|
| 1 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc and using mechanical compressor to remove all loose dirt etc |
| 2 | M&L for applying evenly priming/tack coat with bituminous primer using paving bitumen VG-30 grade at 5 Kg per 10 Sqm over old black top etc all as specified and directed |
| 3 | M&L for 30mm thick Bituminous premixed semi dense concrete asphaltic carpeting consolidated thickness with 5.5% paving bitument content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tone capacity power roller to a uniforme smooth surfaces as specified and as directed by Engr-In-Charge complete all as specified and as directed. |
| 4 | M&L for premix bituminous macadam laid/rolled and compacted to required gradient and camber & form of requisite height,shape and width for rumbble trip/speed breaker (consolidated thickness 75mm or less) by using paving bitumen @ 4% by weight of total mix any penetration. |
| 5 | Providing and applying 2.5 mm thick road marking strips with 250 gram Glass Beads(retroreflective) of specified shade/colour using hot thermoplastic material by fully/semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoes heater, driven by experoenced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dier, seals, oil, grease and foreign material etc, complete as per direction and accordance with applicable specifidactions as per MoRTH specification having Titatnium -12%, Resin-19% & Intermix Glass Beads - 34 % in proportion. |
| 6 | Supply and fixing aluminium-alloy body Solar stud with following specification :-(a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low sunlight.(b) Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point.(c) 1.2V Ni-MH or Ni-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted inside solar stud.(d) Working time 3 to 4 days successively after the battery is fully charged.(e) Charging time for full charge One full sunny day.(f) Working temperature : 10 to 75 Degree Celcius.(g) Flash rate : 60 to 70 times per minute normally.(h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensure easy and safe night driving.(j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters approx.(k) Solar stud should be free of maintenance and operational in all weather conditions.(i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side of the body to ensure genuinesess.Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank height 65 mm (Total height 90 mm including shank)(m) Weight of the Solar Stud should be 650 Gram approx.(n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface. |
| 7 | Supply and fixing cat eyes with two way solar reflective type with 30 mm length double shank of plastic body of size 100mm x 110mm x 20mm (overall height 50 mm) and with PAMA striplens reflector and weight 164 gram fixed with special epoxy chemical as per manufactures instructions. |
| 8 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 50 mm dia mild steel pipe of 600 mm height duly powder coated, anti rust and anti theft steel net for reflector protection, weight not less than 765 Gms including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 9 | Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete, all as specified. |
| 10 | M&L 75mm thickness PCC 1:4:8 type D-2 (40mm graded stone aggr) as in sub-base complete all as specified and as directed. |
| 11 | M&L PCC 1:2:4 type B1 using 20mm graded stone agg as in coping benching ,side packing ,path etc finished fair and even incl necessary form work etc complete all as specified and directed.. |
| 12 | Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar |
| 13 | M&L for sand filling under floors or in foundation incl watering and consolidation etc all as specified and directed |
| 14 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand |
| 15 | Re- fixing of old Machine pressed precast concrete interlocking block of any shape and size etc complete all as specfied and as directed. |
| 16 | S&F in repairs road safety convex mirror made up of polycarbonate reflactive and body made of ABS/fiber /Plastic of size 1000mm dia fixed over & incl 65mm bore MS pipe of 2.40m length duly powder coated embeded in PCC 1:2:4 of size 45cmx45cmx45cm etc complete all as specified and as directed. |
| 17 | Excavation in post holes ( or similar holes) each n.exc 0.50cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50mtr and making good surface in soft/loose soil. |
| 18 | Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified. |
| 19 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 20 | M&L PCC 1:3:6 type C-2 (40mm graded stone aggr) as in post holes fillings & mass concrete complete all as specified and as directed. |
| 21 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete . |
| 22 | M&L for brick work old size brick sub class 'B' bricks,straight or curved on plan exc 6 m mean radius,built in in CM (1:6) etc complete, all as directed. |
| 23 | M&L rendering 15mm thick in cement plaster in CM 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement .complete all as specified & directed. |
| 24 | M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint by using roller only of approved shade/tint complete all as specified and as directed. |
| 25 | S&F of stainless steel pipe any dia of GRDE 304 framed work such as of pipe s angle tees,flats incl gusset plates etc and welding and or riveting and similar etc complete all as specified and directed |
| 26 | S&F of 4mm thick ACP sheet of any colour/shade as approved and both side covered with recto-reflactive sheet&pasting computerizes size of letter of rectro reflective sheet notexc 30cm in height incl stop commas,short line dashes,hyphens brackets etc as directed and pasted with approved adhesive as in sign bound cut to size and fixed to stainless steel frame incl all necessary fittings arrangement complete all as specified and directed .Note:- Not extra paid for Writing. |
| 27 | M&L for complete removal of old painted cemented surfaces i.e kerb stone etc and preparation of surfaces any description over 10cm in width or girth and applying two coat of exterior paint over priming coat wall of approved shade/tint by using roller all as specified. |
| 28 | S&F in repairs metal tubular dealineator fitted with 2Nos 100mmhighly reflective reflectors made out of PMMA and mounted on 65 mm dia mild steel pipe of 1000 mm height duly powder coated and thermo plastic with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. Please Enable Macros to View BoQ information |
