ) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) etc as required along with VMR.
348	Outgoing with 3 nos. 63 Amp 4 pole MCCB (with TM based O/C,S/C & E/F RELASE) for i)Auxiliaries of Engine driven compressor like Exhaust fan/ lighting, etc ii) Air Compressor iii) APFC Panel
349	Outgoing with 2 nos. 32 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for UPS and Static Bypass.
350	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
351	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
352	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD & as per standard Specification .
353	Single In-comer 63A (with Single phase Protection ) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) etc as required along with VMR.
354	Outgoing with 2 nos. 32 Amp 4 pole MCCB (with TM based O/C,S/C & E/F RELASE) for i)Auxiliaries of DCU Unit ii)Spare
355	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
356	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
357	Floor mounted APFC Panel of 10KVAR capacitor bank in steps of 4x2.5 KVAR capacitors consisting of bus bar chamber, cable alley incoming (FSU), outgoing feeder (FSUs) as specified in tender specification
358	Outdoor type dust & weather proof sheet steel (2 mm thick) enclosed MCCB of following rating for mounting on wall or pedestal. 125A, 415V, 4 Pole, AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals and outgoing terminals, with RYB indication.
359	Outdoor type dust & weather proof sheet steel (2 mm thick) enclosed MCCB of following rating for mounting on wall or pedestal. 100A, 415V, 4 Pole, AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals and outgoing terminals, with RYB indication.
360	Supply including packing and forwarding, transportation, delivery at storage of lighting fixtures complete with mounting bracket, flame proof/non flame proof, control gear box/ Junction Box ,glands ,lugs as per the type of fixture, lamps etc. including civil work with pipe inserts for cables and connecting work, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Work to be completed in all respects.
361	Street lighting, integral flame proof well glass fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 72 W LED luminaire with flame proof control gear/ Junction box (Model no. FLPW-1095 of Baliga make or equivalent)
362	Supply of Integral flame proof Flood Light fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 72 W LED luminaire (Baliga make or equivalent)
363	Supply of Street lighting pole 6mtr high GI octagonal pole (Type BOP-6030 of Bajaj make or equivalent) complete with bracket, GI clamps for fixing flame proof control gear box as per standard drawing & specification.
364	Design, engineering, supply including packing and forwarding, transportation, delivery at storage, of the complete earthing and lightning protection system, earth electrodes/ pit, earth main ring, earthing of electrical equipments, instrument panels, field instruments, process equipments and pipes/ flanges including all associated civil work with all material (Like Bitumen coating) and labour as per specification and drawings approved by the company in with IS 3043.
365	Earth Pits- GI PIPE Electrode (size 3.0 m long, 65NB Class-B) with 6 mm thick chequered plate cover
366	Earth Pits- Copper plate Electrode with 6 mm thick chequered plate cover
367	GI Strip (50X6) mm
368	GI Strip (25X3) mm
369	Arrangement for Earthing of LCV with Flexible green Cu wire (25 sqmm of approx 30 Meter length) ,Clamp (including bolting arrangement) ,Flexible PVC, crcodile clamps(2 nos.each) and other item etc. including MS enclosure box with door of sheet thk (2.00mm) color etc.
370	GI lightning rod 25 mm dia. 1800 mm long including supply of all hardware bare copper rope labour etc. complete as per approved drawings, specifications and directions of Engineer-In-Charge.
371	Advance maintenance free earthing system with 3mtr earth electrode of low carbon steel with 250 micron copper coating with carbon based backfill compound as per IS 3043/IEEE-80.
372	Design, engineering,supply including packing and forwarding, transportation, delivery at storage, of the 1.1kV grade XLPE insulated, PVC sheathed, FRLS power and control cables (conforming to IS:7098 and specification) including Cable glands & Lugs etc.of following sizes in trenches/ excavated under ground trench /trays, pulling through pipes and its proper sealing, cutting of paved area, roads etc.
373	3.5x 120 mm2 A2XFY
374	3.5x 95 mm2 A2XFY
375	3.5x 50 mm2 A2XFY
376	3.5x 35 mm2 A2XFY
377	4x 25 mm2 A2XFY
378	4x10 mm2 2XWY
379	4x 6 mm2 2XWY
380	4x 2.5 mm2 2XWY
381	Design, engineering, supply including packing and forwarding, transportation, delivery at storage, of the 2.5 mm2, 1.1kV grade XLPE insulated, PVC sheathed, FRLS 2XWY Copper cable
382	Supply of following sizes of HDPE Pipe as per approved drawings and directions of Engineer-In-Charge.
383	50 mm NB
384	80 mm NB
385	100 mm NB
386	150 mm NB
387	Supply of point wiring as per details in construction drawing & specification includes PVC conduits in ceiling, complete wiring including flexible wire (FR PVC), switch boxes & switches (ANCHOR ROMA make or equivalent), Multi strand Flexible HR PVC insulated copper conductor wires/cables for following items-
388	Surface/ recess mounted LED light fixrure with LED lamp (type LCTLRN-36-FO-CDL - 2 X 2 ft of CG make or equivalent).
389	Surface/ recess mounted LED light fixrure with LED lamp (type LCTLRN-18-FO-CDL - 2 X 2 ft of CG make or equivalent).
390	Industrial Flame proof fluorescent lamp/LED fitting with lamp (type EXTL 240 of CG make or equivalent).
391	Exhaust fan (Industrial type 300/450 mm) with louvers,950 rpm,55watt with flap.
392	Flame Proof (CMIFR approved) 12\\" Exhaust Fan.0.25HP motor,1440 rpm. (Preferred Make: Baliga, FCG, CGL, Prompt)
393	Socket outlet (5/15 Amp combination) of ANCHOR ROMA make or equivalent
394	20 Amp sheet steel enclosed industrial type socket with 20 Amp DP MCB for AC.
395	Ceiling fan with electronic regulator ( Energy efficent, 50W, 1200 mm sweep)
396	Wall mounted fan with electronic regulator ( Energy efficent, 50W,) etc complete in all respect for wall mounting
397	SOLAR SYSTEM FOR OUTDOOR EMERGENCY LIGHTING
398	Design, manufacture, testing at works, supply, storage, transportation to site of Solar Street lighting system complete with GI pole and GI mounting bracket, control gear box, internal cable from fitting to junction box, and 15W LED fixture (Fixtures Bajaj Make or equvalent and Battery make Exide, Amron etc), three days battery backup with solar Module, earthing, electronics, dusk-dawn operation etc including pipe inserts for cables and connecting work and commissioning spares as required, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Nominal height of GI pole shall be 6m. Work to be completed in all respects.
399	Supply of following including necessary clamp, bolts, rawl plugs etc.
400	Shock hazard charts
401	First Aid Boxes
402	Carbon-di-oxide(CO2) type fire extinguisher 4.5 Kg capacity Complete with gunmetal valve conforming to IS : 3224 With ISI mark, Discharge horn with bend & wall fixing Bracket With Mfg. Test certificate.
403	Caution boards
404	Single Line Diagram in teak wood wall cabinet with glass door
405	Wooden key box with glass cover
406	Supply of 1.1kV grade insulated mats required for maintenance of electrical equipment in substation as required including cutting to required shape in running length and including all labour and materials etc. complete and as per directions of Engineer-In-Charge as per IS 15652 and Indian Electricity Rules.
407	Supply of following Hot Dip Galvanized Ladder/Perforated Type cable trays (as per IS 2629) including bends, tee, crosses,horizontal and vertical splices along with cable tray cover(Wherever required for Asthetic look ) etc. as required including supply of all G.I hardwares, all labour and material as required as per standard drawings, specification and direction of Engineer-in-charge.Perforated type, made from 50mm height and 2.5 mm thick sheet steel & galvanized (86 microns) of following sizes.
408	150mm wide
409	300mm wide
410	Supply of 2 Coats of Primer Painted & Fabricated support structure.
411	UPS SYSTEM
412	Design, engineering, manufacture, shop testing, supply, packing and forwarding, transportation, delivery at storage ,inspection, packing, forwarding, delivery including commissioning spares as required of UPS systems as per specification, block diagram and following rating:
413	3KVA, 230 V Single phase, 50 Hz, single industrial type, UPS system suitable for input Power supply voltage of 320V-460V-TPN with healthy single-Phase Selection, Output 230V +/-1%, AC with Bypass supply, Battery Bank, and 2.0 hrs. Battery backup (VRLA, 12V) and battery capacity shall not be less than 13.0 KVAh (where KVAH = battery AH x 12 V x No. of Batteries). As per enclosed Specification, Block diagram & Data sheet and shall be complete in all respect. Including All interconnecting cables among UPS, Rectifier, battery stand, ACDB etc (30 mtr shall be considered between battery bank and UPS panel, 30 mtr cable shall be considered between ACDB and UPS panel.
414	230 V, 36 KA single front type indoor wall mounted ACDB to receive input from UPS consisting of Incomer 32A DP MCB & Outgoing 10 Nos. 6A to 10A DP MCB, complete with wiring, indication lamp, ammeter, voltmeter etc including all labour and materials with operating mechanism & all accessories.
415	Erection Material
416	Supply of MS base frame support for switch gear and bracket for misc. electrical equipment,cable tray support out of roled MS section,pipes,plates etc including welding, bolting, reveting, supply of necessary anchor bolts and grouting etc supply of paints applying one coat of anti rust primer two finish coats of approved synthetic enamel paints including bracking walls, floors etc for structure as required including supply of all GI hardware materials including all labour and materials complete as required and the direction of Engineer-in-charge.
417	For COCO/RO/OLS/MS/DBS/DCU
418	Supply of electrical accessories including, cable tags, cable tie ,Flexible pvc conduit,cable marker, nickle plated lugs, double compressed brass cable glands,brass adaptar/reducers/nipples, fixing of metallic anchor fasteners for supporting of cable trays and misc. electrical switchgear including all labour and materials complete as required and as per directions of Engineer-In-Charge.
419	For COCO/RO/OLS/MS/DBS/DCU
420	Supply of required material for construction of Cable pit with pit cover (SFRC cover HD-20 of IS-12592) including civil works repair, concrete wall/brick wall & its materials, cable conduits interface & its water sealing, cable support structure including all labour and materials complete in all aspect as per approved drawings and directions of Engineer-In-Charge.
421	500X500(of inside clearance)X 600(Depth)
422	750X750(of inside clearance)X800(Depth)
423	1000X1000(of inside clearance)X1000(Depth)
424	ELECTRICAL WORKS - ERECTION
425	Installation, Testing and Commissioning of 63kVA, 11/0.433kV Outdoor type, 3 Ph, 50Hz, Cu wound, Dyn11,ONAN Distribution Transformer complete with all accessories and first oil filled as per tender speciifcation. Transformer shall be as per SEB approved make. (Star rating / Efficiency class of transformer shall be as per SEB standard during executiion).
426	Installation, Testing and Commissioning of 25kVA, 11/0.433kV Outdoor type, 3 Ph, 50Hz, Cu wound, Dyn11,ONAN Distribution Transformer complete with all accessories and first oil filled as per tender speciifcation. Transformer shall be as per SEB approved make. (Star rating / Efficiency class of transformer shall be as per SEB standard during executiion).
427	Installation, Testing and Commissioning of 11kV double pole structure with 9 mtr RCC poles including cross bracing’s of ISMC ,GOS with earth switch, polymeric type LA’s & pin insulator, HG fuses, ACSR conductor, stay sets, earthing, alkathine tube etc. as per the specification including civil works. Make of all components shall be as per SEB approved make.
428	STATUTORY APPROVALS, PERMISSIONS : Coordination & Liasioning with statutory authorities for obtaining Licence/NOC/ Approval /Permission with statutory authorities for GAIL Gas as required for setting of CNG stations .However, all the statutory payment required for such Licence/NOC/ Approval /Permission shall be reimbursed by GGL at actuals against production of documentary evidence and this statutory payment at actuals shall be over and above the coordination and liasioning charges in the items below. The bidder shall note that the rates for the items are inclusive of all expenses (except for statutory payments which shall be reimbursed on actuals) for carrying out the liasioning and coordination work till obtaining the final Licence/NOC/ Approval /Permission.To submit application on behalf of Gail gas to SEB for the incoming power Installation, Testing and Commissioning along with all the required documents, obtaining NOC from SEB for final charging, obtaining drawing approval from CEIG before commencemnt of work and obtaining safety & comissionming approval of Transformer by CEIG and SEB.The price shall be inclusive of Application Fee,liaisioning, Local Transport, Incidental travelling etc, and all other expenses.
429	Installation, Testing and Commissioning of Switchboards
430	Design, engineering, manufacture, shop testing, Installation, Testing and Commissioning including packing and forwarding, transportation, delivery at storage and from storage to site of power distribution board (PDB) :
431	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD & as per standard Specification.
432	Single In-comer of 125 Amp(with Single phase preventer ) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) along with VMR.
433	Outgoing with 01 no. 80 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for Booster Compressor.
434	Outgoing with 01 no. 63 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for APFC panel.
435	Outgoing with 02 nos. 32 Amp TPN MCCB (with TM based O/C, S/C & E/F RELASE) for UPS and Static Bypass.
436	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
437	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
438	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD & as per standard Specification .
439	Single In-comer 100A (with Single phase Protection ) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) etc as required along with VMR.
440	Outgoing with 3 nos. 63 Amp 4 pole MCCB (with TM based O/C,S/C & E/F RELASE) for i)Auxiliaries of Engine driven compressor like Exhaust fan/ lighting, etc ii) Air Compressor iii) APFC Panel
441	Outgoing with 2 nos. 32 Amp TPN MCCB (with TM based O/C,S/C & E/F RELASE) for UPS and Static Bypass.
442	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
443	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
444	415 V, 36 KA single front type indoor PDB to receive input power consisting of bus bar chamber, cable alley,outgoing with Fuse complete with wiring, indication lamp, ammeter, voltmeter, MFM (Multi Function Meter) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliaries with FLP LCS(Local Control switch) for tripping the main incomer of PDB etc complete in all respects as specified in technical specification, data sheet & SLD no. MEC/23VF/05/E9/E/1081D & as per standard Specification .
445	Single In-comer 63A (with Single phase Protection ) 4P MCCB (with Micro processor and based O/C,S/C & E/F RELASE with LSIG & Shunt trip) etc as required along with VMR.
446	Outgoing with 2 nos. 32 Amp 4 pole MCCB (with TM based O/C,S/C & E/F RELASE) for i)Auxiliaries of DCU Unit ii)Spare
447	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB with Timer(24Hrs) Auto/Mannual
448	Outgoing with 3 no. 40A Fuse and 3 nos. 10A DP MCB without Timer
449	Floor mounted APFC Panel of 10KVAR capacitor bank in steps of 4x2.5 KVAR capacitors consisting of bus bar chamber, cable alley incoming (FSU), outgoing feeder (FSUs) as specified in tender specification
450	Outdoor type dust & weather proof sheet steel (2 mm thick) enclosed MCCB of following rating for mounting on wall or pedestal. 125A, 415V, 4 Pole, AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals and outgoing terminals, with RYB indication.
451	Outdoor type dust & weather proof sheet steel (2 mm thick) enclosed MCCB of following rating for mounting on wall or pedestal. 100A, 415V, 4 Pole, AC-23 duty and suitable for termination of 3.5 x 95/50 sq.mm A2XFY cable on incomer terminals and outgoing terminals, with RYB indication.
452	Installation, Testing and Commissioning including packing and forwarding, transportation, delivery at storage of lighting fixtures complete with mounting bracket, flame proof/non flame proof, control gear box/ Junction Box ,glands ,lugs as per the type of fixture, lamps etc. including civil work with pipe inserts for cables and connecting work, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Work to be completed in all respects.
453	Street lighting, integral flame proof well glass fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 72 W LED luminaire with flame proof control gear/ Junction box (Model no. FLPW-1095 of Baliga make or equivalent)
454	Installation, Testing and Commissioning of Integral flame proof Flood Light fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 72 W LED luminaire (Baliga make or equivalent)
455	Installation, Testing and Commissioning of Street lighting pole 6mtr high GI octagonal pole (Type BOP-6030 of Bajaj make or equivalent) complete with bracket, GI clamps for fixing flame proof control gear box as per standard drawing & specification.
456	Installation, Testing and Commissioning including packing and forwarding, transportation, delivery at storage, of the complete earthing and lightning protection system, earth electrodes/ pit, earth main ring, earthing of electrical equipments, instrument panels, field instruments, process equipments and pipes/ flanges including all associated civil work with all material (Like Bitumen coating) and labour as per specification and drawings approved by the company in with IS 3043.
457	Earth Pits- GI PIPE Electrode (size 3.0 m long, 65NB Class-B) with 6 mm thick chequered plate cover
458	Earth Pits- Copper plate Electrode with 6 mm thick chequered plate cover
459	GI Strip (50X6) mm
460	GI Strip (25X3) mm
461	Arrangement for Earthing of LCV with Flexible green Cu wire (25 sqmm of approx 30 Meter length) ,Clamp (including bolting arrangement) ,Flexible PVC, crcodile clamps(2 nos.each) and other item etc. including MS enclosure box with door of sheet thk (2.00mm) color etc.
462	Installation of GI lightning rod 25 mm dia. 1800 mm long including all labour etc. complete as per approved drawings, specifications and directions of Engineer-In-Charge.
463	Installation of Advance maintenance free earthing system with 3mtr earth electrode of low carbon steel with 250 micron copper coating with carbon based backfill compound as per IS 3043/IEEE-80.
464	Installation, Testing and Commissioning, Laying including packing and forwarding, transportation, delivery at storage, of the 1.1kV grade XLPE insulated, PVC sheathed, FRLS power and control cables (conforming to IS:7098 and specification) including Cable glands & Lugs etc.of following sizes in trenches/ excavated under ground trench /trays, pulling through pipes and its proper sealing, cutting of paved area, roads etc.
465	3.5x 120 mm2 A2XFY
466	3.5x 95 mm2 A2XFY
467	3.5x 35 mm2 A2XFY
468	3.5x 50 mm2 A2XFY
469	4x 25 mm2 A2XFY
470	4x10 mm2 2XWY
471	4x 6 mm2 2XWY
472	4x 2.5 mm2 2XWY
473	Laying and Commissioning including labour, transportation, delivery at storage, of the 2.5 mm2, 1.1kV grade XLPE insulated, PVC sheathed, FRLS 2XWY Copper cable
474	Installation, Testing and Commissioning of following sizes of HDPE Pipe
475	50 mm NB
476	80 mm NB
477	100 mm NB
478	150 mm NB
479	Installation, Testing and Commissioning of point wiring as per details in construction drawing & specification includes PVC conduits in ceiling, complete wiring including flexible wire (FR PVC), switch boxes & switches (ANCHOR ROMA make or equivalent), Multi strand Flexible HR PVC insulated copper conductor wires/cables for following items-
480	Surface/ recess mounted LED light fixrure with LED lamp (type LCTLRN-36-FO-CDL - 2 X 2 ft of CG make or equivalent).
481	Surface/ recess mounted LED light fixrure with LED lamp (type LCTLRN-18-FO-CDL - 2 X 2 ft of CG make or equivalent).
482	Industrial Flame proof fluorescent lamp/LED fitting with lamp (type EXTL 240 of CG make or equivalent).
483	Exhaust fan (Industrial type 300/450 mm) with louvers,950 rpm,55watt with flap.
484	Flame Proof (CMIFR approved) 12\\" Exhaust Fan.0.25HP motor,1440 rpm. (Preferred Make: Baliga, FCG, CGL, Prompt)
485	Socket outlet (5/15 Amp combination) of ANCHOR ROMA make or equivalent
486	20 Amp sheet steel enclosed industrial type socket with 20 Amp DP MCB for AC.
487	Ceiling fan with electronic regulator ( Energy efficent, 50W, 1200 mm sweep)
488	Wall mounted fan with electronic regulator ( Energy efficent, 50W,) etc complete in all respect for wall mounting
489	SOLAR SYSTEM FOR OUTDOOR EMERGENCY LIGHTING
490	Erection,testing and commissioning of Solar Street lighting system complete with GI pole and GI mounting bracket, control gear box, internal cable from fitting to junction box, and 15W LED fixture (Fixtures Bajaj Make or equvalent and Battery make Exide, Amron etc), three days battery backup with solar Module, earthing, electronics, dusk-dawn operation etc including pipe inserts for cables and connecting work and commissioning spares as required, with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Nominal height of GI pole shall be 6m. Work to be completed in all respects.
491	Installation, Testing and Commissioning of following including necessary clamp, bolts, rawl plugs etc.
492	Shock hazard charts
493	First Aid Boxes
494	Carbon-di-oxide(CO2) type fire extinguisher 4.5 Kg capacity Complete with gunmetal valve conforming to IS : 3224 With ISI mark, Discharge horn with bend & wall fixing Bracket With Mfg. Test certificate.
495	Caution boards
496	Single Line Diagram in teak wood wall cabinet with glass door
497	Wooden key box with glass cover
498	Installation and laying of 1.1kV grade insulated mats required for maintenance of electrical equipment in substation as required including cutting to required shape in running length and including all labour and materials etc. complete and as per directions of Engineer-In-Charge as per IS 15652 and Indian Electricity Rules.
499	Erection testing and commissioning of following Hot Dip Galvanized Ladder/Perforated Type cable trays (as per IS 2629) including bends, tee, crosses,horizontal and vertical splices along with cable tray cover(Wherever required for Asthetic look ) etc. as required including supply of all G.I hardwares, all labour and material as required as per standard drawings, specification and direction of Engineer-in-charge.Perforated type, made from 50mm height and 2.5 mm thick sheet steel & galvanized (86 microns) of following sizes.
500	150mm wide

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents
8	Click here to download tender document	Tender Documents
9	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Machinery and Tools Tenders

Industrial Plants and Machinery Tenders

Gas Bottling Plant Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Hiring Of Agency For Cng Stations Works On 2 Years Annual Rate Contract Basis At Puri-Ganjam-Nayagarh And Giridih-Dhanbad Ga Of Gail Gas Limited, Noida-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Hiring Of Agency For Cng Stations Works On 2 Years Annual Rate Contract Basis At Puri-Ganjam-Nayagarh And Giridih-Dhanbad Ga Of Gail Gas Limited, Noida-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us